Joseph Fireborn Posted February 26 Report Share Posted February 26 Hello. I haven't been in this thread part of these forums before. If this price check is against the rules then please just remove the post. I wasn't sure where else to ask it since I haven't been here in a while. I am probably going to be selling my Studio soon but the main 3 items are my kiln, wheel and slab roller. I wanted to make sure I knew the going rates so I can offer a fair price to myself and the potential buyers. L&L Easy18-3 with an upgraded digital controller. It has been gentle used with probably 500 firings, half of them being bisque. Although I don't know the true amount because I replaced the controller. The elements look pretty good and the last firing was 2 months ago and it went smooth as expected. Thomas Stuart Legend Pottery Wheel 1/3HP - Still in perfect working order. Shimpo Slab Roller 30x50, the table one. - I really appreciate any feedback regarding what I should start at for these machines. Quote Link to comment Share on other sites More sharing options...
Hulk Posted February 26 Report Share Posted February 26 Although the market for used pottery gear may have softened a bit, looks to still be very strong. My only suggestions would be a) peruse recent listings (new & used) - same as buyers would do - and price accordingly, and b) keep the wheel, if you've a place for it to wait Joseph Fireborn and Pres 2 Quote Link to comment Share on other sites More sharing options...
Joseph Fireborn Posted February 26 Author Report Share Posted February 26 2 minutes ago, Hulk said: Although the market for used pottery gear may have softened a bit, looks to still be very strong. My only suggestions would be a) peruse recent listings (new & used) - same as buyers would do - and price accordingly, and b) keep the wheel, if you've a place for it to wait Yea. I guess I will have to get on my wife's facebook and see what I can find out. Seems marketplace is the way to go. Quote Link to comment Share on other sites More sharing options...
Hulk Posted February 26 Report Share Posted February 26 Yep! See also Craigslist? ...widen your search to include metro areas within several hundred miles or more... Joseph Fireborn 1 Quote Link to comment Share on other sites More sharing options...
Denice Posted February 26 Report Share Posted February 26 Sorry you can't hang on to your equipment, if anything I would sell the slab roller. When my son was in his teens he wanted to play the drums, so we bought him a nice set. We knew other drummers and they said at one point he will quit playing but don't let him sell him drums. They said he would want to drum again someday, twenty three years later and he went back to the drums. Denice Joseph Fireborn 1 Quote Link to comment Share on other sites More sharing options...
Mark C. Posted February 26 Report Share Posted February 26 (edited) The wheels sell well-I would ask 1/3 off new as a starting point-quality wheels really went up in price so find out what anew one costs to start with The kiln well its all depends on condition-same deal-harder to sell than a both your other items due to size Slab roller is a easy sale as they are hard to find used-very hard really Edited February 29 by Mark C. Pres and Joseph Fireborn 2 Quote Link to comment Share on other sites More sharing options...
Joseph Fireborn Posted February 26 Author Report Share Posted February 26 Thanks for all the replies wonderful people. I appreciate it. Hulk 1 Quote Link to comment Share on other sites More sharing options...
Mark C. Posted February 29 Report Share Posted February 29 sorry to hear you are out of clay making Joseph Fireborn 1 Quote Link to comment Share on other sites More sharing options...
Joseph Fireborn Posted February 29 Author Report Share Posted February 29 12 minutes ago, Mark C. said: sorry to hear you are out of clay making Not sure I am out forever. I am just building 2 businesses and I have 3 kids, by the time I am done working I am pretty exhausted. I thought I will just keep this, but its been 3-4 years since I have touched it except a few times when I had a moment. I just figure I won't get to it for another 5 years maybe. I guess I could just move it to a corner and let it sit, but I worry about things locking up and control panels not being used for several years etc. Quote Link to comment Share on other sites More sharing options...
Mark C. Posted February 29 Report Share Posted February 29 I have had Brent wheels sit for a decade with zero issues on start up. Electrics same deal-I life ina mosit rainforest for winters but no summer humidity Joseph Fireborn 1 Quote Link to comment Share on other sites More sharing options...
Joseph Fireborn Posted February 29 Author Report Share Posted February 29 Good to know. I might just find a corner in my garage and neatly organize everything. Still haven't decided on what to do. I dislike selling things because I am not a haggler at all and that process annoys me greatly. Roberta12 and Hulk 2 Quote Link to comment Share on other sites More sharing options...
Roberta12 Posted March 1 Report Share Posted March 1 A corner might be good. Clay is such a therapeutic way to manage all sorts of stress, life events. As we have all witnessed the last 4 years, prices have gone up and up and up. If you decide to go back to clay, your cost outlay would not be as steep. I hope you can find a corner. As @Denice suggested, maybe the slab roller? If it takes up a lot of space? Your life is crazy busy right now, but it will change. We had 3 kids. We get it. Best of luck to you Joseph. Roberta Joseph Fireborn and Hulk 2 Quote Link to comment Share on other sites More sharing options...
Bam2015 Posted March 1 Report Share Posted March 1 Best of luck to you Joseph. I have enjoyed reading your posts. Hulk and Joseph Fireborn 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.