Skutt KS kiln overheating
Posted 09 November 2012 - 08:31 PM
I have a firing problem and I wonder if anyone can help me. I have a Skutt KS 1027-3 that is probably 15 yrs old. (I work in a school environment) It has a kiln sitter (LT-3 or LT-3K, I am not in the studio and can't remember!) During the last two bisque firings (I have not tried a glaze firing in this kiln recently) the kiln has overheated, going well beyond 05 - probably more into the 6 range! Bisque pieces are coming out well vitrified, we use a mid-range clay and the pieces have a sheen on the surface in spots. The kiln sitter bar melted and the kiln did not trip. The first time it happened, I made sure the sensing rod was moving freely and replaced the rests, using a coat of kiln wash just in case. I then fired the kiln with just posts, shelves and witness cones. During this firing the kiln performed fine. I then loaded up the next bisque load (kept it relatively light, we do have some heavier sculptures, but I kept it sparse-r), held my breath and fired again. Again, the kiln overfired, the bar had melted. Thank goodness for timers! The witness cones I put in (05 and 04) were black puddles on the shelves. This kiln had the elements replaced late last school year, top to bottom, but it doesn't seem that it would be an element issue. The kiln seems to be heating up just fine, it's the shutting off part that is the problem!
Thanks in advance for any ideas!
Posted 10 November 2012 - 08:41 AM
Does your sitter have a timer?
Kiln Repair Tech
Owner, Neil Estrick Gallery, LLC
Posted 10 November 2012 - 09:41 PM
Do not allow anything to touch any part of the mechanism; and don't allow your pyrometric cones to be too close to the Sitter as well.
Finally check the pyrometric cone numbers to be sure they are correct. If you need to, get a magnifying glass to help you read the numbers.
"For God so loved the world that He gave His only begotten Son, that whosoever believeth in Him should not perish but have everlasting life".
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users