renenderend Posted November 12, 2013 Report Share Posted November 12, 2013 In my co op, we fired one of the students bowls over the weekend and when it was brought out of the kiln it looked like it had this sandy bubble coming out of it with the clay from the outside cracking all around it.My teacher said she had never seen anything like this in the fifteen years shes been teaching art.we know it couldn't have been a wet center or some foreign product like plaster stuck inside the clay, because that would usually crack or shatter.I also included a photo of what it looked like when the student cleaned off the sandy bubbles and cracked clay, It was hollow underneath the outside layer of clay.Also, the brown parts of it felt like a very soft sand. So if you have any idea of what it could have been, we'd really appreciate knowing what happened so we can avoid it happening with more important projects Link to comment Share on other sites More sharing options...
Mark C. Posted November 12, 2013 Report Share Posted November 12, 2013 Something foreign burned out of the clay that no one knew about-it was not plaster if you have some of that same clay cut it in small pieces with a wire looking for other stuff in it No telling what it was? What clay was this? and what temp was it fired to? Mark Link to comment Share on other sites More sharing options...
Marcia Selsor Posted November 12, 2013 Report Share Posted November 12, 2013 It almost looks like portland cement got in there. Check with the maker to see where they had the clay. Hopefully the class source isn''t contaminated. Marcia Link to comment Share on other sites More sharing options...
TJR Posted November 12, 2013 Report Share Posted November 12, 2013 Could be a throwing sponge or a chamois. Do you guys say chamois? Weird word. TJR. Link to comment Share on other sites More sharing options...
phill Posted November 13, 2013 Report Share Posted November 13, 2013 It could also be a low-fire clay accidentally mixed into a high-fire clay, which then bubbled out because it turned into a "glaze." Link to comment Share on other sites More sharing options...
annekat Posted November 14, 2013 Report Share Posted November 14, 2013 Could the piece have been made of recycled clay? All group studios I've worked in have had recycle bins which were available to everyone. It was fairly common for foreign objects or stuff to get in there. Even in my own recycled clay, I occasionally find a chamois or a clay bag closure wire. TJR, I say "shammy". Doesn't matter anyway, because I work alone. But when teaching, I informed students of the correct French pronunciation and the fact that it means "goat" or "goat skin", I think, but that it is OK to say "shammy" because that is what everyone says. Anyone may correct me on the literal meaning of the word. I took a lot of French in school but it was 45 years ago. Link to comment Share on other sites More sharing options...
Marcia Selsor Posted November 14, 2013 Report Share Posted November 14, 2013 I think Chamois are actually a mountain goat found in the Peaks of Europe in Spain and probably other places in Europe like the Pyrenees. I say "shammy" too. And I use them. If that accident was from a high fire , it could be some low fire clay as previously mentioned. Somebody in the shop should solve this before there are many more catastrophes. Marcia Link to comment Share on other sites More sharing options...
timbo_heff Posted November 14, 2013 Report Share Posted November 14, 2013 I believe the correct pronunciation is Sham-wow .(; Link to comment Share on other sites More sharing options...
Benzine Posted November 14, 2013 Report Share Posted November 14, 2013 It's only pronounced "Sham-Wow" if you are using it to soak up two liters of cola from a carpet. Link to comment Share on other sites More sharing options...
Babs Posted November 15, 2013 Report Share Posted November 15, 2013 Primarily used for, soft linings for shoes and clothes, cleaning windows and glass till potters grabbed it. Certainly from the Chamois, could even be a french canadian word!! Link to comment Share on other sites More sharing options...
bciskepottery Posted November 15, 2013 Report Share Posted November 15, 2013 It's only pronounced "Sham-Wow" if you are using it to soak up two liters of cola from a carpet. Or from the bottom of your pot if you throw using way too much water. Link to comment Share on other sites More sharing options...
Benzine Posted November 16, 2013 Report Share Posted November 16, 2013 It's only pronounced "Sham-Wow" if you are using it to soak up two liters of cola from a carpet. Or from the bottom of your pot if you throw using way too much water. You gotta be careful with that though. The Sham-Wow is so absorbant, that if you leave it in there too long, it will suck all the moisture out of the clay. Heck, I guarantee that you can bisque a ceramic object at room temperature, just by wrapping it with a Sham-Wow. It will even suck out the chemically bonded water! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.