LeeU

If they were to see a wheelchair, do you think they would make accommodations? 
You are right that most of the time organizations just don't get it.  Even organizations specifically charged with providing services for the disabled have procedures that make no sense. 
I hope in your case that the organization puts the subject of disability accommodations on the agenda. I think the fact that the NHIA has a rule the Potter's Guild could copy is important. Drafting new rules can seem scary for people not used to doing it, but adapting existing rules requires way less effort.
If I lived nearby, I would do the eight hour shifts for you.

I do a lot of stack and slam using two different consistencies of clay. Lately I have found a course wiggle wire is even more effective, especially when spraying some moisture on to the slabs. The wiggle waves hold the water better.
 
best,
Pres

On the work bench, and in the kiln. . .mugs,  honey jars and soon teapots.
best,
Pres

There's an emerging discussion on another thread (re: craft/art) that is looking at the value of, or lack of value of, or even the detrimental impact of, schooling (college/training).  As someone who earned a degree in fine art (ceramics) at an esteemed art school (while on welfare and struggling mightily as a single parent & who was 20 years older than the other students) I must say how extremely enriching, valuable, freeing, and supportive of my creative expression and drive, the experience was. I have carried and used the benefits of that excellent education throughout all aspects of my life, not just in art interactions, but in ctitical thinking, world-view, career, understanding people and cultures, and many other areas of functioning. To me, formal training-- from competant, knowledgible & skilled instructors--is invaluable and can only enhance  one's creative expression and appreciation of crafts & art. What do others think--is formal education/training in ceramics (or any form of art ) stifling/useless/a negative or enriching/useful/a positive?

My bench is clear today, having finished the pieces in prep for the pending anagama fire. I cleaned up my space, and the pile of tools, went and bought some window caddies to hold finishing materials, set up my most-used tools behind my little work slab, and finally got that annoying curtain out of my way--looks tacky, but I was in a hurry and just strung it up with those vegatable ties you get on bok choy--the poor man's Velcro LOL-works great. 

There's an emerging discussion on another thread (re: craft/art) that is looking at the value of, or lack of value of, or even the detrimental impact of, schooling (college/training).  As someone who earned a degree in fine art (ceramics) at an esteemed art school (while on welfare and struggling mightily as a single parent & who was 20 years older than the other students) I must say how extremely enriching, valuable, freeing, and supportive of my creative expression and drive, the experience was. I have carried and used the benefits of that excellent education throughout all aspects of my life, not just in art interactions, but in ctitical thinking, world-view, career, understanding people and cultures, and many other areas of functioning. To me, formal training-- from competant, knowledgible & skilled instructors--is invaluable and can only enhance  one's creative expression and appreciation of crafts & art. What do others think--is formal education/training in ceramics (or any form of art ) stifling/useless/a negative or enriching/useful/a positive?

There's an emerging discussion on another thread (re: craft/art) that is looking at the value of, or lack of value of, or even the detrimental impact of, schooling (college/training).  As someone who earned a degree in fine art (ceramics) at an esteemed art school (while on welfare and struggling mightily as a single parent & who was 20 years older than the other students) I must say how extremely enriching, valuable, freeing, and supportive of my creative expression and drive, the experience was. I have carried and used the benefits of that excellent education throughout all aspects of my life, not just in art interactions, but in ctitical thinking, world-view, career, understanding people and cultures, and many other areas of functioning. To me, formal training-- from competant, knowledgible & skilled instructors--is invaluable and can only enhance  one's creative expression and appreciation of crafts & art. What do others think--is formal education/training in ceramics (or any form of art ) stifling/useless/a negative or enriching/useful/a positive?

I DID...I swear it WAS NOT THERE last night!!!!!!!!! I looked there and in Aesthetics & even Studio (tho I knew it wasn't there.) Thanks---It's a little crazy-making but it's definately there now! 
ANYWAY....here are some handles from when I used to do mugs. They're more like a capital C , maybe, than the other types. I like my mugs on the hefty side, with the handles in balance. 

Here's what's on mine today. In progress--carving the outer surface of what will be a lidded container, assuming all goes well. It's for an anagama fire in the fall--the clay is new to me--Sheffield's Z--which John Baymore recommended, and I just love it-can't wait to see how it fires.  I can afford maybe a half shelf, and I hope to have enough vertical pieces to get the most out of that type of fire.  The kiln, at the NHIA-Sharon Art Center was built by John & his students. I get to join in, provided there is available space, as part of the New Hampshire Institite of Art's public-access Community Education program.  Not shown is the banding wheel, a half dozen trimming tools, foam to  cushion the upside down lid w/knob, porcupine quill, hole cutter, a Chinese Lucky Cat wving his paw, and a large mug of fresh hot dark roast. 

Here's what's on mine today. In progress--carving the outer surface of what will be a lidded container, assuming all goes well. It's for an anagama fire in the fall--the clay is new to me--Sheffield's Z--which John Baymore recommended, and I just love it-can't wait to see how it fires.  I can afford maybe a half shelf, and I hope to have enough vertical pieces to get the most out of that type of fire.  The kiln, at the NHIA-Sharon Art Center was built by John & his students. I get to join in, provided there is available space, as part of the New Hampshire Institite of Art's public-access Community Education program.  Not shown is the banding wheel, a half dozen trimming tools, foam to  cushion the upside down lid w/knob, porcupine quill, hole cutter, a Chinese Lucky Cat wving his paw, and a large mug of fresh hot dark roast. 

Here's what's on mine today. In progress--carving the outer surface of what will be a lidded container, assuming all goes well. It's for an anagama fire in the fall--the clay is new to me--Sheffield's Z--which John Baymore recommended, and I just love it-can't wait to see how it fires.  I can afford maybe a half shelf, and I hope to have enough vertical pieces to get the most out of that type of fire.  The kiln, at the NHIA-Sharon Art Center was built by John & his students. I get to join in, provided there is available space, as part of the New Hampshire Institite of Art's public-access Community Education program.  Not shown is the banding wheel, a half dozen trimming tools, foam to  cushion the upside down lid w/knob, porcupine quill, hole cutter, a Chinese Lucky Cat wving his paw, and a large mug of fresh hot dark roast. 

Here's what's on mine today. In progress--carving the outer surface of what will be a lidded container, assuming all goes well. It's for an anagama fire in the fall--the clay is new to me--Sheffield's Z--which John Baymore recommended, and I just love it-can't wait to see how it fires.  I can afford maybe a half shelf, and I hope to have enough vertical pieces to get the most out of that type of fire.  The kiln, at the NHIA-Sharon Art Center was built by John & his students. I get to join in, provided there is available space, as part of the New Hampshire Institite of Art's public-access Community Education program.  Not shown is the banding wheel, a half dozen trimming tools, foam to  cushion the upside down lid w/knob, porcupine quill, hole cutter, a Chinese Lucky Cat wving his paw, and a large mug of fresh hot dark roast. 

Here's what's on mine today. In progress--carving the outer surface of what will be a lidded container, assuming all goes well. It's for an anagama fire in the fall--the clay is new to me--Sheffield's Z--which John Baymore recommended, and I just love it-can't wait to see how it fires.  I can afford maybe a half shelf, and I hope to have enough vertical pieces to get the most out of that type of fire.  The kiln, at the NHIA-Sharon Art Center was built by John & his students. I get to join in, provided there is available space, as part of the New Hampshire Institite of Art's public-access Community Education program.  Not shown is the banding wheel, a half dozen trimming tools, foam to  cushion the upside down lid w/knob, porcupine quill, hole cutter, a Chinese Lucky Cat wving his paw, and a large mug of fresh hot dark roast. 

Working on the next order for Savannah Bee, mugs, teapots and honey jars. About two thirds complete, all teapots, ready for glazing, 30 mugs and 25 honey jars in present load. On the workbench two days ago was this. . . .

All extruded handles! 
best,
Pres

Just pulled this out of the kiln. One of my better pots with this decoration style.

Figured I would share in the joy of posting stuff on workbench! Waiting on the rest of the load to cool so I can see all the rest of it. Hopefully more as good as this one. It is nice to get a little reward before I take a long pottery break yet again to study. Hopefully I will have time to get back out in the garage and get some more work made!

I DID...I swear it WAS NOT THERE last night!!!!!!!!! I looked there and in Aesthetics & even Studio (tho I knew it wasn't there.) Thanks---It's a little crazy-making but it's definately there now! 
ANYWAY....here are some handles from when I used to do mugs. They're more like a capital C , maybe, than the other types. I like my mugs on the hefty side, with the handles in balance. 

I DID...I swear it WAS NOT THERE last night!!!!!!!!! I looked there and in Aesthetics & even Studio (tho I knew it wasn't there.) Thanks---It's a little crazy-making but it's definately there now! 
ANYWAY....here are some handles from when I used to do mugs. They're more like a capital C , maybe, than the other types. I like my mugs on the hefty side, with the handles in balance. 

My glazing table is down to a few pieces of bisqued  mid-fire items. I need to fill one more shelf with new greenware (they'll go in as a single fire) and then I am ready to fill my kiln again.  
 
 

My glazing table is down to a few pieces of bisqued  mid-fire items. I need to fill one more shelf with new greenware (they'll go in as a single fire) and then I am ready to fill my kiln again.  
 
 

My glazing table is down to a few pieces of bisqued  mid-fire items. I need to fill one more shelf with new greenware (they'll go in as a single fire) and then I am ready to fill my kiln again.  
 
 

Pres those teapots look like they would be fun to make,  I love making teapots.  I hope I can retrain my brain and arm connection so I can throw them on electric wheel I just bought.   I just had the foot pedal adjusted so that made a huge difference.  Losing the ability to throw was the first thing I lost to MS ,  I am slowly retraining my brain , I can throw small bows and cups now.  Mark C found me the wheel on E-bay so I sold my kick wheel  and forging forward with my quest.   Denice

Gabby recently asked in the question pool. . .  . Recognizing that some days are obviously different from others, and some here have studios that are available only in warmer weather or not in really hot weather, what is the typical day, hour block by hour block, during a time of year you are at your ceramic work? The interesting thing in these is the variety in the time of day people spend at their creative work, some starting in the morning and ending at 4, say, others starting at 4 and going into the night, some working at a stretch and others doing a couple of shifts, and so forth. There is also variety in how they spend the times they are not working. Some have a habit, like a walk. The choreographer Twla Tharpe, I believe, takes a cab to the gym every morning for a couple of hour workout. Some people have time specifically dedicated to reading (most of the writers do) or to family/spouse time.
In reply to this of late it has been problematic getting into the shop, and once in, a problem getting out of the shop. I will often go to breakfast with my wife around 7:30, come back to the house around 8:30, check the forum here, check email, check news, while putting in laundry, waiting for the drier, folding clothes and getting other things done. About 10 am, I may get into the shop, but sometimes not until 12:30, then I may work until 6 or 7 pm, and sometimes back at it until 8pm after some dinner. Weekends are the same, Sundays hardly ever unless pressed, Thursday no afternoon, as I bowl, and if the weather is nice I kayak at least once a week. . . . this Summer none yet. Hey! I'm retired!
Now if you had asked me that question in the mid to late 90's, I was in the shop earliest of Spring every night after school from nearly 4 til dinner, 7 til ???? Then back to school the next day at 7am. I did Saturdays all day, and some on Sunday if needed. Once school was out it was in the shop before breakfast, then breakfast, then lunch, and dinner. . . the only breaks in the day til 10 or 11 every night. No in the long run, not fun, and doing shows did not pay well. When offered a itinerant professorship at a local college with me in full control of the curriculum, teaching for two weeks to make more than I made in the entire Summer, I relaxed and made pots when I wanted. 
 
best,
Pres
 

Update: So I've been pretty upset the past two weeks waiting to hear back about a test for a mutation in my blood cells that renders the known forms of drug treatment useless. They did the wrong test twice...anyway apparently third time is the charm and the test came back negative, I'm just responding slower than most, which is very very good news. Thanks for all the nice comments and getting to hear folk's sharing. I wish everyone else a bit of good news in their struggles also. 

Lee, Thank you!  Good topic.
Lenore

Lee, in reference to your speculation that creative people may suffer more than their share of bedevilments, you might find interesting the book Touched with Fire, by Kay Renfield Jamison.  She is a scholar, clinician, and master storyteller whose own bipolar disorder brought her to study the relationship of mental disorders and creativity.  She also looks at the predisposition to the abuse of alcohol and other substances.
There is a strong correlation between great creativity and some mental disorders as well as alcoholism.  In bipolar disorder it is the hypomanic state, the transition state, rather than the poles that connects closely to creative achievement. 
I don't think research suggests that creativity and physical illness or creativity and more general suffering are strongly correlated though. Said differently, people with physical illness who are highly creative would likely have been just as creative had they stayed well. Life hardships in general can cut either way in terms of creativity and creative productivity, sometimes enhancing and sometimes stifling.
( I was a teaching fellow for a course on this subject some years ago when I was doing research in this area).