Kristin_Gail Posted February 7, 2013 Report Share Posted February 7, 2013 My studio construction is lagging far behind schedule, and I'm now finding myself over-planning and re-thinking the innards while I wait for walls. I had it all planned out, the flow of clay from wet to wheel to dry to glaze to kiln ... Then I started looking at old CM, SP, PMI, CT magazines ... and it appears I'm the only fool who sits at a wheel with my back to the wall. If I went this route, I'd be making a fair amount of changes in the layout (which would be easy, as it's empty now). But about that wheel: Is it all a matter of having solid shelving surrounding you on three sides? Is that why so many potters face the wall? There's something about this positioning that feels uneasy to me. But obviously there's a reason for it. Please do enlighten me. Link to comment Share on other sites More sharing options...
Lucille Oka Posted February 7, 2013 Report Share Posted February 7, 2013 No, my wheel faces a doorway and there is a doorway behind me and a table to my right and a window beyond that for northern light but it is facing west. Shouldn't this post be in the weekly question for CAD? Have your wheel where it feels most comfortable for you. There are no set equipment placements and the layout is for your comfort. Link to comment Share on other sites More sharing options...
OffCenter Posted February 7, 2013 Report Share Posted February 7, 2013 My studio construction is lagging far behind schedule, and I'm now finding myself over-planning and re-thinking the innards while I wait for walls. I had it all planned out, the flow of clay from wet to wheel to dry to glaze to kiln ... Then I started looking at old CM, SP, PMI, CT magazines ... and it appears I'm the only fool who sits at a wheel with my back to the wall. If I went this route, I'd be making a fair amount of changes in the layout (which would be easy, as it's empty now). But about that wheel: Is it all a matter of having solid shelving surrounding you on three sides? Is that why so many potters face the wall? There's something about this positioning that feels uneasy to me. But obviously there's a reason for it. Please do enlighten me. You should never have your wheel facing a wall. That's just asking for someone to sneak in and shoot you in the head. Jim Link to comment Share on other sites More sharing options...
Mark C. Posted February 7, 2013 Report Share Posted February 7, 2013 There are no rules for this- its where it makes the most sense for you. When I had one wheel it was in front of a window with shelves on 3 sides-now In the throwing room my throwing wheels face a 6 foot window with flat surfaces on 3 sides and my trimming wheel faces a wall in a corner with 2 sides-I have a stoneware wheel in other room near a window. I tend to like a window as I'm in the studio so much every now and then looking out at the birds and bamboo does me some mental good.I'll see if I can find a photo. Mark Link to comment Share on other sites More sharing options...
Peter Posted February 7, 2013 Report Share Posted February 7, 2013 My studio construction is lagging far behind schedule, and I'm now finding myself over-planning and re-thinking the innards while I wait for walls. I had it all planned out, the flow of clay from wet to wheel to dry to glaze to kiln ... Then I started looking at old CM, SP, PMI, CT magazines ... and it appears I'm the only fool who sits at a wheel with my back to the wall. If I went this route, I'd be making a fair amount of changes in the layout (which would be easy, as it's empty now). But about that wheel: Is it all a matter of having solid shelving surrounding you on three sides? Is that why so many potters face the wall? There's something about this positioning that feels uneasy to me. But obviously there's a reason for it. Please do enlighten me. You should never have your wheel facing a wall. That's just asking for someone to sneak in and shoot you in the head. Jim Oh, I always wondered what the mirror was for.......................... Link to comment Share on other sites More sharing options...
Mark McCombs Posted February 7, 2013 Report Share Posted February 7, 2013 My wheel is in the corner of the room facing a wall with a window. Nice to be able to see out. Link to comment Share on other sites More sharing options...
trina Posted February 7, 2013 Report Share Posted February 7, 2013 I am a window girl... Link to comment Share on other sites More sharing options...
Natania Posted February 7, 2013 Report Share Posted February 7, 2013 I had the same quandary in my new studio. I started out facing the room and the doorway, but realized that if I turned around I had more places within reach to hang tools, and I could prop a mirror to see the silouettes of pieces I'm throwing (and keep a lookout for gunmen). There is a window to my left though, so not sure if I would have done that without the window... Link to comment Share on other sites More sharing options...
atanzey Posted February 7, 2013 Report Share Posted February 7, 2013 I have one wheel facing the wall (which also happens to have a window) and one wheel facing out into a room with no windows (two separate work areas). I don't see any big functional differences with either. I don't have wall mounted shelves. The wheel facing the wall seems to be easier to get under to clean, but that's probably just this particular setup. I would consider what you'd rather see when you look up, or if there's anything in the room you need to keep an eye on (other people, pets, etc.), along with your shelves, bat storage and tool area. Link to comment Share on other sites More sharing options...
Marcia Selsor Posted February 7, 2013 Report Share Posted February 7, 2013 My wheel faces the window. Nice view. Marcia Link to comment Share on other sites More sharing options...
minspargal Posted February 7, 2013 Report Share Posted February 7, 2013 I also face a window. Link to comment Share on other sites More sharing options...
kathi Posted February 7, 2013 Report Share Posted February 7, 2013 I face the front of the studio, which is mostly glass doors and windows. My roosters come up to the window and visit. Link to comment Share on other sites More sharing options...
Pres Posted February 7, 2013 Report Share Posted February 7, 2013 My studio construction is lagging far behind schedule, and I'm now finding myself over-planning and re-thinking the innards while I wait for walls. I had it all planned out, the flow of clay from wet to wheel to dry to glaze to kiln ... Then I started looking at old CM, SP, PMI, CT magazines ... and it appears I'm the only fool who sits at a wheel with my back to the wall. If I went this route, I'd be making a fair amount of changes in the layout (which would be easy, as it's empty now). But about that wheel: Is it all a matter of having solid shelving surrounding you on three sides? Is that why so many potters face the wall? There's something about this positioning that feels uneasy to me. But obviously there's a reason for it. Please do enlighten me. My wheel faces a window from the opposite side of the room. Behind me is and old workbench, with lower shelves where I put place tools at times. The view out the window allows good view of the back deck, and the weather. When teaching, I never had a window in my room so I never knew what the weather was until the end of the day 5pm or 10pm when I got out of the building. Real luxury today. Link to comment Share on other sites More sharing options...
Marcia Selsor Posted February 7, 2013 Report Share Posted February 7, 2013 I have a 10" x 20" vertical mirror to the left of the window. This is so I can see the shape of what I am throwing without getting off the wheel. I think it is an advantage. Marcia Link to comment Share on other sites More sharing options...
TJR Posted February 7, 2013 Report Share Posted February 7, 2013 My new studio has windows on all four sides. Two are high up to allow for light without people seeing in. My wheel backs onto a wall where my ware is placed. To the left, I have a low table with all my bats underneath and clay on top.It is to the left of my wedging table, so there is a bit of a flow. The two doors are on the opposite side of the room. One is frozen shut. It never occurred to me to place my wheel where I could see someone coming in to shoot me. I don't generally like having my back to the action. TJR. Link to comment Share on other sites More sharing options...
SShirley Posted February 7, 2013 Report Share Posted February 7, 2013 Just yesterday I moved both wheels to face the windows. No great view there - they face the alley, but I will get lots of sunlight. Probably too much. We'll see. I may be moving back eventually. Link to comment Share on other sites More sharing options...
Guest JBaymore Posted February 7, 2013 Report Share Posted February 7, 2013 My main throwing wheel sits looking out custom windows that I installed a bit low so that they provide a good view of the Souhegan River driectly in front of me with a sloping hillside on the other side of the river, the gas kiln just off to the left, and the nobiorigama a bit further away off to the right. The working setup has a heavy 3" thick pine shelf/deck located surrounding the wheel on three sides (and the identical throwing station to the right of it) and is designed so that wedged clay sits to the right of the wheel on the deck and there the deck as well as a pegged removable shelf ware rack above it to the left of the wheel that I can reach without moving much. Work flow right to left. It is pictured in Steven Branfman's "Potters Professional Handbook". best, ......................john Link to comment Share on other sites More sharing options...
Denice Posted February 7, 2013 Report Share Posted February 7, 2013 When I took throwing in school all of the wheels faced the wall, the instructor said it would be helpful to have a mirror on the wall close to the wheel if we had one at home. I guess that's how I got started facing the wall. My wheel is in a corner with a shelf on one side that I find very handy and a south window, the window lets in a lot of sunshine but to much to work in and the view is of the neighbors garage. I could move my wheel and have some great scenery, but I'm easily distracted and would prefer not to know what a great day is it outside. You should put you wheel where you are the most comfortable. Link to comment Share on other sites More sharing options...
neilestrick Posted February 7, 2013 Report Share Posted February 7, 2013 You all have windows in your studio?!? I suppose you all have air conditioning, too? Spoiled rotten potters.... Link to comment Share on other sites More sharing options...
Meg Posted February 7, 2013 Report Share Posted February 7, 2013 I started out with my back to the windows, facing the room. I have a tiny studio and everything is very tight together so I had to squeeze by the wheel in order to sit down. But I kept it that way until recently, because I liked the shelving on my right side (I'm right handed). Now I'm facing the windows, and I cut myself a shelf-board that fits around the splash-pan, made from plywood, to hold my tools. I have spent a ridiculous amount of time over the years standing around re-examining the layout and rearranging so I could fit in another piece of equipment or set of shelving. My studio is 15' x 15' and I have a 16 cu. ft kiln, a 3.7 cu. ft kiln, a pugmill, a slab-roller, 2 wheels, a long work-table, and 5 shelving units (~3' each) in there. Don't ask me how. Link to comment Share on other sites More sharing options...
neilestrick Posted February 7, 2013 Report Share Posted February 7, 2013 You can fit an amazing amount of stuff in a small space. Open floor space is not very necessary in a studio. My old studio was 8x15, with a kickwheel, oval electric kiln, 4 cu/ft electric kiln, two wedging/work tables, all my glaze materials, glaze buckets, clay storage, etc. I didn't store any supplies outside of the studio. All my shelves were built onto the walls, which opened up floor space for clay boxes, glaze buckets, and tubs of glaze materials. I loved that studio. Cozy. Link to comment Share on other sites More sharing options...
kathi Posted February 7, 2013 Report Share Posted February 7, 2013 You all have windows in your studio?!? I suppose you all have air conditioning, too? Spoiled rotten potters.... Air conditioning AND heat! Link to comment Share on other sites More sharing options...
Brian Reed Posted February 7, 2013 Report Share Posted February 7, 2013 My wheel is smack dab in the middle of my space. I recently made a video of my new setup Link to comment Share on other sites More sharing options...
Edith Marie Posted February 7, 2013 Report Share Posted February 7, 2013 My studio in currently in the basement of our house and my wheel is set up facing a corner, with a tarp on the floor and up both walls. I have tools and other misc. items around, think I will add a mirror, great idea....there is a small window at the top of one wall so natural light can come in.....come into my house with a gun and intention to do harm, leave in a body bag...intruder beware.... Edie Link to comment Share on other sites More sharing options...
Diane Puckett Posted February 7, 2013 Report Share Posted February 7, 2013 You all have windows in your studio?!? I suppose you all have air conditioning, too? Spoiled rotten potters.... Air conditioning AND heat! AC and heat but no water. I really don't need the AC, wish plumbing were an option. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.