Jump to content

Joseph Fireborn

Members
  • Content Count

    2,591
  • Joined

  • Last visited

About Joseph Fireborn

  • Rank
    Advanced Member
  • Birthday 08/12/1984

Profile Information

  • Gender
    Male

Recent Profile Visitors

18,704 profile views
  1. From my testing with SiC. I found that the best results required glazes with good melts. Shino is a stiffer glaze usually, at least all the shino's that I liked. Usually, the SiC just made it bubble and didn't produce any visible reduction that I could see. I was using a 1200 mesh SiC. However this doesn't mean it isn't possible, it just might take a lot of testing to get some results, so be prepared to go down a rabbit hole. If I was going to approach this again, I would use a currie grid for the shino recipe you wanted to try, then I would add a tiny amount of SiC to each cup and do another grid, and repeat this process 2-3 times. Then I would fire those tiles and look for any signs of reduction and try to figure out which combination of flux, clay, silica starts to get the best results. Then proceed from there. Anywho! Good luck and please post any positive results you get!
  2. Am I the only one who feels like we need pictures of the sink and toilet!
  3. Don't get any ideas, I don't want any roomies. Hello JBaymore. Hope all is well.
  4. At least it happened during a bisque. The absolute best time for it to happen.
  5. @liambesaw that pot you posted is stunning! I wouldn't change a thing!
  6. Family comes first. Sounds like a lot of good things heading your way.
  7. I just read this entire thread. Good to see that you sold all types of pots at all types of prices @shawnhar . I have posted my opinions on this before, but I believe that work should be priced higher as you gain skill and your craft improves until a point that your new gains in skill don't make enough of a difference to justify price changes without an increase in demand. If all of the sudden you make leaps and bounds again then prices should move up again if there is demand for the new skill gained aesthetically. My first mugs/yunomi were 20-25$, however, my new mugs/yunomi are $40-50. Selling my new work for the same price as my old work would be absolutely foolish as the work is more desired and takes more time. I also think that is a very important factor in pricing. If you can make pots quickly then you can afford to price them lower, but only if there is enough of a demand for them at that price. I started pottery in 2014, so this will be my 5th year anniversary coming up. This year is going to be the first time in my pottery journey that I am going to try to make pots and sell pots for profit long term. In the past, I have just made a spurt of pots as a progression milestone and sold them to see what the demand was like for that type of design/aesthetic. So far I have been successful with my aesthetic choices and progressions that have allowed me to continue raising prices. Another thing that I believe should be a factor in your work is how unique the type of work you make is. If no one else is doing similar things to what you are doing then again you can charge more for your work. There is a good reason that potters continue to advance their work and narrow down their aesthetic. It's that uniqueness that allows them to gain market demand and increase prices because of that demand until they can supply the right amount of pots for the right amount of buyers. In the end, I don't think pricing is that difficult, if you have enough eyes going over your pots for sale then you will quickly be able to raise and lower prices until you find a sweet spot that you are happy with physically. John Baymore always said something like: Sell 1000 pots for 1$, 10 for $100, or 1 for $1000. The choice is yours. The option is available to do any of those things, which choice you decide to do is totally up to you and how hard you work and the design choices that you make along the way.
  8. I would also add that wearing something that can break and slice your finger open is probably not a good idea. I don't wear rings anyways because of the danger they pose in everyday life much less one that could break apart and be razor sharp. I would have a really hard time selling something that could potentially hurt someone very badly. Just think about all the times you have smashed your finger or something now think about a super sharp ring also breaking and cutting into your finger.
  9. Sorry! I missed this. Yes, I still work with an electric kiln. I love my electric kiln. It is so wonderful! Took me a while to accept that, but once I did I was able to achieve a lot more than just wishing I had the ability to fire another type of firing. How are you?
  10. That moment you have been making jars with a gallery and also a lid inner gallery that are so perfect that when you wax them they no longer fit inside of each other... perfection. Then that moment where you realize you forgot to turn on a preheat for your greenware to fire in a glaze firing and remember at 540F before you have a terrible disaster in your kiln and you stop it and vacuum it the next day. Thank you Jesus. 

    1. Show previous comments  3 more
    2. Benzine

      Benzine

      Single firing, I take it? 

      I have neither the skill nor disposition to attempt that...  I have had some of my students, make that decision for me though.  Thus far, it has been on wares, that I didn't stack...

    3. Joseph Fireborn

      Joseph Fireborn

      Yes! I single-fire a good bit of work. Sometimes I bisque and sometimes I single fire it just depends. It would have been fine if I had turned on my preheat. Haha.

    4. Benzine

      Benzine

      I am OCD, on my kiln.  I will check the program numerous, times, check that the vent hood is on,  etc.  Because that one time that you don't...

  11. After a good nights rest, and a few hours of calming down (my school workload is intense). I still plan to sell work overseas. I will just make sure they are aware that they will probably face additional fees when picking up their package if their local government has duties or taxes. I just have to figure out if Etsy has a way to make that prominent for overseas customers. I don't think they do, but I will figure out something. I appreciate everyone's opinions and stuff, and I am sorry if I started a political sidetrack here. Just was mindboggling, but that's my own ignorance for living in my little pond here in the USA. Cheers!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.