-
Posts
12,362 -
Joined
-
Last visited
About neilestrick
Contact Methods
-
Website URL
http://www.neilestrickgallery.com
Profile Information
-
Location
Grayslake, IL
Recent Profile Visitors
333,012 profile views
neilestrick's Achievements
Advanced Member (3/3)
7k
Reputation
-
Hi @Wtimmins What upgrade are you referring to? How many thermocouples does the kiln have? Make sure it's set for the correct number of thermocouples. Does it take the program ok, and how long does it fire and how hot does it get before you get the LAG error code?
-
neilestrick reacted to a post in a topic: Kiln identification
-
ChrisC reacted to a post in a topic: Kiln identification
-
neilestrick reacted to a post in a topic: Gas or Electric Kiln For Starting Out
-
There's certainly a lot about it that looks like Paragon, but also a lot that doesn't. The inside of the control box looks very Paragon. could be they made it to someone else's specs. For comparison, the L&L and Skutt kilns of that size pull 48 amps and are rated to cone 10. They are a bit overpowered, though, because the 27" tall version also pulls 48 amps and is rated to cone 10. The Paragon TNF233, which this kiln may very well be, is rated to cone 10 at 40 amps. I would definitely contact Paragon and see what they think. You have solid state relays. Are there any mechanical relays in there, too, that function as safety relays? Are your bricks 2.5" thick or 3" thick? That will affect the peak temp as well.
- 18 replies
-
- kiln
- top loader
-
(and 1 more)
Tagged with:
-
Whythatfam reacted to a post in a topic: Gare K-10 Kiln
-
ChrisC reacted to a post in a topic: Kiln identification
-
Rae Reich reacted to a post in a topic: Gare K-10 Kiln
-
It will pull 17 amp regardless of which switch is in there. The elements determine how many amps the kiln pulls. The issue is that we don't want to run 17 amps through a 15 amp switch. What model is the kiln? How many element does it have? Post some pics of the current switch, the serial plate, and also open up the control box (unplug the kiln first) and takes some pics so we can see how it's wired. If the switch is indeed dead, there may be other options depending on how it's set up.
-
The bricks look similar to Paragon, but a lot of kilns are made that way. Without seeing them in person I couldn't say if that blue kiln is a Paragon or not. What type of connectors does it use for the element feeder wires? The control box does not look like a Paragon to me because the vent holes are not the same. Paragon uses louvers, not holes, and a different color blue. Paragon elements may fit it, but they may not. Can you post a picture of the bricks where the elements transition from one row to the next?
- 18 replies
-
- kiln
- top loader
-
(and 1 more)
Tagged with:
-
Does it have a Kiln Sitter? Start with the lid propped open an inch or two. 1. Bottom switch on. Wait 1 hour. 2. Second from bottom switch on. Wait 1 hour. 3. Close lid. Wait 1 hour. 4. Next switch on. Wait 1 hour. 5. Top switch on. If it has a Kiln Sitter, wait for the cone to bend the kiln shuts off. If it doesn't have a Sitter, you'll have to put cones in the kiln and watch through the peephole for them to bend.
-
Brian_Ire reacted to a post in a topic: Beginner question re saggar firing
-
Hulk reacted to a post in a topic: Gas or Electric Kiln For Starting Out
-
Normally I'd say yes, letting it sit for years can cause problems with glazes. Specifically, the level of solubles in the glaze water. However your shino already has a ton of solubles, so I don't think it will be a big issue. I'd look at the kiln setting first. You won't get good carbon trapping if you didn't create enough carbon or did it too late in the firing. You also need to let the pots dry well, so the salts have time to migrate to the surface.
-
Rae Reich reacted to a post in a topic: Extreme shivering off underglaze
-
Since it is happening with different colors of different brands, and different glazes, the problem is not with the underglazes or the glazes themselves, but rather the clay. When you say you've used 3 different white clays, what is the max firing temp for those clays? Were they all rated to 1300F? If so, that may be part of the problem. Using a clay that is made to mature at the temperature you're glaze firing to may solve the problem. When glaze firing to cone 05, were you using a body specifically made for low fire? Does the underglaze shiver if i you don't put a clear glaze over it? Adding kaolin to slip is problematic, and adding slip at the wrong time (too dry) can also cause problems. One other possibility, do you have lotion/moisturizer on your hands while touching the bisque? I've seen that cause crawling, but I suppose it could also cause shivering.
-
Roberta12 reacted to a post in a topic: L&L vs Cone Art Kilns
-
ChrisC reacted to a post in a topic: Kiln identification
-
HenryBurlingame reacted to a post in a topic: L&L vs Cone Art Kilns
-
A 4 minute difference and a very small difference in the cone is incredibly accurate for one of these kilns. No worries whatsoever with those results.
-
Gas or Electric Kiln For Starting Out
neilestrick replied to HenryBurlingame's topic in Equipment Use and Repair
As I mentioned in your other thread, cone 10 in a gas kiln is not the same as cone 10 in an electric kiln. It's about atmosphere, not temperature. There is no difference between cone 6 electric and cone 10 gas in terms of durability or quality of work. There are a small handful of glaze types that require a reduction atmosphere for them to work, and therefore need a gas kiln, but other than that you can do just as much in an electric kiln. Cone 6 has the benefit of more stability with colors, and a lot more options with commercially available glazes. If you really like shino and tenmoku glazes, you need cone 10 reduction. They will not work in an electric kiln. If you don't have experience in firing a gas kiln, it's going to be a long hard learning curve, and a lot more expensive to get started. If you want faster success and a simpler process, go electric. -
You can't go wrong with either one. They are very similar in construction aside from the element holders. Both have zone control, neither one requires element pins. The L&L will be easier to replace bricks, but if you're careful with your kiln you won't need to do that. There's very little reason to fire to cone 10 in an electric kiln unless you're doing crystalline work. Glazes won't turn out the same as if fired in a gas kiln to cone 10, because most cone 10 glazes are made to fire in reduction. If your'e firing in oxidation, cone 6 is a much smarter way to go. Your kiln will last longer, your elements will last longer, and your firing and maintenance costs will be much lower. If you are going to do crystalline work, then the L&L JH model is the way to go. It's rated to cone 12, is built with K26 bricks, and has type S thermocouples, so it can handle the high temps much better. Shop around for best pricing. 'Packages' aren't always the best deal. Since you're in Washington, I highly recommend calling Rob Battey at Northwest Potter's Supply if you go with the L&L. He's a great guy and has been providing tech support for L&L for years.
-
If you measure the resistance of the elements you can calculate the amperage draw. AFAIK it's not a Paragon, although the color is different. Pacific Kiln is a company in California, which may or may not be the same company. Their web site doesn't show any studio size kilns, but it might be worth sending them an email.
- 18 replies
-
- kiln
- top loader
-
(and 1 more)
Tagged with:
-
Also make sure your bat pins are tight.
-
The knocking is likely from the bat slipping. The oblong hole is not ideal, but that's how Brent makes them. There are other bats on the market that do not have oblong holes, like Northstar, but another solution is a BatMate or Bat Gripper. There's a few on the market but I know Xiem and Bailey both have a version. It's a think piece that sits under the bat and gives it more grip. My students love them.