oakhillstudio Posted September 30, 2012 Report Share Posted September 30, 2012 Hi folks, I was wondering if anyone could recommend a good spray gun. I have a general purpose one but it only has fan shaped spray. Link to comment Share on other sites More sharing options...
OffCenter Posted October 1, 2012 Report Share Posted October 1, 2012 Hi folks, I was wondering if anyone could recommend a good spray gun. I have a general purpose one but it only has fan shaped spray. TCP Global has a 10 piece HVLP spray gun set for $100. You get 3 guns (1.8mm tip, 1.4mm tip, 1.0 tip) The 1.0 tip is a detail gun. An option for someone just getting started is Harbor Freight's HVLP Spray Gun Kit for $129. It's a good all-purpose gun that doesn't need a compressor. It works great if you don't need a detail gun. Jim Link to comment Share on other sites More sharing options...
perkolator Posted October 4, 2012 Report Share Posted October 4, 2012 detail stuff i'd recommend an airbrush. for large areas any decent sprayer should do the trick but usually gravity feed is preferred for spraying minerals/glaze through it. in our studio i've got a very cheap auto parts store siphon feed set that came with a large and small sprayer - seems to work pretty well actually and has been student-proof for several years, surprisingly. for an inexpensive sprayer that will spray almost any consistency material is the "critter" siphon feed sprayer - that thing is amazing! and will accept mason jars or small plastic mayo jars as the res. Link to comment Share on other sites More sharing options...
missholly Posted December 30, 2012 Report Share Posted December 30, 2012 so, what about a compressor with a tank vs. a tankless? I've read that the compressor with a tank takes time to fill up, is loud but offers a smoother spray. (tankless uses pistons, which interrupt the flow of paint/air) how important is a 50 psi compressor? most that I'm seeing under $100 are 25-30. is this acceptable? i have an inflator/compressor that i got at lowes for $40. the only thing I'm stuck on is the link between the compressor hose (it has a cap on the end with a plastic lever that is for inflating tires) and my airbrush hose. is there an adapter? or should i just give up and get a compressor specifically for airbrushing? Link to comment Share on other sites More sharing options...
DAY Posted December 30, 2012 Report Share Posted December 30, 2012 Harbor Freight has lots of compressors, hoses, adapters, and spray guns. Shop on line, if one isn't close to you. Link to comment Share on other sites More sharing options...
OffCenter Posted December 30, 2012 Report Share Posted December 30, 2012 Harbor Freight has lots of compressors, hoses, adapters, and spray guns. Shop on line, if one isn't close to you. Or look at the 2nd post in this thread. Link to comment Share on other sites More sharing options...
OffCenter Posted December 30, 2012 Report Share Posted December 30, 2012 so, what about a compressor with a tank vs. a tankless? I've read that the compressor with a tank takes time to fill up, is loud but offers a smoother spray. (tankless uses pistons, which interrupt the flow of paint/air) how important is a 50 psi compressor? most that I'm seeing under $100 are 25-30. is this acceptable? i have an inflator/compressor that i got at lowes for $40. the only thing I'm stuck on is the link between the compressor hose (it has a cap on the end with a plastic lever that is for inflating tires) and my airbrush hose. is there an adapter? or should i just give up and get a compressor specifically for airbrushing? Most likely you'll be wasting your time trying to convert the tire inflator. For an airbrush the cheaper compressor will probably work but for larger sprayers you need a better compressor and I think an airbrush works better with higher psi, too. Depends on airbrush. If you're going to do anything more than detail work with glazes, you need more than an airbrush so the cheapest option if you don't own a good compressor is the Harbor Freight $129 spray gun set that doesn't need a compressor. That gun is fine for overall glaze application but not for detail. See 2nd post in this thread for more info. Link to comment Share on other sites More sharing options...
missholly Posted December 30, 2012 Report Share Posted December 30, 2012 id like to use the airbrush for all over coverage so i don't have to dip the pieces, and eventually some detail work. ill check out harbor freight. thanks! Link to comment Share on other sites More sharing options...
Harry Potter Posted December 31, 2012 Report Share Posted December 31, 2012 Hi folks, I was wondering if anyone could recommend a good spray gun. I have a general purpose one but it only has fan shaped spray. I use a siphon spray gun from axner (k-grip). Very easy to clean. Delivers good amount of glaze. I use a siphon feed air brush for smaller amounts of application. Both work great. Link to comment Share on other sites More sharing options...
clay lover Posted January 5, 2013 Report Share Posted January 5, 2013 Really happy here with a 5 gallon tank compressor from Northern Tool. I use several different guns, depending on what I'm doing. Link to comment Share on other sites More sharing options...
Marcia Selsor Posted January 6, 2013 Report Share Posted January 6, 2013 I just replaced my old compressor with a LPHV and I am very happy with the glaze applications. I have a Paasche airbrush compressor and airbrushes for detail work. Marcia Link to comment Share on other sites More sharing options...
Mark C. Posted January 6, 2013 Report Share Posted January 6, 2013 I just replaced my old compressor with a LPHV and I am very happy with the glaze applications. I have a Paasche airbrush compressor and airbrushes for detail work. Marcia These are the BEST for spraying glaze LPHV-I have one as well-they work well with finishes for wood as well. Mark Link to comment Share on other sites More sharing options...
docweathers Posted January 7, 2013 Report Share Posted January 7, 2013 I don't have a great deal of experience to compare gravity feed spray guns, but some time ago I bought a cheapie ($9.28 with shipping) on eBay. It seems well constructed and works pretty well. I just ordered two more so that I can switch glazes without cleaning the gun. The vendor's store is HitTime Store Link to comment Share on other sites More sharing options...
Airbrushfan Posted February 25, 2013 Report Share Posted February 25, 2013 I'd also pay some attention on the noise level of a compressor. The cheaper the louder... ^^ Link to comment Share on other sites More sharing options...
Marcia Selsor Posted February 25, 2013 Report Share Posted February 25, 2013 That was one reason I got rid of my old compressor. It was really noisy. This LPHV seems about as loud as a low vacuum cleaner. Not bad imo. Marcia Link to comment Share on other sites More sharing options...
cambriapottery Posted November 8, 2015 Report Share Posted November 8, 2015 detail stuff i'd recommend an airbrush. for large areas any decent sprayer should do the trick but usually gravity feed is preferred for spraying minerals/glaze through it. in our studio i've got a very cheap auto parts store siphon feed set that came with a large and small sprayer - seems to work pretty well actually and has been student-proof for several years, surprisingly. for an inexpensive sprayer that will spray almost any consistency material is the "critter" siphon feed sprayer - that thing is amazing! and will accept mason jars or small plastic mayo jars as the res.I need a spray gun or an airbrush. Usually I do a thin dip glaze on my work and then put some colour in specific areas on some objects that are rather small. My guess is that I need an air gun not a spray gun for this. I was looking at the Critter spray gun which looks like it works very well with spraying as it is much like the mouth aspirator in principle. However its description in application of glaze sounds like it might not work in my case (circular glaze pattern only). How do the airbrush fare in terms of cleaning? Do they clog up easily? Any working particularly well in this regards? thanks Joan Scott Link to comment Share on other sites More sharing options...
Mug Posted November 15, 2015 Report Share Posted November 15, 2015 Hi Joan Here are a few Airbrush basics Glazes are prety easy to clean from an airbrush. Pay extra cleaning attention when switching from things like oxides. Filter your glaze through a screen to keep the big stuff out. You will probably use medium to large tip in your airbrush. The one to buy depends on your local supply of parts. I would purchase a name brand airbrush. Iwata, Paasshe, Badger, Thayer and Chandler have been around for a long time. I use an Iwata eclipse and have a plethora of Passche air brushes. The Iwata gets the most use. It's more comfortable to me, sprays a variety of thicknesses and is easy to unclog. You can set up a Passche to work as well as the eclipse, but It's a little more finicky with a variety of thicknesses. On the cheap, singe action brushes are great for basic spraying. A double action cost more and gives you the ability to vary the spray pattern. A double action brush has more of a learning curve, but it's more versatile. The spray cups that hold your paint come in all sorts of shapes and sizes. The small ones on top or at the side are for quick color changes. The bottles that attach are for larger quantities. I use the bottles most of the time and have a small color cup that attaches when I will be swapping lots of color. Link to comment Share on other sites More sharing options...
MichaelP Posted November 16, 2015 Report Share Posted November 16, 2015 Mug, What model(s) of Iwata do you prefer? Here they are: http://www.amazon.com/s/ref=nb_sb_ss_i_1_5?url=search-alias%3Dtoys-and-games&field-keywords=iwata+airbrush&sprefix=iwata%2Ctoys-and-games%2C204 Thanks. Mike Link to comment Share on other sites More sharing options...
Mug Posted November 17, 2015 Report Share Posted November 17, 2015 The HP BCS uses the bottles, It's a work horse, you will find this bush in many a tool box. I use the createx bottle adapters The color cup I have plugs in the bottom, But the color cup is off to the side like the HP SBS. I'm not quite sure where I aquired the color cup, It could be a different brand, It's probably a Paasche part. The hole where you mount the bottles is pretty much universal, there may be a slight diameter difference. The angle of that hole is often different between manufactures, making it difficult to swap different brand bottles. The air brushes with the color cup on top are more of a specialized thing. They are great when mixing your own small amounts of color, china paints, Gouache, nail artist ect.. Link to comment Share on other sites More sharing options...
MichaelP Posted November 17, 2015 Report Share Posted November 17, 2015 Thanks Mug. Link to comment Share on other sites More sharing options...
Rex Johnson Posted November 23, 2015 Report Share Posted November 23, 2015 I use an HB and it works fine for anything from cups to large platters. 20 fl. oz. HVLP Gravity Feed Air Spray Gun Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.