Pres Posted October 7, 2019 Report Share Posted October 7, 2019 Hi folks, once again it seems the pool of questions is dried up with nothing new offered. Again, I will try to offer a question of interest: How do you prefer to organize your tools for your work areas? I have several work set ups, that I use in the studio. My wedging table does multiple duty and has a few plastic trays that are attached to the front for tools, like the wire cutters and a putty knife for scraping. I also have a shelf underneath that the banding wheel and scale store on. I have a flip down cover that fits tightly over the original surface that is made of plywood to wedge the white clay on, the darker clays on the original concrete surface. I also have two containers stored underneath of magic water. . . one lighter, one darker. I also have a tray near the wall where the table is attached with a brush, and round dowel like rib, and tooth brushes for joining handles and pieces to pots. For throwing, I have a CXC with a stand up square wooden trimming guard that stands in front of the wheel on end. This allows me to set a kitchen wire basket with partitions to hold numerous ribs, stamps and other tools. I also keep a bucket on the wheel tray, and a few most often used tools. When I start trimming, I remove the top kitchen basket, and remove the CXC splash guard to slide the trimming tray in place. On the right of the trimming tray is a magnetic strip where I hand may trimming tools not in use. I also have cabinet next to the wheel with several drawers I can open and retrieve tools or stamping materials as needed. There are many of you out there producing many more pots than I, and have excellent organization skills to set up your work areas. . pass these ideas along! So I will ask once again. . . How do you prefer to organize your tools for your work areas? best, Pres Rae Reich and Hulk 2 Quote Link to comment Share on other sites More sharing options...
liambesaw Posted October 7, 2019 Report Share Posted October 7, 2019 Ugh I need to hear this, I just have a pile of tools on a sheet of plywood balanced on a 5 gallon bucket of slip shawnhar, Rae Reich and Pres 3 Quote Link to comment Share on other sites More sharing options...
LeeU Posted October 8, 2019 Report Share Posted October 8, 2019 (edited) Each of my work stations (for functions in the process) has its own array of most-used tools and assists placed as neatly near by as possible. I use little household bins to hold horizontals and jars for uprights, bowls/catchalls for sponges, hooks for hanging things, carefully chosen shelving, and planned use of spaces under tables. My clay is in 5 gal buckets set on those plant-moving things with wheels, I use carts with drawers to store smalls, labeled by category. I label everything so I can remember what's what (i.e. this shelf is bisque for glazing, that shelf is greenware etc.). I write the type of clay and cone, and type of glaze and cone, on masking tape and put that where I can see it at a glance. I try to put like items together-by size or type or function. I have such a small space and I don't tolerate mess very well, especially my own, that I just have to keep it functional or I get put off and back out when I need to press ahead. It's kind of a mental containment strategy, to keep my studio so that I can walk in and just get to work and have what I need at hand without having to search for things or clean them off first. Edited October 8, 2019 by LeeU Hulk, Stephen, Rae Reich and 2 others 5 Quote Link to comment Share on other sites More sharing options...
oldlady Posted October 8, 2019 Report Share Posted October 8, 2019 both big "tools" in my studio are actually work stations. the slab roller is mounted on a heavy solid cord wooden door on top of a table built for the purpose. i hang many tools off the front of it in a line. i have marked the location of those tools with a sharpie dot so i can reach down without looking and get the tool i want. i return it immediately to the same place so i am free to use the slab roller as an assembly table. the wheel is surrounded by a table and has tools hanging from nails on left and right. these also are returned to their proper location after use so i can get that tool again without searching through a pile of discarded, dirty tools all over the table top. the rest of my studio might have piles of assorted things all over but those work areas are kept very clean. those piles contain very important items i might use. (in other words, my hoard.) two small boxes screwed to the slab roller are for the tiny crumbs that would otherwise stick to the bottom of the fabulously beautiful, extremely expensive things i make. (HAH!) those crumbs are otherwise a darn nuisance. i have an album that shows all this. Hulk, Rae Reich and LeeU 3 Quote Link to comment Share on other sites More sharing options...
Hulk Posted October 10, 2019 Report Share Posted October 10, 2019 Two utensil holders (cylinders), one for throwing tools, the other trimming tools - tools that I actually use - switch places in the wheel's built in tray, right next to the one gallon water bucket; next to the holder are three tools that are used for both activities, needle tool, flexible metal rib, cut piece o' sponge. Right next to the wheel, a small table supports a slop plate (pie plate) that receives bits to be recycled, also a pen, pencil, and a dirty piece of paper to write notes on't'. In front of the wheel, a milk crate supports the other utensil holder, and two polishing/smoothing tools. Most other tools are on tool shelf - spares/duplicates, rarely used tools, glazing tools …in utensil holders, small plastic toolbox. Wire tool (used to have two, hrrmm, have to get another one) sits next to wedge board, mostly, else next to slop plate. Key for me being put the tool in "its place" - and when done for now, cleaned as well. In the machine shop, in the building trades, at the steel mill, in the local JC ceramic studio - have seen, on one hand, folk casting about for a frequently used tool (which may or may not be ready for use), as it/they are put down in different places, depending; on the other hand, folk who snap up the ready tool, as it has "a place!" ...big difference, imo. That said, the extremes of tool organization are demonstrated by beginners through the most experienced and skilled, it seems... Rae Reich, oldlady and Bill Kielb 3 Quote Link to comment Share on other sites More sharing options...
JohnnyK Posted October 10, 2019 Report Share Posted October 10, 2019 One combination of tools is a set of shade brackets mounted on the wall above a desk that I use for a photo station. When not in use as a photo station, I have a large painting on the wall and a wedging platform on the desk, but when I want to shoot photos, I take down the painting, remove the wedging platform, and install a white window shade that I pull down and use for a seamless background to shoot my pieces. When done with the photography, I roll and remove the shade, hang the painting, and put the rest of the stuff back in place. Rae Reich and oldlady 2 Quote Link to comment Share on other sites More sharing options...
oldlady Posted October 10, 2019 Report Share Posted October 10, 2019 hulk, may i suggest a simple replacement for the cutting wire?? i have always hated the ones with wooden toggle handles because they are too long and i have never gotten one out of its package without crimping it. years ago i got some leader wires from walmart's fishing gear section. i think at that time there were 6 of various sizes for about $1. they have ends that fit on a key ring. one without keys, of course. the round rings are sold lots of places, walmart wants too much for the ones in the automotive section. hardware stores are better value. i can use the longer ones but find i really like the 9 inch size and the 12 inch one is perfect for slicing slabs from a new bag of clay. AND THEY DO NOT TANGLE UP! liambesaw, Stephen, Rae Reich and 3 others 6 Quote Link to comment Share on other sites More sharing options...
liambesaw Posted October 10, 2019 Report Share Posted October 10, 2019 43 minutes ago, oldlady said: hulk, may i suggest a simple replacement for the cutting wire?? i have always hated the ones with wooden toggle handles because they are too long and i have never gotten one out of its package without crimping it. years ago i got some leader wires from walmart's fishing gear section. i think at that time there were 6 of various sizes for about $1. they have ends that fit on a key ring. one without keys, of course. the round rings are sold lots of places, walmart wants too much for the ones in the automotive section. hardware stores are better value. i can use the longer ones but find i really like the 9 inch size and the 12 inch one is perfect for slicing slabs from a new bag of clay. AND THEY DO NOT TANGLE UP! If I did put my keys on it I might stop losing my cutoff wires (and my keys) Pres, Chilly and Rae Reich 3 Quote Link to comment Share on other sites More sharing options...
Hulk Posted October 11, 2019 Report Share Posted October 11, 2019 Thanks Lady, been putting off new cutting wires - I want some useful length ones, as you described, with rings, and a few framed ones as well. Quote Link to comment Share on other sites More sharing options...
shawnhar Posted February 11, 2020 Report Share Posted February 11, 2020 I only have like 9 tools, there is no need for organization, lol. Sponge, wire, needle, rib, trimming stick, then after the wet part I just have a 2nds mug with a knife, paintbrush, scratchy tool, trimming tool, and a needle tool that stays out of the wet stuff. I have some more 2nds mugs with other tools but I rarely use them. I have a plastic bin or 2 with tons of stuff I never use. I'm down to only making mugs and spoon rests though, I stopped making anything that doesn't sell, and gave up on trimming the bottoms of the mugs as people don't seem to care. liambesaw and Rae Reich 2 Quote Link to comment Share on other sites More sharing options...
Stephen Posted February 12, 2020 Report Share Posted February 12, 2020 On 2/11/2020 at 8:50 AM, shawnhar said: I only have like 9 tools, there is no need for organization, lol. Sponge, wire, needle, rib, trimming stick, then after the wet part I just have a 2nds mug with a knife, paintbrush, scratchy tool, trimming tool, and a needle tool that stays out of the wet stuff. I have some more 2nds mugs with other tools but I rarely use them. I have a plastic bin or 2 with tons of stuff I never use. I'm down to only making mugs and spoon rests though, I stopped making anything that doesn't sell, and gave up on trimming the bottoms of the mugs as people don't seem to care. ya know I hear ya but the slow movers do sell and those sales are sweet when they happen. If the slow sellers are the more elaborate and higher dollar pots it gives you a chance to stretch and builds the cash register as they sell. We have had some 3 digit pots that take a number of shows to sell but worth it when they do. Rae Reich 1 Quote Link to comment Share on other sites More sharing options...
liambesaw Posted February 12, 2020 Report Share Posted February 12, 2020 I like making those pots most so even though they don't sell, I still like making them. I had a big bowl that I would bring to the farmers market just as a marketing gimmick. People don't see big bowls, so it was like "whoa look at this big bowl". I mean they never bought anything but maybe some day I'll see them again and theyll be like "hey. Big bowl guy!" Stephen and Rae Reich 2 Quote Link to comment Share on other sites More sharing options...
Pres Posted February 13, 2020 Author Report Share Posted February 13, 2020 Yeah, big bowls are lots of fun. Depends on how big they get though. I made one in grad school that was pretty big thrown, even after firing it was 40" in diameter, and 14" tall. What do you do with a bowl that big! My sister-in-law uses it as a magazine rack! best, Pres Rae Reich 1 Quote Link to comment Share on other sites More sharing options...
shawnhar Posted February 13, 2020 Report Share Posted February 13, 2020 I DESPISE making big bowls, the throwing part is great, the glaze failure rate for me is heartbreaking. I can fit 24 mugs in my little 818, if 1 or 2 fail, no biggie. The kiln will only hold 2 big bowls and at least one always fails, they don't fit in the glaze bucket, I suck at the pouring method, crawling, pinholes, too thin, drips if I try to mix colors, it's always something. We did sell a bunch during the holidays and I am down to 2 left, and I have 2 bisqued that haven't been glazed because I dread the failure. Quote Link to comment Share on other sites More sharing options...
liambesaw Posted February 13, 2020 Report Share Posted February 13, 2020 10 minutes ago, shawnhar said: I DESPISE making big bowls, the throwing part is great, the glaze failure rate for me is heartbreaking. I can fit 24 mugs in my little 818, if 1 or 2 fail, no biggie. The kiln will only hold 2 big bowls and at least one always fails, they don't fit in the glaze bucket, I suck at the pouring method, crawling, pinholes, too thin, drips if I try to mix colors, it's always something. We did sell a bunch during the holidays and I am down to 2 left, and I have 2 bisqued that haven't been glazed because I dread the failure. Secret to glazing big bowls is spraying, everything else causes too much glaze to pool in the bottom which can break the bowl or bubble or all sorts of nastiness. I've been really into doing big 2 piece vases and stuff, trying to feather my nest by covering my front garden areas in big pots shawnhar and Rae Reich 2 Quote Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted February 13, 2020 Report Share Posted February 13, 2020 I don’t spray big bowls. I pour the inside and outside separately, and usually add a little water to the glaze to thin it. Go to the dollar store and get some large diameter plastic tubs: it makes life waaay easier. When setting them up in the kiln, place other items evenly around the rim to create a heat sink. Test tiles, shot glasses, mugs, even extra kiln posts. It took my cracking rate down to nothing. Babs, Rae Reich, Pres and 2 others 5 Quote Link to comment Share on other sites More sharing options...
liambesaw Posted February 13, 2020 Report Share Posted February 13, 2020 43 minutes ago, Callie Beller Diesel said: I don’t spray big bowls. I pour the inside and outside separately, and usually add a little water to the glaze to thin it. Go to the dollar store and get some large diameter plastic tubs: it makes life waaay easier. When setting them up in the kiln, place other items evenly around the rim to create a heat sink. Test tiles, shot glasses, mugs, even extra kiln posts. It took my cracking rate down to nothing. If you have a Korean supermarket somewhere near you, I found kimchi mixing tubs to be very cheap and very awesome for glazing. It's like halfway between a laundry tub and a kiddie pool, I can put my big banding wheel inside and harvest all the drippies. Callie Beller Diesel and Rae Reich 2 Quote Link to comment Share on other sites More sharing options...
shawnhar Posted February 13, 2020 Report Share Posted February 13, 2020 I started a new topic so we don't derail this one any further: https://community.ceramicartsdaily.org/topic/21553-glazing-big-bowlslarge-objects/ Pres and Callie Beller Diesel 2 Quote Link to comment Share on other sites More sharing options...
LeeU Posted July 23, 2020 Report Share Posted July 23, 2020 I organize my tools very well, thank you. Just can't seem to keep them from running off. Rae Reich 1 Quote Link to comment Share on other sites More sharing options...
Denice Posted July 23, 2020 Report Share Posted July 23, 2020 I have my cut off wires hung on the wall next to the wheel and a cottage cheese container full of basic throwing tools. I have another container with hand building tools on a separate table Extra tools and misc. are in divided trays that stack inside of each other. I keep my extruder dies in a shoe box on a shelf near the extruder, I also have rolling pins on that shelf and my Skutt thermocouple. I have managed to collect way to many tools, I bought some to fill out a order that my husband was getting from China years ago. They were really cheap, I have purchased some old tools at estate sales, they are my favorite to work with. I will put together a set of tools and a bag of clay for someone who needs it for therapy or just home bound and bored, I even offer to fire whatever they make. My neighbors have three school age children, I offered to give them clay and tools during the shelter in, they turned me down. The mother is a teacher and I have run into teachers that didn't think art was necessary when my son was in school. Denice Rae Reich 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.