Ben xyz Posted October 17, 2022 Report Share Posted October 17, 2022 I have been using the hand held frother method for a little while now (start with small whisk and finish w/ battery operated frother - haven’t needed to incorporate an unwieldy drill). I have been working with lava glaze tests, but now wondering if the nature of the glazes changes with the introduction of more oxygen when whipping the mixture. Just a thought - any idea? Thanks! Quote Link to comment Share on other sites More sharing options...
Min Posted October 18, 2022 Report Share Posted October 18, 2022 That's an interesting question. My hunch would be it wouldn't change anything but it would be simple to do two side by side tests, one frothed one not. Rae Reich 1 Quote Link to comment Share on other sites More sharing options...
High Bridge Pottery Posted October 18, 2022 Report Share Posted October 18, 2022 I always find it amusing that ceramics is 40-50% Oxygen. Adding more bubbles physically to your glaze shouldn't change how many bubbles your lava glaze makes. The Silicon Carbide forms Silicon Dioxide and Carbon Dioxide in the glaze and like a fizzy drink you get bubbles. Now I am thinking what could you add to give it more fizz, maybe something like Antimony Trioxide or another oxidising agent. Babs 1 Quote Link to comment Share on other sites More sharing options...
Min Posted October 18, 2022 Report Share Posted October 18, 2022 I was wondering about the consistency of the frothed glaze and how it might change the application. Rae Reich and PeterH 2 Quote Link to comment Share on other sites More sharing options...
PeterH Posted October 18, 2022 Report Share Posted October 18, 2022 (edited) 1 hour ago, Min said: I was wondering about the consistency of the frothed glaze and how it might change the application. I suppose that it's just possible that some form of froth flotation is occurring, separating out some particles from the mix. It's certainly a technique widely used in mining/ore-extraction.https://en.wikipedia.org/wiki/Froth_flotation A hint that silicon carbide might be a candidate for this sort of extraction from silicon/silicates. Edited October 18, 2022 by PeterH Ben xyz 1 Quote Link to comment Share on other sites More sharing options...
LostClay Posted October 18, 2022 Report Share Posted October 18, 2022 My son has frothed a glaze and rolled a cup in to the froth. I'm not sure what glaze he used, I only think he played with it a few times, but I don't think he found what he was looking for. You might need a bit more power than a milk frother depending on what your looking for. Ben xyz 1 Quote Link to comment Share on other sites More sharing options...
Ben xyz Posted October 18, 2022 Author Report Share Posted October 18, 2022 (edited) 4 hours ago, High Bridge Pottery said: Adding more bubbles physically to your glaze shouldn't change how many bubbles your lava glaze makes. The Silicon Carbide forms Silicon Dioxide and Carbon Dioxide in the glaze and like a fizzy drink you get bubbles. Now I am thinking what could you add to give it more fizz, maybe something like Antimony Trioxide or another oxidising agent. Obviously asking the right people! Having just completed my glazing classes (with a brief interruption with Covid), had discovered the rabbit hole that I will likely step back from for a bit. Def taps into that chemistry kit I had enjoyed as a kid. Am glad I brought up an interesting topic to consider. Edited October 18, 2022 by Ben xyz Trying to get rid of annoying black bars after quoting. Rae Reich and High Bridge Pottery 2 Quote Link to comment Share on other sites More sharing options...
Ben xyz Posted October 18, 2022 Author Report Share Posted October 18, 2022 Not sure why my type has black bars. Sorry ‘bout that. Quote Link to comment Share on other sites More sharing options...
Rae Reich Posted October 20, 2022 Report Share Posted October 20, 2022 On 10/18/2022 at 2:14 PM, Ben xyz said: Not sure why my type has black bars. Sorry ‘bout that. Not seeing any bars. Your lava glazes are beautiful! Super frothy!! Ben xyz 1 Quote Link to comment Share on other sites More sharing options...
Ben xyz Posted October 20, 2022 Author Report Share Posted October 20, 2022 Thanks Rae! Time to figure out what to apply those crazy glazes on… The outlined type must just be a glitch on my end. This is what it looks like on my phone (see below) - very weird. Something likely need to be updated (but that’s for another forum to figure out). Cheers! Quote Link to comment Share on other sites More sharing options...
PeterH Posted October 20, 2022 Report Share Posted October 20, 2022 1 hour ago, Ben xyz said: The outlined type must just be a glitch on my end. I see some of your text as white letters on a black background, so it's not just you. an also generate this sort of text Ben xyz 1 Quote Link to comment Share on other sites More sharing options...
Babs Posted October 20, 2022 Report Share Posted October 20, 2022 I have a glaze which likes to form bubbles when stirred and unless I spray hairspray to dispel them, or fettle them, they will affect the surface of the glaze but not going to the internal frothing of a lava glaze Ben xyz 1 Quote Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted October 21, 2022 Report Share Posted October 21, 2022 Joe at Old Forge Creations also noted that how well mixed a glaze is can affect how a glaze turned out in his blog post here. For those who just want the tl:dr, he compared a glaze that was only sieved but not mixed with ones that were sieved and mixed with devices of varying speeds. The results were quite pronounced. I don’t think the introduction of oxygen had influence over the results as much as making sure that all the glaze materials were very thoroughly distributed amongst each other. His example was a chrome-tin pink, so when you’ve got an ingredient that is only present in such a tiny amount, how well-mixed a glaze is will affect outcome. Magnolia Mud Research, Babs and Rae Reich 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.