cambriapottery Posted February 8, 2017 Report Share Posted February 8, 2017 Does anyone know a recipe for a slip to obtain texture such as Stephen King or Matt Long use in their work? Would simply adding sodium silicate to a very thick clay body slip work well? Link to comment Share on other sites More sharing options...
Marcia Selsor Posted February 8, 2017 Report Share Posted February 8, 2017 Add some vinegar to your slip and it thickens up. Marcia Link to comment Share on other sites More sharing options...
cambriapottery Posted February 8, 2017 Author Report Share Posted February 8, 2017 Thanks Maria. Does then retain brushed slip patterns in your experience? Link to comment Share on other sites More sharing options...
neilestrick Posted February 8, 2017 Report Share Posted February 8, 2017 I would deflocculate with sodium silicate. It will reduce the water content so you can apply it thickly without it cracking. Link to comment Share on other sites More sharing options...
cambriapottery Posted February 9, 2017 Author Report Share Posted February 9, 2017 Thanks Neil will try both Marcia and your suggestions. I want to retain the slip marks and compare the two results. This is a great resource wonderful to be able to dialogue with others. Link to comment Share on other sites More sharing options...
oldlady Posted February 9, 2017 Report Share Posted February 9, 2017 if you simplify your thinking, you might realize that the addition of what you call slip is merely the thickening of part of the wall of the pot. nothing sacred, special or scary about it, you are just adding some more clay that happens to be very wet. putting it into a pleasing shape will simply add a pleasing shape to the pot. whatever covering you choose later is the same as covering the original pot, just a little thicker some places. Link to comment Share on other sites More sharing options...
Marcia Selsor Posted February 9, 2017 Report Share Posted February 9, 2017 Thanks Maria. Does then retain brushed slip patterns in your experience?Yes it does. Marcia Link to comment Share on other sites More sharing options...
terrim8 Posted February 9, 2017 Report Share Posted February 9, 2017 Just tried this with two 50 ml samples of Alberta Slip. Added 1 tbsp of vinegar to one & 1 tbsp of sodium silicate to the other. That's a lot for just 50 ml samples but I wanted to see what would happen. The vinegar worked better to thicken up this slip. There must be a lot of calcium carbonate in Alberta Slip - it really fizzed, then thickened up nicely. I'll leave the samples to sit around for awhile to see if sodium silicate just takes more time to work. Link to comment Share on other sites More sharing options...
Guest Posted February 9, 2017 Report Share Posted February 9, 2017 Sometimes we just get lucky. I had made some slip from the clay I was using to try slip trailing. When it started to get smelly I added some vinegar. A couple of days later I went to check to see if it still smelled bad and noticed the slip was thicker. And here I thought I discovered something new... Link to comment Share on other sites More sharing options...
Dick White Posted February 9, 2017 Report Share Posted February 9, 2017 The result you got with the vinegar and sodium silicate is exactly what should be expected. The vinegar is a flocculant and will cause the glaze or slip to appear thicker, with a higher viscosity. The sodium silicate is a deflocculant and will cause the opposite, the glaze or slip will appear thinner, with a lower viscosity. However, the issue with slip is not that you are seeking a lower or higher viscosity, but that you are seeking a higher specific gravity. What you want with a trailing slip is not simply thicker slip, but more clay particles in the same volume of slip. Thus, the slip will not shrink as much when it dries. To achieve this, one must first deflocculate the slip, causing it to become thinner and almost too watery, and then add more dry clay to thicken it. If you try to just add more clay until you can't mix it anymore, you still won't have enough clay in the slip. Deflocculate it, and bingo, you now can put in a lot more dry clay and it will still flow (but not shrink as it dries). Link to comment Share on other sites More sharing options...
Min Posted February 9, 2017 Report Share Posted February 9, 2017 https://www.youtube.com/watch?v=3an-E0Lk8mQ edit: The only other thing is I would add is sieving it before using. I use a 60 mesh and instead of brushing it through I thump the sieve (with a batt on top as a lid) so it falls through the sieve, less air bubbles that way. It's hard to describe but if you overdo it with the flocs and deflocs going back and forth it can get so it kinda does a sagging slumpy thing down vertical walls on a pot and doesn't hold it's form as well. Link to comment Share on other sites More sharing options...
terrim8 Posted February 9, 2017 Report Share Posted February 9, 2017 So much for my plan to wait around for it to thicken ( the sodium silicate test)! Good video. Link to comment Share on other sites More sharing options...
Guest Posted February 9, 2017 Report Share Posted February 9, 2017 Thanks Link to comment Share on other sites More sharing options...
Saki Posted February 10, 2017 Report Share Posted February 10, 2017 I posted a similar question a while back and got a lot of good information: How To Create Thicken Slip For High-Relief Surface Decoration? I hope this helps. Link to comment Share on other sites More sharing options...
Guest Posted February 10, 2017 Report Share Posted February 10, 2017 If I recall correctly, I can use Soda Ash (Sodium Carbonate) to deflocculate the slip? Link to comment Share on other sites More sharing options...
Saki Posted February 10, 2017 Report Share Posted February 10, 2017 Or sodium silicate or darvan. Link to comment Share on other sites More sharing options...
Guest Posted February 10, 2017 Report Share Posted February 10, 2017 I already have soda ash where I would have to purchase sodium silicate or darvan Link to comment Share on other sites More sharing options...
Dick White Posted February 10, 2017 Report Share Posted February 10, 2017 Sodium silicate is also called water glass, was sometimes used to pickle eggs. However, you probably won't find it in a modern grocery. But because it's usage is common among potters, you should be able to find it at your preferred local pottery supplier. Same for the Darvan. Or consult the usual online suspects selling pottery materials. Link to comment Share on other sites More sharing options...
Guest Posted February 11, 2017 Report Share Posted February 11, 2017 Thanks Dick, the closest pottery supply place is a 2 hr drive each way (4 hour round trip). I plan on putting an order together and have it UPS'd to me once I need some other stuff. But in the meanwhile... Sodium silicate is also used as a cement floor sealer, I can buy a 5 gallon bucket of the stuff locally. I just need to figure out what to do with the other 4-3/4 gallons I think the price is around $220. Sodium silicate is also used to repair radiators and gaskets. Bar's Leaks Stop Leak or Head Gasket Repair might fit the bill but I think there's some type of fibers that might need to be strained out and there might be some copper in there as well. Link to comment Share on other sites More sharing options...
Dick White Posted February 11, 2017 Report Share Posted February 11, 2017 You can get the sodium silicate through Amazon and some other online sources, but the shipping costs are high (higher than I think they should be, but that's a different issue). The issue with sodium silicate in large quantities is that it does not keep well, it goes jelly and then hard. So a small pint or so is all I'd get, unless you are going to be doing a lot of slip casting and need it by the barrel. Darvan keeps better, but seems to be purely a pottery material. You'd have to order it from one of the pottery suppliers, and again you fight the shipping cost battle. For right now, you could achieve what you need to with some saturated soda ash solution. Fill a small jar with hot water and add the dry soda ash a bit at a time. Cap the jar and shake it until the soda ash has dissolved. Then add some more, rinse and repeat. Keep adding the soda ash until finally no more will dissolve when you shake it. There will be a few crystals remaining on the bottom of the jar that just won't go away. Now the solution is saturated with as much soda ash as it will support. Splash some of this into your gloppy slip mix and watch it go liquid. Then add more of your dried clay until it is too thick to stir. Finally add another splash of the soda ash solution to defloc the additional clay you just added. Link to comment Share on other sites More sharing options...
Guest Posted February 11, 2017 Report Share Posted February 11, 2017 Thanks Dick Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.