Babs Posted April 17, 2023 Report Share Posted April 17, 2023 I recently held a class quite a distance from my property. The attendees made a variety of pots, bowls, plates. My question is When will the clay be at its best stage to transport. Initially I ws thinking leave till dry but today I was wondering if hard side of leatherhard would be better, my gut feeling. Wrap in newspaper? Bubblewrap? Thanks Babs Quote Link to comment Share on other sites More sharing options...
Roberta12 Posted April 17, 2023 Report Share Posted April 17, 2023 In the past, I have placed everything on wareboards, still in the leatherhard stage, and transported that way. I have a Subaru outback, I was able to lay the seats down and accomodate all the wareboards. I have also transported in low tubs with lids, placed some old towels and rags between things just to keep them from knocking together. That way I could stack the tubs and get more in the car. I prefer transporting things in leatherhard stage, rather than dry. A bit more resilient, I guess. I have a bumpy rural roads for part of my journey. Good luck! Min, Rae Reich, Babs and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Kelly in AK Posted April 17, 2023 Report Share Posted April 17, 2023 I transport greenware regularly, usually bone dry. No doubt it would be less fragile leather hard. I use copious amounts of bubble wrap. Rae Reich 1 Quote Link to comment Share on other sites More sharing options...
Rae Reich Posted April 17, 2023 Report Share Posted April 17, 2023 Attachments that aren’t stuck on tight are goin to fall off anyway, with vibration. I prefer leather-hard so they don’t dent but can be repaired if a handle falls off Roberta12 and Babs 2 Quote Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted April 18, 2023 Report Share Posted April 18, 2023 The type of padding is less important than whether or not anything can shake against anything else, or if there’s any load bearing considerations. Dry or even firm leather hard ware is still going to be extra vulnerable to vibrations caused by going over even small bumps like utility covers. Don’t let pieces rattle against anything. If you stack things like bowl, make extra sure that the item on the bottom of the stack can withstand the weight of the items above it, and that the uppermost items aren’t being supported on the rim of the item below. Try to line up foot rings on top of each other. Roberta12, Rae Reich and Kelly in AK 3 Quote Link to comment Share on other sites More sharing options...
Mark C. Posted April 18, 2023 Report Share Posted April 18, 2023 I have greenware tyransported every two weeks. to my studio for 20 years. I have also done it alot myself. The trick is to flip the pot if needed so the heavest side is down.Put on ware boards or bats whatever size you have, squares are more efficiient space wise The professional tip is covering it with towels. I use beach or wash towels. That steadies it and keeps it from moving. . This will make all the differeance gently cover and gently remove towels Rae Reich, PeterH, Kelly in AK and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Babs Posted April 18, 2023 Author Report Share Posted April 18, 2023 I ended up using a variety of depths of plastic tubs with towels on the nottom, newspapwr between the pots, and towels on top. One tall one with an extended foot, think tree roots , had a plastic bucket lined with towels and supported by foam bits all to itself! All home, on their rims, on the shelves, a few touch up colour slips needed . Tomorrow.. Subaru back full, bucket strapped in to front passenger seat. Left fox terrier at home , too risky, eh! Callie Beller Diesel, Kelly in AK, Hulk and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.