-
Posts
2,543 -
Joined
-
Last visited
Profile Information
-
Location
Silver Spring, MD
-
Interests
biking, jogging, cooking and eating, veggie gardening, baseball (Orioles)
Recent Profile Visitors
201,354 profile views
GEP's Achievements
Advanced Member (3/3)
2.7k
Reputation
-
GEP reacted to a post in a topic: Microwave Safe
-
GEP reacted to a post in a topic: QotW: Have you had to reformulate any clays or glazes due to a shortage of materials?
-
Roberta12 reacted to a post in a topic: QotW: Have you had to reformulate any clays or glazes due to a shortage of materials?
-
Rae Reich reacted to a post in a topic: QotW: Have you had to reformulate any clays or glazes due to a shortage of materials?
-
Pres reacted to a post in a topic: QotW: Have you had to reformulate any clays or glazes due to a shortage of materials?
-
Hulk reacted to a post in a topic: QotW: Have you had to reformulate any clays or glazes due to a shortage of materials?
-
I have been spending a lot of time and energy replacing my Gerstley Borate glazes. The new ones are coming along, but they just don’t have the same glow and magic. I am trying to push the limits of “how much boron can I get away with?” The good news is that switching to Fabi Talc in place of Texas Talc has been seamless.
-
GEP reacted to a post in a topic: Are exhibitions or juried art shows worth entering?
-
GEP reacted to a post in a topic: Are exhibitions or juried art shows worth entering?
-
GEP reacted to a post in a topic: Are exhibitions or juried art shows worth entering?
-
GEP reacted to a post in a topic: Are exhibitions or juried art shows worth entering?
-
GEP reacted to a post in a topic: Are exhibitions or juried art shows worth entering?
-
GEP reacted to a post in a topic: Kemper Tools sold New Owner new Location in future .
-
GEP reacted to a post in a topic: What’s on your workbench?
-
Bill Kielb reacted to a post in a topic: Still confused about first firing in new L&L kiln
-
neilestrick reacted to a post in a topic: Still confused about first firing in new L&L kiln
-
Roberta12 reacted to a post in a topic: Still confused about first firing in new L&L kiln
-
Still confused about first firing in new L&L kiln
GEP replied to Girl on Fire's topic in Studio Operations and Making Work
In my experience, self-supporting cones can stick to the shelf if you overfire them just a little. They’re not supposed to, but it happens! As @Bill Kielb said, if you kiln wash your shelves, this is not a problem. I do not kiln wash my shelves, so I have had to chisel off some stuck cone bits. My solution to this is to use cone plaques, the kind that have holes in one side for holding non-self-supporting cones at the correct angle. I use the underside that doesn’t have holes, put kiln wash on that surface, and place my self-supporting cones on them. Any small piece of old or broken kiln furniture will work too. -
Frank Hott started following GEP
-
GEP reacted to a post in a topic: Interesting Cooling Cycle Info
-
Will soy wax work for resist on bottoms?
GEP replied to Snickerhaus Studio's topic in Studio Operations and Making Work
Another soy wax user here. I much prefer it to paraffin. Not only does it smell less, it melts to a more liquid consistency, therefore makes a straighter line on your pot. When you dip a pot into melted paraffin, the top edge of the paraffin can be wobbly and uneven, because it starts to solidify against your pot too fast. Note that it’s possible to by the wrong type of soy wax. There are some soy wax pellets that are formulated to stay soft when cool. Those do not resist glaze very well. Make sure to use soy wax FLAKES (looks like you have the right kind, @Snickerhaus Studio), and that the flakes are shiny and hard at room temperature. -
Roberta12 reacted to a post in a topic: QOTW What other creative things are you involved with?
-
Rae Reich reacted to a post in a topic: studio glazes
-
akilpots reacted to a post in a topic: studio glazes
-
For most of the 20+ years I’ve had my basement studio, I’ve been using the same 3 base recipes. A dry matte, a semi-matte, and a glossy base. I have 1 variation on the dry matte, 2 variations of the semi-matte, and 2 variations of the glossy. Which equals 5 total. Which means I totally agree with your goal to keep 5 glazes. I also agree with @Marilyn T that having fewer glazes is beneficial to you, in terms of artistic growth.
-
What style of pottery sells best?
GEP replied to Bam2015's topic in Business, Marketing, and Accounting
Agree that everyday functional pottery sells much better than sculptural or decorative ceramics. But “functional” alone will not automatically sell, there are plenty of functional wares out there that don’t sell well. It also needs to be pleasing to touch and hold it. And it needs to be correctly priced. Not too high OR too low. And it helps a great deal if it is stylistically original, i.e. customer does not look at it and think “I see a lot of pottery that looks just like this.” -
Based on simply looking at your photo (which is not very scientific), the glaze appears to have been applied too thickly to me. Over thick application is a common cause of pinholes. Perhaps the thing that has changed recently is the amount of water you are using? Do you measure for specific gravity? Another common cause of pinholes is underfiring. Sometimes a 5 degree higher firing can solve a pinholing problem. Perhaps the real issue is that your elements or thermocouples need to be replaced, and therefore your kiln is slightly underfiring? A firing with witness cones can answer this question.
-
Stull Charts, Flux Ratios, Silica:Alumina Ratios - Open Discussion
GEP replied to Min's topic in Clay and Glaze Chemistry
Yes. And if possible, let someone put them through a dishwasher 5x/week for 10 years! No formula can give you more information than that. -
Stull Charts, Flux Ratios, Silica:Alumina Ratios - Open Discussion
GEP replied to Min's topic in Clay and Glaze Chemistry
My “for what it’s worth” contribution to this discussion: The glaze I use the most is based on a MC6G semi-matte base, which I altered with talc and calcium carb to make it more matte. At one point, I calculated out the unity formula, and it was well outside of the range that MC6G recommends. But I’ve been using it for going on 20 years, and it has been rock solid. Even in cases where a customer brought back some 10+ year old bowls, where the glossy liner glaze was visibly losing its shine. These customers are heavy dishwasher users, and again these pots had been in almost daily use for 10+ years, but the matte glaze on the outside was exactly like day 1. Unity formulas, flux ratios, boron charts are all useful guidelines, but glaze chemistry has far more variables than us mere humans can test. No substitute for first hand experience. “Melt and see” is still an indispensable mindset. -
Would love to hear how it did in your test!
-
I am currently searching for a new cone 6 glossy base, and came across this very simple recipe. 50 Frit 3134 30 EPK 20 Silica I am attracted to how simple it is. But is it too simple? I know that some Frits are considered almost complete glazes on their own. I need a glaze that will withstand daily use and dishwashers. Has anyone here tried a recipe like this, or have any other thoughts about something this simple?
-
Custer feldspar... again... new chemistry 2021 data
GEP replied to Dick White's topic in Clay and Glaze Chemistry
I spoke to my local supplier, they did not have any info about the ingredients used to make Cornwall Stone, and they said availability seems good. They suggested I check with Laguna, so I gave them a call. The tech I spoke to said that their Cornwall Stone blend does not use Custer Feldspar. He declined to tell me which feldspar was used (it is 65% of the total) but assured me that it was not going out of production anytime soon. So it seems that Cornwall Stone Laguna Blend is plentiful, and can be a reasonable substitute for Custer Feldspar. More good news from my local supplier... all the Ferro Frits are plentiful again. That was not the case during the pandemic. -
Custer feldspar... again... new chemistry 2021 data
GEP replied to Dick White's topic in Clay and Glaze Chemistry
These are awesome @Min! Thank you so much!! And thank you @Mark C. for the breakdown of Laguna Cornwall. Well, at least in my studio, I’m gonna call it Fabio Talc from now on :-) -
Custer feldspar... again... new chemistry 2021 data
GEP replied to Dick White's topic in Clay and Glaze Chemistry
The listing on my supplier’s website is “Cornwall Stone - Laguna Blend” so I’m pretty sure it is the Laguna product. I will email them tomorrow (need to ask them some other questions anyways) and confirm where it’s from. THANK YOU for the adjusted recipe!! -
Custer feldspar... again... new chemistry 2021 data
GEP replied to Dick White's topic in Clay and Glaze Chemistry
I’m trying to make a white glaze, so you’re right that an exact color response is not that important to me. My supplier is only offering Minspar and Plastic Vitrox Clay, as far as feldspars go. Plus the Cornwall, which they do not classify as a feldspar exactly. My needs are to find a reliable recipe that I can make in large quantities on a regular basis, so buying 50lb sacks online and shipped to me is not feasible. I need to work with what my local supplier has. I like the idea of subbing Cornwall, but upping the Frit to boost the melting.