Pres Posted December 11, 2022 Report Share Posted December 11, 2022 Since getting the new kiln, I have worried over using wax with the downdraft system. My thinking is of residue from wax building up in the downdraft components. I used to dip the bottoms of chalices, mugs and smalls of all sorts, but now everything is hand wiped or using the felt pad on the wheel. best, Pres Hulk 1 Quote Link to comment Share on other sites More sharing options...
Hulk Posted December 11, 2022 Report Share Posted December 11, 2022 "Anybody have a cold wax they can recommend that works well plus doesn't smell much when burning off?" Good question! I'm about out of what Aardvark Clay sells under their own label; it's an emulsion, and it does work ok. There's definitely a smell, but very little smoke. "Aftosa Green" is available at the supply place I can more easily drive to; any reports on that product? Any reviews on what U.S. Pigment offers? Quote Link to comment Share on other sites More sharing options...
Jeff Longtin Posted December 15, 2022 Report Share Posted December 15, 2022 On 12/10/2022 at 7:31 PM, Roberta12 said: I think I need a pic of @Jeff Longtin peanut butter lids as well. Here are plate tongs made from plastic jar covers. (For some reason the image is sideways?) The many holes prevent the lids from holding glaze which then drips onto your still wet plate. The little notches in the lid rim aid in holding the plate edge. Once the glaze is dry I dab a little glaze where the lids held the edge. Generally speaking it enables me to glaze plates without any drip marks. Really appreciated with translucent glazes. Chilly, Min, Roberta12 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Mark C. Posted December 15, 2022 Report Share Posted December 15, 2022 On 12/11/2022 at 9:50 AM, Hulk said: "Anybody have a cold wax they can recommend that works well plus doesn't smell much when burning off?" Good question! I'm about out of what Aardvark Clay sells under their own label; it's an emulsion, and it does work ok. There's definitely a smell, but very little smoke. "Aftosa Green" is available at the supply place I can more easily drive to; any reports on that product? Any reviews on what U.S. Pigment offers? I wrote a bunch on wax a few yaers ago. if do a search on wax. I have the good stuff still (hopefully for my duration) and just tested Forbes wax (our local shop sells it) for a friend and it was the second best-highwater clay online sells it. I am super picky on good wax. With good wax and a damp cut spoonge to apply it you can get that line you like without taping for sure Roberta12, Pres, Rae Reich and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Roberta12 Posted December 15, 2022 Report Share Posted December 15, 2022 3 hours ago, Jeff Longtin said: Here are plate tongs made from plastic jar covers. (For some reason the image is sideways?) The many holes prevent the lids from holding glaze which then drips onto your still wet plate. The little notches in the lid rim aid in holding the plate edge. Once the glaze is dry I dab a little glaze where the lids held the edge. Generally speaking it enables me to glaze plates without any drip marks. Really appreciated with translucent glazes. Clever, @Jeff Longtin thank you for the picture! Do those "tongs" work on larger/longer platters also?? Quote Link to comment Share on other sites More sharing options...
Roberta12 Posted December 15, 2022 Report Share Posted December 15, 2022 @Hulk Thanks for the picture. I misunderstood when you said a "sharp corner" I was thinking it was a "sharp corner" of tape. I have had this really challenging order that I have been working on. I needed a clean line on the foot. I usually use Forbes wax and since it was porcelain I put alumina oxide in the wax, but the glaze was a strong blue color and I wasn't happy with just wax. I did end up using frog tape, and I did get a clean line. Outside of the bowl was the dark blue, interior was 2 glazes and a flux. So I was working to keep everything clean. I should post of picture of what I ended up doing. It made me laugh when I saw them all lined up. It actually worked for dipping. Rae Reich and Hulk 2 Quote Link to comment Share on other sites More sharing options...
Jeff Longtin Posted December 16, 2022 Report Share Posted December 16, 2022 21 hours ago, Roberta12 said: Do those "tongs" work on larger/longer platters also?? Years ago, on another pottery blog, Clayart, someone mention that English potteries use "tongs" that are essentially strips of wire, extending from several fingers, that hold plates along the edge. The idea that holding the plate, along the edge, creates fewer noticable glaze tong marks, seemed like a good idea, to me. However, crafting wire in such a way that it could hold a plate firmly seemed challenging. So this is my alternative solution. My original thought was to use cookie cutters, thin strips of steel in other words, but I couldn't find cookie cutters that were big enough to hold a plate. Looking around my living space I saw a jar cover and thought it might work. Turns out these work really well. I need to grab the plate firmly, before I dip, but otherwise they hold 12" plates nicely. Roberta12 and Hulk 2 Quote Link to comment Share on other sites More sharing options...
PeterH Posted December 16, 2022 Report Share Posted December 16, 2022 (edited) 7 hours ago, Jeff Longtin said: someone mention that English potteries use "tongs" that are essentially strips of wire, Lots of pix at https://tinyurl.com/2rkyb27z ... two particularly lo-tech ones are It would be interesting to know if "fingerdips" work Use a car dent puller to dip your pots in glaze! https://tinyurl.com/2p9y6bn3\\\\\\\\\\ Apparently suckers can be useful in some circumstances Edited December 16, 2022 by PeterH Jeff Longtin, Babs, kswan and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Rae Reich Posted December 16, 2022 Report Share Posted December 16, 2022 On 12/14/2022 at 5:32 PM, Jeff Longtin said: Here are plate tongs made from plastic jar covers. (For some reason the image is sideways?) The many holes prevent the lids from holding glaze which then drips onto your still wet plate. Parmesan jar lids have holes already! Jeff Longtin and Roberta12 2 Quote Link to comment Share on other sites More sharing options...
Roberta12 Posted December 16, 2022 Report Share Posted December 16, 2022 Use a car dent puller to dip your pots in glaze! https://tinyurl.com/2p9y6bn3\\\\\\\\\\ I bought a couple of dent pullers for that reason. It only works on waxed, very smooth, flat bottoms. If that describes your pots, it will probably work. Rae Reich, kswan and PeterH 3 Quote Link to comment Share on other sites More sharing options...
kswan Posted December 16, 2022 Report Share Posted December 16, 2022 I have a couple of those as well for dipping. I thought I could do it without waxing an area. Ha. The dent puller stuck nicely on the bottom of my unwaxed piece, but after dipping in the glaze, the dent puller detached and my bowl landed in the bottom of the glaze bucket. Of course, I tried it again to see if it was just a fluke and yes it did fall off. PeterH, Babs, Rae Reich and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted December 17, 2022 Report Share Posted December 17, 2022 I’ve seen @OldForgeCreations have some words about using dent pullers for this purpose. He’s stated that not all dent pullers are created equal, and that if you use a sub par one, they will detach. PeterH 1 Quote Link to comment Share on other sites More sharing options...
Min Posted December 17, 2022 Report Share Posted December 17, 2022 Lots of good suggestions for glazing tips in this thread. I'll start a new thread with another method using magnets here as it probably should be in the Studio Operations section. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.