Jump to content

Alexclay

Members
  • Posts

    3
  • Joined

  • Last visited

Profile Information

  • Location
    Raleigh, nc

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Alexclay's Achievements

Newbie

Newbie (1/3)

1

Reputation

  1. Yes, they are from powder. They ran at horizontal meeting points but lowering my hold helped a lot, right now it's just bothering the perfectionist in me. I'd love the recipe! Thank you so much!
  2. Thanks both! I did a 10 hour cone 5 with a 20 minute hold at the top. The coyote glaze looks great but on lines where it met some stroke and coat glazes they bled, which is not something I’ve seen. I’m running an additional test with a shorter hold, hoping that helps with the running lines since I need them to be pretty crisp for the project I’m working on.
  3. Hi! I have a new evenheat kiln and just mixed my first batch of coyote white cone 5-6 glaze. I’m running a test glaze kiln tomorrow but am conflicted on what schedule I should use. In the past I’ve used the preprogrammed cone 6 and have tested 10 hours and 13 hours with a very short soak at the top. Coyote recommends cone 5 with a 30 minute soak, I assume to get close to cone 6 but not over fire. My question is how long of a fire would you recommend? I have the preprogrammed options of 7 hours, 10, or 13. I’m worried about pinholes so my instinct is 10 or 13 hours but that would be a slower ramp up. Any advice for coyote glazes?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.