Dani Posted March 12, 2017 Report Share Posted March 12, 2017 Looking for a white speckled glaze. What ingredient create the speckling? Link to comment Share on other sites More sharing options...
neilestrick Posted March 12, 2017 Report Share Posted March 12, 2017 You could try a granular manganese or iron, but they may bleed out and/or discolor the white. It would be easier to use a speckled clay body with any white glaze. Link to comment Share on other sites More sharing options...
rakukuku Posted March 12, 2017 Report Share Posted March 12, 2017 Maybe illumite? We have one speckled green glaze that uses it. Speckles are black. Link to comment Share on other sites More sharing options...
Min Posted March 12, 2017 Report Share Posted March 12, 2017 http://www.rabcospecks.com/shop/Glaze%20Crystals%20Store/ Specks and "crystals", I don't know anything about these but they look interesting. Link to comment Share on other sites More sharing options...
Joseph Fireborn Posted March 12, 2017 Report Share Posted March 12, 2017 http://www.rabcospecks.com/shop/Glaze%20Crystals%20Store/ Specks and "crystals", I don't know anything about these but they look interesting. Oh my goodness! I am so glad you linked this. I was looking for something like this! Woohoo! Link to comment Share on other sites More sharing options...
preeta Posted March 13, 2017 Report Share Posted March 13, 2017 dani what cone are you looking for? ^6 or higher? or lower? in my limited experience i have not really seen many speckled white ^6 glazes. i havent seen them in the studio, neither at ceramic shows. ^10 i have come across quite a range of them. in all sorts of white. cool whites. warm whites. not just at studios but also people selling gas fired ware. i agree with Neil. I really enjoy playing with speckled clay and then using slip and transparent glaze; and also two coats of white glaze. Link to comment Share on other sites More sharing options...
fergusonjeff Posted March 13, 2017 Report Share Posted March 13, 2017 I use a lot of Laguna Speckled Buff (#403 I think) at cone 6. The granular manganese gives great speckles through any glaze I have used. I got really nice speckled white using this clay and Van Gilder's waxy white glaze recipe. The glaze is usually clear/tan in a uncontrolled cooling, but is a nice speckled white using a controlled cool. Link to comment Share on other sites More sharing options...
Chilly Posted March 13, 2017 Report Share Posted March 13, 2017 http://www.rabcospecks.com/shop/Glaze%20Crystals%20Store/ Specks and "crystals", I don't know anything about these but they look interesting. I didn't see any cone/temperature guidance! A UK supplier lists similar, but does say for low firing only (or some were - can't remember, but do know the ones I wanted would not work at ^6). Link to comment Share on other sites More sharing options...
Joseph Fireborn Posted March 13, 2017 Report Share Posted March 13, 2017 http://www.rabcospecks.com/shop/Glaze%20Crystals%20Store/ Specks and "crystals", I don't know anything about these but they look interesting. I didn't see any cone/temperature guidance! A UK supplier lists similar, but does say for low firing only (or some were - can't remember, but do know the ones I wanted would not work at ^6). I contacted them about this. Waiting to hear back. So far pretty bad customer service. Link to comment Share on other sites More sharing options...
Dani Posted March 13, 2017 Author Report Share Posted March 13, 2017 One of the old commercial glazes I inherited was called Speckled Bone. Maybe the only way to get a speckled glaze is to buy a commercial one? Link to comment Share on other sites More sharing options...
flowerdry Posted March 16, 2017 Report Share Posted March 16, 2017 I have had some good results with bisquing some brillo pads, then sprinkling the fine powder over wet glaze. Shows up really nicely in white glaze and you can speckle heavily or lightly as it suits you. If the glaze dries too much before I can make the particles stick, I just mist the area with water. I suppose you could just mix the powder into the glaze and apply it that way. Link to comment Share on other sites More sharing options...
leopold Posted April 16, 2019 Report Share Posted April 16, 2019 On 3/13/2017 at 2:43 AM, neilestrick said: You could try a granular manganese or iron, but they may bleed out and/or discolor the white. It would be easier to use a speckled clay body with any white glaze. Do you mean to mix the granular manganese with the clay? Link to comment Share on other sites More sharing options...
neilestrick Posted April 16, 2019 Report Share Posted April 16, 2019 4 hours ago, leopold said: Do you mean to mix the granular manganese with the clay? Yes. Link to comment Share on other sites More sharing options...
leopold Posted April 16, 2019 Report Share Posted April 16, 2019 1 hour ago, neilestrick said: Yes. Is it possible to fire in oxidation? Link to comment Share on other sites More sharing options...
neilestrick Posted April 16, 2019 Report Share Posted April 16, 2019 19 minutes ago, leopold said: Is it possible to fire in oxidation? Yes, granular manganese is how clay manufacturers make speckled cone 6 oxidation bodies. Link to comment Share on other sites More sharing options...
CactusPots Posted April 16, 2019 Report Share Posted April 16, 2019 A good source for granular iron for this purpose is car repair shops that do brake jobs. They literally have buckets of brake drum lining grindings. A coffee can full is a lifetime supply; Link to comment Share on other sites More sharing options...
chiznar77 Posted January 27, 2020 Report Share Posted January 27, 2020 Making a colored glaze and sintering, then adding that to a base glaze will give you a lot more control https://www.oldforgecreations.co.uk/blog/glaze-sprinkles Link to comment Share on other sites More sharing options...
liambesaw Posted January 27, 2020 Report Share Posted January 27, 2020 1 hour ago, chiznar77 said: Making a colored glaze and sintering, then adding that to a base glaze will give you a lot more control https://www.oldforgecreations.co.uk/blog/glaze-sprinkles Looks like a really complicated way to get the same results as just sprinkling a second glaze on top of a base glaze. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.