Jump to content

neilestrick

Moderators
  • Content count

    5,493
  • Joined

  • Last visited

About neilestrick

  • Rank
    Neil Estrick

Contact Methods

  • Website URL
    http://www.neilestrickgallery.com

Profile Information

  • Gender
    Male
  • Location
    Grayslake, IL

Recent Profile Visitors

315,118 profile views
  1. Backpack recommendations?

    Spray it off and hang it to dry.
  2. I see. I didn't do the math conversion to realize how small 160g is.
  3. Backpack recommendations?

    I have a couple of rolling duffel bags and carry-on bags that have backpack straps. Nice boxy shape, easy to load. I don't think you'll find anything that can go in the washing machine, though. I wouldn't put any regular backpack in a washing machine.
  4. I don't totally get what you're describing, but when I look at the picture you've posted, the foot it definitely wider than 2 fingers, so I'm confused about the narrow cylinder you say you pull. If the mug in picture is only 2 fingers wide on the inside, then the walls near the bottom are much too thick. On a mug, only two fingers wide would be a very narrow foot, and probably kinda tippy. I think your shaping problems are coming from trying to start from a very narrow cylinder. The further you have to stretch, the more issues you'll have. Try to pull your cylinder wider, closer to the finished diameter, so you don't have to stretch so much. Ultimately, though, it's a matter of practice.
  5. Clean Footrings

    Brushing glazes will stick to wax- there are enough binders in brushing glazes that they can stick to just about anything to some degree. However it will be easier to wipe off than areas without wax. In order to get a good smooth, even application of the glaze inside the foot ring, I would try thinning the glaze. Many commercial glazes (and underglazes) come too thick. You'll get a more even application with 3 layers of thinner glaze than with 2 layers of thick glaze.
  6. Any liquid hand soap (slightly diluted) will work, too. The key is to not make bubbles when you apply it. After the old is made, wash well to remove any soap.
  7. Goldenrod Glaze

    @C.BanksI don't think it was ill advised at all. This is typical for crystalline glazes, I just wanted @Shelly M to know what to expect from that type of glaze.
  8. Goldenrod Glaze

    If this is a crytalline glaze, it will not behave at all like typical glazes. For starters, it has no clay in it, so won't stay suspended in the bucket. Second, crystalline glazes are super runny, to the point that they require a catch basin underneath them to collect them. Firing this cooler, like to cone 6, may solve that problem, but I would still put a dish underneath the first round of tests.
  9. Goldenrod Glaze

    You can also blend stains to get the color you want. Also try changing the opacity of the glaze it's in, as that can change how the glaze reacts.
  10. Goldenrod Glaze

    Why don't you want to use stains? That would be the easiest way to do it. Yellows are difficult at best, without using stains.
  11. learning to use underglaze

    VeeGum-T is used to make this glaze brushable, and to help keep it suspended since it's not all that high in clay. Bentonites will keep it suspended well, but won't help brushability as much. You can use any gum to make a glaze brushable instead. The problem is that gums are organic, and will get eaten up by bacteria in a matter of days. To preserve the gum, and 1/4 to 1/2 of 1% copper carbonate to your underglaze. It will preserve the gum and won't be enough to affect the color. I usually use CMC gum. Mix 2 tablespoons CMC and 1/2 teaspoon of copper carbonate to a gallon of hot water and let it sit overnight, then mix it with a blender. It'll make a gel. Substitute 1/3 to 1/2 of the water in the glaze with the CMC mix. It'll keep it suspended and make it brushable.
  12. Old Damaged Kiln

    You're welcome. Let us know how it goes.
  13. Dragons think pop up shows are good!

    I don't mind pop up shows if they're short and sweet. 3-4 hours, make $300 dollars, it's an easy way to spend half the day and make some money on a day when I don't have anything big planned.
  14. Pyrometer Usage?

    Those little spacers help everything tighten up better, so if you've got them use them. However they're not totally necessary. When I change out thermocouples, I don't remove the screws completely. As you unscrew them part way you can til them to the side and out of the way, leaving them in the holes. Makes putting the TC back in a lot easier.
  15. Pyrometer Usage?

    Yes, those are the spacers, but you don't have to use them. Just screws will work fine.
×

Important Information

By using this site, you agree to our Terms of Use.