Pres Posted August 1, 2022 Report Share Posted August 1, 2022 Hi folks, nothing new in the QotW pool so I will pose another question. Lately there have been questions about folks dealing with arthritis as do I. This has led me to wonder if people that throw use some aids in their throwing because of physical difficulties, arthritis or otherwise. We have all seen those centering jigs with the board on a lever to aid in centering clay. I have seen someone center using a wrist brace similar to what I use for bowling when centering. I am sure others have work arounds when throwing that I don't know of. Some people may scoff at these saying they are crutches to get something done that some one should learn to do without them. . .I was once in that school, but now I wonder?? QotW: Do you use or ever used a throwing aid of any sort due to a physical weakness/ailment? best, Pres Quote Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted August 1, 2022 Report Share Posted August 1, 2022 I hate that a mobility aid would be considered a pejorative for anyone who needs them. It’s not stupid if it works. Ugh. I have seen people make devices for opening clay once it’s centred. The person I saw with it was more concerned with getting an even bottom than with saving wear and tear on fingers, but it would be an excellent arthritis aid. They take 1.25” or thinner pvc pipe parts, and make a square M shape. All descending parts are capped, and the potter holds the 2 outside pieces and drags the device towards themself themsef. so they can be dragged from the centre of the clay ball towards the potter. The descending piece in the middle is shorter than the two side pieces, and the difference in height winds up being the thickness of the bottom of the pot. If you didn't cement the pieces together, you could probably make it very adjustable. kswan 1 Quote Link to comment Share on other sites More sharing options...
Pres Posted August 1, 2022 Author Report Share Posted August 1, 2022 @Callie Beller Diesel I think I've seen a utube video of this a few years back. Made sense to me, especially for some larger forms where one is using the fist to open up. I have found the fist to work well for me with a follow up of a few compression runs on the bottom to even it up. If I were throwing a ton of storage jars, it may make all of the difference. best, Pres Quote Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted August 1, 2022 Report Share Posted August 1, 2022 I thought it had good possibility for plates and platters too. Pres 1 Quote Link to comment Share on other sites More sharing options...
Denice Posted August 2, 2022 Report Share Posted August 2, 2022 I have used a throwing stick to throw tall slender jars. I have these huge hands that struggle with that type of jar. I have to buy men's gloves and sometimes shoes if I am desperate, most men have smaller hands than me including my husband. Denice Pres 1 Quote Link to comment Share on other sites More sharing options...
Bam2015 Posted August 2, 2022 Report Share Posted August 2, 2022 Callie, I am trying to picture the device that you mentioned, but I can't, and now I am curious. Would love to see a pic or see the video that you mentioned Pres. Betty Quote Link to comment Share on other sites More sharing options...
Pres Posted August 2, 2022 Author Report Share Posted August 2, 2022 Denise, I use throwing sticks often for chalice bowls and the stems. As to the opening tool @Bam2015, you will find the video here: https://video.search.yahoo.com/search/video?fr=mcafee&ei=UTF-8&p=clay+opening+tools&type=E214US714G0#id=2&vid=7aadabeead3955026ce8618b0ce04609&action=click best, Pres kswan, LeeU, PeterH and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Bam2015 Posted August 2, 2022 Report Share Posted August 2, 2022 Thank you Pres, how interesting. Wonder how he came up with that idea. Betty Quote Link to comment Share on other sites More sharing options...
Pres Posted August 2, 2022 Author Report Share Posted August 2, 2022 Necessity is often the mother of invention, but then there may be some obscure reference in a book or other resource somewhere of something made of bamboo, wood or other material. Who knows! best, Pres Quote Link to comment Share on other sites More sharing options...
oldlady Posted August 3, 2022 Report Share Posted August 3, 2022 (edited) i decided years ago to become the top part of a jigger and jolly "machine". i like making bowls and a friend made me a stack of 6 sizes of walnut discs after watching me use a half inch thick plastic disc to make a bowl. an expert in using a lathe, he used a block of walnut and thinned the edges of each of the 6 sizes of rib to be perfect for the purpose. the technique is to open and shape a flowerpot with a thick bottom. when it becomes about 3 or so inches high, i insert one of the smaller discs, usually the 5 inch one, absolutely straight down in the center of the spinning pot. the disc forces the clay into a perfectly round interior, pushing down the walls and thickening the wall area close to the wheelhead. i push it down until i am sure it is just thick enough in the center to become the floor of the foot ring. pulling up the walls is then fairly easy, the clay has been made more plastic than it was when i started and travels up the outside of the bowl neatly. any throwing rings are on the outside and can be removed with a thin stainless rib. a final downward push corrects any tiny wobble and the pot is not only finished but almost dry. the only trimming is the foot ring itself and that is fun for me. that smooth outside allows me to almost immediately apply colored slip to be carved into my favorite designs. why waste time on throwing and permanently bending my old fingers when the fun is in the decorating? Edited August 3, 2022 by oldlady clarification Pres 1 Quote Link to comment Share on other sites More sharing options...
Pres Posted August 3, 2022 Author Report Share Posted August 3, 2022 Seems like my spoon does much the same, but reversing the spoon gives me a wide flat dish,, whereas the other direction gives me a deeper rounder bowl form. best, Pres Quote Link to comment Share on other sites More sharing options...
Babs Posted August 3, 2022 Report Share Posted August 3, 2022 On 8/2/2022 at 3:38 AM, Callie Beller Diesel said: I hate that a mobility aid would be considered a pejorative for anyone who needs them. It’s not stupid if it works. Ugh. I have seen people make devices for opening clay once it’s centred. The person I saw with it was more concerned with getting an even bottom than with saving wear and tear on fingers, but it would be an excellent arthritis aid. They take 1.25” or thinner pvc pipe parts, and make a square M shape. All descending parts are capped, and the potter holds the 2 outside pieces and drags the device towards themself themsef. so they can be dragged from the centre of the clay ball towards the potter. The descending piece in the middle is shorter than the two side pieces, and the difference in height winds up being the thickness of the bottom of the pot. If you didn't cement the pieces together, you could probably make it very adjustable. I made one and it really takes the pressure out of old joints. I use it for pasta ishes Ir medium salad dishes. Some bigger platters, I need the wheel head and I use the heel of my hand so ok so far with those joints. Callie Beller Diesel 1 Quote Link to comment Share on other sites More sharing options...
Pres Posted August 3, 2022 Author Report Share Posted August 3, 2022 @Babs, I used to used to use the heel of my hand to flatten large platters and patens, but now I use a rib. I have three ribs that are about 8'' long maybe 2-3" wide. Each has a slightly different shallow curve. I flatten a 5-7 lb ball of clay with my fist and arm as a rib, then use the wooden ribs held at a 30-45 degree angle to flatten and compress the slab more. These ribs have taken a major amount of stress off of me when compressing large pieces. I have even used them inside of large bird baths and succulent planters. best, Pres Babs 1 Quote Link to comment Share on other sites More sharing options...
JohnnyK Posted August 3, 2022 Report Share Posted August 3, 2022 While it doesn't deal directly with or in the clay, I, and many others here, use a crockpot to keep throwing water warm in the colder days of winter... Babs, Callie Beller Diesel and Pres 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.