Chilly Posted July 17, 2019 Report Share Posted July 17, 2019 (edited) Not so much what's on it, but what fell off it. Before I'd even taken a photo! It was a woven piece, made with trimmings from a mult-layer slip casting. Can't add a photo from my phone - too big, I'll add it later. Edited July 19, 2019 by Chilly Photo added Quote Link to comment Share on other sites More sharing options...
oldlady Posted July 17, 2019 Report Share Posted July 17, 2019 Ooooooohhhhhh........................................... feel your pain......... Chilly 1 Quote Link to comment Share on other sites More sharing options...
Denice Posted July 17, 2019 Report Share Posted July 17, 2019 I am going to finish cleaning my studio today and start throwing molds for my antique glass bottle bottoms tomorrow. The mural they go in is still drying, I am hoping to have them fired and ready for glass before my husband has colon surgery. He has to take it easy for a month so I hope I can fire the glass while he is down. Denice LeeU 1 Quote Link to comment Share on other sites More sharing options...
Min Posted July 18, 2019 Report Share Posted July 18, 2019 Some of 75 assorted mini vases for wedding favours, 60 done, 15 more to do. Hulk, dhPotter, Callie Beller Diesel and 3 others 6 Quote Link to comment Share on other sites More sharing options...
liambesaw Posted July 18, 2019 Report Share Posted July 18, 2019 4 minutes ago, Min said: Some of 75 assorted mini vases for wedding favours, 60 done, 15 more to do. That looks like a fun project! Hmmm, brb, going to add wedding favors to my website Min 1 Quote Link to comment Share on other sites More sharing options...
Min Posted July 19, 2019 Report Share Posted July 19, 2019 7 hours ago, liambesaw said: That looks like a fun project! It is! I like that none of them match, well not intentionally. Opposite of how I usually work. Pres 1 Quote Link to comment Share on other sites More sharing options...
Mark C. Posted July 19, 2019 Report Share Posted July 19, 2019 8 hours ago, Min said: Some of 75 assorted mini vases for wedding favours, 60 done, 15 more to do. Reminds me of making 125- 2 inch baby vases for a friends wedding. Pro bono deal felt great when done-one was at every table place setting for each guest. Pres 1 Quote Link to comment Share on other sites More sharing options...
LeeU Posted July 20, 2019 Report Share Posted July 20, 2019 What's on my workbench? My sister!! She drove up from Virginia. She has been taking some pottery classes in Roanoke. So she loaded her car with greenware (!!) and we bisqued them over the last few days. Now she is glazing her work for the glaze fire. The 05 fire was very lightly loaded with just her items but I have pieces to add for the cone 5 fire, so the kiln will be more balanced and full. She doesn't know I took these pics--I was sneaking around outside the studio (she doesn't like being photographed--opps, too bad!) It has been great fun doing this somewhat "together". Callie Beller Diesel, Chilly, oldlady and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Denice Posted July 20, 2019 Report Share Posted July 20, 2019 It can be nice to have someone work in your studio for awhile. Once in a while I will clear a work table for my husband so he can work on a car part in air conditioned comfort. He isn't working with clay but it is still good to be working with him. Denice Quote Link to comment Share on other sites More sharing options...
Pres Posted July 21, 2019 Author Report Share Posted July 21, 2019 About 5 years before retiring from teaching, I was commissioned to throw 2000 vessels for a religious retreat, the particular even was called "Filling your Vessel". Truth be told I decided to take the job as I needed to improve my skills at throwing off the hump. I would seem to get "s" cracks in everything. By the time I was done, no "s" cracks. They disappeared after about the 300th vessel. Makes life easier today when throwing off the hump. A lot can be learned from repetitive throwing, even though not changing forms is quite boring, IMPO. best, Pres Benzine 1 Quote Link to comment Share on other sites More sharing options...
Denice Posted July 21, 2019 Report Share Posted July 21, 2019 Pres I am counting on my skills improving with throwing the 70 glass molds I need. I did some throwing off the hump in college but none of the pieces were ever fired because it was a class throwing exercise. I was wondering did you need more compression to end the S cracks? I enjoyed throwing off the hump but had a hard time with compression. Denice Quote Link to comment Share on other sites More sharing options...
liambesaw Posted July 21, 2019 Report Share Posted July 21, 2019 Yeah lots of compression and when you grab a ball to start, really sticking with it for a bit before working on it. Stupid S-cracks Bill Kielb 1 Quote Link to comment Share on other sites More sharing options...
Bill Kielb Posted July 21, 2019 Report Share Posted July 21, 2019 37 minutes ago, liambesaw said: Yeah lots of compression and when you grab a ball to start, really sticking with it for a bit before working on it. Stupid S-cracks Isn’t that what the S stands for? Quote Link to comment Share on other sites More sharing options...
liambesaw Posted July 21, 2019 Report Share Posted July 21, 2019 27 minutes ago, Bill Kielb said: Isn’t that what the S stands for? It does now! Quote Link to comment Share on other sites More sharing options...
Pres Posted July 22, 2019 Author Report Share Posted July 22, 2019 On 7/21/2019 at 10:34 AM, Denice said: I was wondering did you need more compression to end the S cracks? I enjoyed throwing off the hump but had a hard time with compression. Denice, compression seemed to be the key, but it was not consistently so. I wondered about that, and went to Hamer for research, and then to several other sources before seeing a video of an Asian potter throwing off the hump. He would create a pancake, then raise the pancake edges up into the walls and complete the throwing and the shaping. Why you would ask, but after Hamer, I knew. The pancake caused the walls to wrap in the corner with no particle irregularity. Partly because the walls were pulled outward first allowing compression, then as turned into the side walls the movement from the base to the wall the particles were aligned. Hard to imagine without images, but it does work very well. best, Pres Min and liambesaw 2 Quote Link to comment Share on other sites More sharing options...
Benzine Posted July 23, 2019 Report Share Posted July 23, 2019 Right now, I've got ten, school mugs, for the new teaching/ support staff for the school year. A couple years ago, my Art Club made over ninety mugs, for all the staff, in my building. We gave them to everyone, for National Teacher's Day, but it was actually just part of my larger plan. I have always wanted to give new teachers a gift, and what better for teachers, than a vessel to hold caffeinated beverages? Aaaaanyway, I figure if I just started giving them to new teachers, the rest of the staff would feel left out. So we had to front load it, and make one for everyone at first. The plan works well in theory, as we wouldn't have to make many, after the initial batches, but we've had some steady turnover with retirements and transfers, the last couple years, so we are still making several each year. GEP 1 Quote Link to comment Share on other sites More sharing options...
Pres Posted July 23, 2019 Author Report Share Posted July 23, 2019 Reposted as I had it in the wrong strand! These are a few from the last load. best, Pres Babs, Callie Beller Diesel, Hulk and 5 others 8 Quote Link to comment Share on other sites More sharing options...
liambesaw Posted July 25, 2019 Report Share Posted July 25, 2019 This week has been fairly frenetic, I'm prepping for a farmers market next Wednesday, and at the same time researching resinous lustres and experimenting with them. Made my first batch of straight bismuth lustre yesterday after months of dissecting trade secrets and obfuscated SDS's, reading research papers and books, etc. There's just not a ton of information available on the science of them. Will be doing my first tests probably tonight to see how close I am, we will see! As far as throwing, I made a bunch of thrown sponge holders, a bunch of succulent platters, and a bunch of small lidded containers, and need to trim them all and bisque them so I can get a glaze firing in this weekend before the market! I finally got all of my ducks in a row, formed a business, established marketing materials and bought a canopy and tables. Only time will tell if it ever pays off! Chilly, Benzine, oldlady and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Benzine Posted July 26, 2019 Report Share Posted July 26, 2019 Best of luck Liam! liambesaw 1 Quote Link to comment Share on other sites More sharing options...
liambesaw Posted July 26, 2019 Report Share Posted July 26, 2019 (edited) So my first resinous lustre test was a success! It was kind of Jerry rigged because I just used stuff I had laying around. I have actual pine resin on its way, along with silver nitrate and some other metal salts to experiment with. All I had was bismuth oxynitrate which is the flux, but it gives a grayish sparkly lustre on its own. Not much to write home about but it fluxed, reduced and bonded to the surface, which is more than I was expecting. I used frankincense resin, turpentine and lavender essential oil and knew right away it was less than ideal because the frankincense wouldn't melt completely, probably from being a little too old and unrefined. Next round should be gooder! Edited July 26, 2019 by liambesaw Quote Link to comment Share on other sites More sharing options...
liambesaw Posted July 26, 2019 Report Share Posted July 26, 2019 (edited) 1 hour ago, Benzine said: Best of luck Liam! Thanks benzine! I got a response from a holiday art and crafts show I applied to last month, they said my work was a little too fancy for their show, which is a bummer because it's just down the street from me and on a weekend im not busy. I'm guessing it's more of a popsicle stick and yarn type of show or something. Having issues finding holiday shows that I can apply to, besides zapplication what else do you guys use to find shows to do? Edited July 26, 2019 by liambesaw Quote Link to comment Share on other sites More sharing options...
oldlady Posted July 26, 2019 Report Share Posted July 26, 2019 liam, do not know what your goal is but if you want a recipe for a simple Luster glaze, try this. 20 g each of frit 3134, dolomite, spodumene, ball clay and silica. the one i have is written for green so add copper carb 6 and zircopax 10. really good looking green but it flattens out texture. makes lots of colors also. liambesaw 1 Quote Link to comment Share on other sites More sharing options...
liambesaw Posted July 26, 2019 Report Share Posted July 26, 2019 36 minutes ago, oldlady said: liam, do not know what your goal is but if you want a recipe for a simple Luster glaze, try this. 20 g each of frit 3134, dolomite, spodumene, ball clay and silica. the one i have is written for green so add copper carb 6 and zircopax 10. really good looking green but it flattens out texture. makes lots of colors also. Resinous lustres are like the bright gold Duncan lustre you can buy for a zillion dollars. They don't require a reducing atmosphere so can be fired in an electric kiln. I'm just screwing around but figured they couldn't be too hard to DIY. I've got the flux and carbon, just need some good metal salts. I have silver nitrate coming Monday, palladium chloride, iron chloride, copper chloride, copper sulfate, cobalt chloride, etc. Probably will pick up stannous chloride, zinc acetate and cobalt nitrate next time I'm at the pottery supply place. Just another thing to experiment with, I can't help but tinker. Quote Link to comment Share on other sites More sharing options...
Mark C. Posted July 27, 2019 Report Share Posted July 27, 2019 My workbench /wheel is now empty after a two week production run that may have been one of my largest output periods ever. The last two kilns are firing now and the van is about 2/3 full for an upcoming big show. This last two kiln loads has my wall fish and odds and ends in them. I plan on a small ceramic break after the show and do some diving before returning to my remodel for a few weeks in August. I'll get back to clay near end of month for fall shows . Now packing for a huge show and a dive trip all in same vehicle . Benzine, liambesaw and Hulk 3 Quote Link to comment Share on other sites More sharing options...
liambesaw Posted July 27, 2019 Report Share Posted July 27, 2019 (edited) 1 hour ago, Mark C. said: My workbench /wheel is now empty after a two week production run that may have been one of my largest output periods ever. The last two kilns are firing now and the van is about 2/3 full for an upcoming big show. This last two kiln loads has my wall fish and odds and ends in them. I plan on a small ceramic break after the show and do some diving before returning to my remodel for a few weeks in August. I'll get back to clay near end of month for fall shows . Now packing for a huge show and a dive trip all in same vehicle . Can't wait! Did another test last night, trying to make an iridescent copper lustre. So close! Came out a little too red for my taste but wow the depth it adds to the glaze is so beautiful!! This recipe was bismuth and iron salts, I think an addition of silver salt will tone down the red and add silver bringing it closer to copper. Hard to capture in photos This weekend I'll be bisquing and glazing lidded jars and sponge holders, last load before farmers market on Wednesday. Edited July 27, 2019 by liambesaw Hulk, Callie Beller Diesel and LeeU 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.