-
Posts
5,654 -
Joined
-
Last visited
Reputation Activity
-
Pres reacted to liambesaw in hand-building and throwing with arthritis, suggestions
Yikes! I hope stem cell joint therapy is finally FDA approved by the time I get arthritis. I know I can't afford it now, but there's a chance in the future I could if insurance covered part! Amazing how you can regrow cartridge with those therapies, and despicable how they are keeping it unapproved to make money.
-
Pres reacted to Babs in QotW: What have you done of late that makes you think "Done well" or pat yourself on the back?
Recently succumbed to teaching pottery longtime ago student . Not the pat bit, this means I cleaned mny shed, pat, pat ,and pat and am throwing out, organising resources, weedingbout buckets of glazes And labelling stuff very clearly, memory not what it was.
Thank you S for asking the old bat for lessons. She asks great questions, makes teaching oh so easy.
-
Pres got a reaction from BARAKE SCULPTOR in What’s on your workbench?
Wedding jar completed except for cleanup a little after it sets up some more.
best,
Pres
-
Pres got a reaction from BARAKE SCULPTOR in What’s on your workbench?
Glazing today, bisque is just turned off. Glaze load goes in tomorrow, then another on Tuesday. This is today load that I have finished glazing though the pic was taken this morning before.
best,
Pres
-
Pres got a reaction from Mark_H in What’s on your workbench?
Busy glazing once again, Honey Jars this time to be out on Thursday for trip Friday.
best,
Pres
-
Pres reacted to liambesaw in What’s on your workbench?
I had a great time last weekend glazing a full 8 piece dinnerware set. Opened the kiln a few days later to crawling on 75% of it. I had a feeling something awful would happen when I saw a few cracks in the glaze; smoothed the cracks in and fired anyway.
So this weekend I'm throwing another 8 piece dinnerware set and defloccing the glaze this time.
-
Pres reacted to Sorcery in QotW: What is the silliest thing you have done or seen done dealing with Ceramics?
I dropped a needle tool in my lap yesterday. To keep it from falling on the floor, I closed my legs real fast.
Now there is a hole in my leg!
But I the tool didn't hit the floor!
Sorce
-
Pres reacted to Benzine in QotW: What is the silliest thing you have done or seen done dealing with Ceramics?
I think it's awesome!
I've actually thought about doing that in my classroom with students. I'd probably start by making one myself, and then have a volunteer make one for each subsequent firing.
-
Pres got a reaction from Benzine in QotW: What have you done of late that makes you think "Done well" or pat yourself on the back?
@JohnnyKThat is not a little pat on your back, take a bow! Major applause!
best,
Pres
-
Pres got a reaction from Hulk in QotW: What have you done of late that makes you think "Done well" or pat yourself on the back?
Hi folks, there has not been a new question occuring in the QotW pool so I will bring forth a new one. I have been getting back into the shop of late as I have started bowling again and time is limited. However, I was assembling chalices, both pouring and regular, for communion sets, and found them going together very well, with the use of the a slight change in plumbing chuck on the GG. My original chuck had a taller rise of @10". I decided I did not need that height for the stem to fit into when trimming them, so I cut off 4" to make the pipe section 6" tall. Much more stable, and easier to use. Still have longer 8" section if needed. Big improvement with a little tweaking has made trimming the stems easier, and thus the whole assembly process is easier. My pat on the back!
So what have you done of late, small or large that you can say "Well Done" or as a QotW: What have you done of late that makes you think "Done well" or pat yourself on the back?
best,
Pres
-
Pres reacted to JohnnyK in QotW: What have you done of late that makes you think "Done well" or pat yourself on the back?
The recent PBS Juror's Award for my Horsehair Raku submission and the follow up interview with a local news source has been my recent pat on the back!
-
Pres reacted to Hulk in What’s on your workbench?
From Labor Day's glaze firing
Clockwise, top left,
Test tiles for "waste" glaze (retained, settled, sieved and adjusted cleanup, wipe off, etc. - just over 1.5 gallons; it's "free!"), crazes over these clays, may fit buff and red clays better, tbd
New lower expansion liner glaze (per recent entry to https://community.ceramicartsdaily.org/topic/19922-clay-composition-and-crazing), goes on well, looking good so far - more testing required. I'm not minding the specks, which may be from petalite, as all the other ingredients have been used in previous low expansion trials...
Am still liking the Lakeside Clear Blue, here over white clay; the lower part is BVG Rutile Green, which mutes the carved red slip - will be trying this again.
Really liking this tin chrome red, here over Cassius. This firing, no bloating in the black clay pieces, likely due to extended bisque (longer holds at critical temps).
Selsor Faux Celedon (with some minor coe adjustment) over buff clay - really like this look.
-
Pres reacted to Hulk in What’s on your workbench?
More from Labor Day glaze fire,
Clockwise, from top left
Tortilla warmer in Cassius. I took a closer look (with magnification), see now that the clear glaze that "clears" the bubbles fairly well over the black clay also crazes (my vision ain' great); have finished the one bag, may not buy more...
Storage jar, ~7.5 inches tall, same Rutile Green
The two mugs are same Selsor Faux Celedon, same white clay - the seven o'clock one is from previous bisque and glaze firing, the five o'clock one appears similar (the colours are actually about the same - camera settings, not), but very little crazing, just a few spots! Hard to believe that firing (more thorough bisque and a bit cooler glaze with slower initial cooldown) could make that much difference!? Same clay, same glaze. ...more testing...
-
Pres reacted to Hulk in What’s on your workbench?
More from Labor Day glaze fire,
Clockwise, from top left
Covered dish, just over a quart.
Same Rutile Green.
Five of fifteen small bowls in red clay (SRF).
Overall, am happy with this load! Still working on tossing pieces to reclaim that don't look and feel "right" - making progress there. Detailed notes are definitely helping! Looks like a longer bisque and a bit lower glaze fire target temp (plus slower cool to ~1850) has cleared up a few issues. Also looks like lower expansion clear is working on the cafe as well as the two white clays. Not decided yet on continuing to work in the red clay, perhaps just thin layer of slip over the better behavin' buff, and white (and somewhat behavin' cafe) clays. Can definitely see where calculated coe numbers could be deceptive - as a comparison/guide, where making limited adjustment to a glaze, helpful; for comparing glazes that have very different recipes, not as helpful.
-
-
Pres reacted to oldlady in QotW: When slab building, do you use a form , work from a template, or from scratch?
continued from above. sorry, cannot find the next photo, got hundreds and though i had it yesterday, i cannot find it now.
will edit this when i find it.
found one that will continue though it is not of the birds. can't work it in edit, see below.
-
Pres reacted to LeeU in QotW: When slab building, do you use a form , work from a template, or from scratch?
Funny--this is what I did today with some slab trimming scraps---I'll make hundreds and they will be gifts for the staffs of my favorite local non-profits
-
-
Pres got a reaction from Babs in QotW: When slab building, do you use a form , work from a template, or from scratch?
Hi folks, no new questions in the question pool, so I will pose one for you hand builders.
QotW: When slab building, do you use a form , work from a template, or from scratch? I used to teach all ages of children during my career, either HS when in the regular year, or middle school and elementary in Summers and after regular school hours. During this time I taught using slump molds, hump molds, rock forms, and other ways of creating pottery over a form with a slab. I also taught my HS students to do front, side and top projections to base measurements on to create geometric forms like fairy houses and other things. I never taught my favorite way of constructing with slabs which was to do a planning sketch of what I wanted to build and then roll out a few slabs and start working to create the sketch. These usually ended up quite detailed, and at the same time took hours, but as a side project when teaching the kids, it got them to be a little more innovative in their own forms.
Once again, I will ask When slab building, do you use a form , work from a template, or from scratch?
best,
Pres
-
Pres reacted to JohnnyK in QotW: When slab building, do you use a form , work from a template, or from scratch?
All three...depending on what it is that I'm fabricating.
-
Pres reacted to Denice in QotW: When slab building, do you use a form , work from a template, or from scratch?
I started out making pots in cardboard containers like oatmeal boxes and then I moved onto slabs. After a while I wanted to make a series so I started working with hump and slump molds, I even worked with canvas slump molds. Right now I am making tile so I guess I am back to slab. When I finish this project I am going to do some throwing, I am losing the feeling in my fingers on my left hand. This is quite common with people who have MS. Maybe some throwing will help retrain my nerve pathways! Denice
-
Pres reacted to Dottie in hand-building and throwing with arthritis, suggestions
I gave both sets of instructions to my husband, who's excited about the project, so he'll probably be making one or the other for me. I'll let you know when (if) it happens. Thanks so much for your help.
Dottie
-
Pres got a reaction from rox54 in hand-building and throwing with arthritis, suggestions
Tough decisions as we get older @Dottie. Most o f this is personal decision, but I will let you know what I have been doing. Retired 2009, do part time pottery mostly in the non Winter months. I have had cysts, with bone spurs, one operated on, and it killed the joint on the rt thumb. I recycle all my clay with wedging, and throw most of my pieces. I used to pull handles with my rt hand, but now use an extruder to make handles for mugs and other pieces that require handles. I used to take NSAID for pain, mostly just before bowling, as I am an avid bowler at 3 times a week. I have found that the pain of the hands goes away when I am using them. The more I use them the longer the pain seems to stay away. However. as I used to teach most handbuilding techniques in HS, I know how much the pinch pot forms can affect the hands, especially as you get older. Maybe you could resort to a hybrid form with coils, or extruded forms working on the sculptural pieces that way. I think if you love what you do you will find ways to adapt.
best,
Pres
-
Pres reacted to LeeU in hand-building and throwing with arthritis, suggestions
Seems like a medical question---personally I would want to do some research into the specific condition and choose carefully what type(s) of health practitioner(s) I consulted. Mainstream medicine did nothing for the type of arthritis I have, in a segment of my neck/shoulder, and in my right hand, but a year of (insurance-covered) expert chiropractic treatment reduced it significantly, proven by x-rays. It is not gone, of course, but in over 3 years it has not progressed from that reduction and is nowhere near the pretreatment degree of pain and restriction of movement. I am absolutely not offering a medical opinion--just sharing what has been the case for me, which has been counter to what I was being told by M.D.s., including that progression was inevitable. Keeping my hand/fingers/wrist moving-including working with clay-is a recommendation for my ongoing flexibility. I do not throw very often; I handbuild. My most significant restriction is wedging, and I have found that the cut & slam method is the best technique for me.
-
Pres got a reaction from GEP in hand-building and throwing with arthritis, suggestions
Tough decisions as we get older @Dottie. Most o f this is personal decision, but I will let you know what I have been doing. Retired 2009, do part time pottery mostly in the non Winter months. I have had cysts, with bone spurs, one operated on, and it killed the joint on the rt thumb. I recycle all my clay with wedging, and throw most of my pieces. I used to pull handles with my rt hand, but now use an extruder to make handles for mugs and other pieces that require handles. I used to take NSAID for pain, mostly just before bowling, as I am an avid bowler at 3 times a week. I have found that the pain of the hands goes away when I am using them. The more I use them the longer the pain seems to stay away. However. as I used to teach most handbuilding techniques in HS, I know how much the pinch pot forms can affect the hands, especially as you get older. Maybe you could resort to a hybrid form with coils, or extruded forms working on the sculptural pieces that way. I think if you love what you do you will find ways to adapt.
best,
Pres