Mark C.

If you are firing in the cone 10 range and these clay items are just sculpture then WSO is the most forgiving clay I have ever found.I feel Bmix with grog is not your best sculpture clay no matter what temp range-get a more loose body

Got a notice about this thru a few sources. Laguna has 2-3 other choices with Mahavir Feldspar being the go to Hard to say if this is permanent or will change again-if You like custar and need custar buy oit now while you can find it.-Last call

small forms like mugs and other with no feet are thrown on plaster bats and no leveling is needed as the clay pad is flat and so is the plaster bat. If the form is not lever we tap it level on a plater bat. Trimmed foot forms are do not need any adjustment ever . When I switch to larger forms not on plaster bats (over 8#s ) I use a wire to cut and trim the bottom foot. This all is second nature after a few decades in the business

(After thinking long and hard about what you have said and after reading through all my glaze books I think I just need to go gas, I can’t help myself.) Welcome to my world

No permit and easy for gas then I suggest gas but I am a cone 10 gas potter myself so I am a bit bias. Learning with gas and cone 10 is a big learning curve but very doable.

I love the L&Ls -not to famailar with Canadian cone arts to much. LL has the great element holders and has well thought out details like cooler held off controls. Just a note about cone 10 in an electric-if thats the goal (cone 1 firings) then spring for the high cost elements or plan on replacing them a lot even with the high price ones they wear fast at cone 1O. Also consider the S thermocouples for better life . Neil here has the most experience with them and I'm sure will advise.-He is also a distributor in the east.

kyanite is something I use in my home made ITC mix and comes in many mesh sizes. Does not shrink The crystals are long and its one of the strengtening things say in mulite kiln shelves It great stuff

My hoarding has paid off in spades so far. Out of Kingman feldspar after burning thru 3,000#s in 40 years now I'm using custar instead but have 1,000#s

Custar is back now Dick at least from Laguna locations

I bet they made some small hobby doll kilns and the like in the UK that ran on 120 like they did here

This is several solutions all in one from Jeff who I had the pleasure of meeting a few weeks ago. Dealing direct with the manufacture on seconds or even a pile of used ones is really a lead worth exploring . I know of several huge piles of them in my area from tow sources as most potters are long gone and the hoarders (I only have a small pile) do not know how to get rid of them here now. Rent a heavy duty truck and go pick them up in MO or have them trucked to you from the factory. I have moved more hard brick in my life than I will ever need. I built several kilns with them ,my salt being the last.

I could have mailed those 4 #3 bricks to you from my hoarder fire brick pile.

If this is in the UK? then we need to know more on what the electrical voltage is in the UK. Maybe some UK potters can chine in with this tec info

I have seen lots of hard brick over the years on many sites from potters web to craigslist and others-search a thread here thats old on ceramic sites for sales ( not facebook marketplace) They make the bricks in the east where you live by the way.

also old mills that used bricks in say kiln drying or boilers can be a source.