Chantay Posted November 25, 2014 Report Share Posted November 25, 2014 I make several different mug styles, therefore, I make several different handle styles. Also, just because I don't like the way the handle looks, others may like it. Then handle that looks poorly on this mug may well look perfect on a later made mug. I have also discover that the handle that I thought turned out to big, was perfect for a large hand person. Don't start fretting over the handles till you have pulled a hundred or so. I think consistency is what is going to make them look best, when they are lined up on your sale table and you have ten or so and they all look NEARLY identical. Keep throwing, keep pulling. Link to comment Share on other sites More sharing options...
Benzine Posted November 25, 2014 Report Share Posted November 25, 2014 So potters even will throw a small, bottomless cylinder, and cut them into sections with the needle tool. They'll then cut those rings apart, and use those as handles or lugs. Link to comment Share on other sites More sharing options...
Pres Posted November 25, 2014 Report Share Posted November 25, 2014 Over the years, I have put handles on mugs that were coils, thick carved and stamped coils, wheel thrown loops, extrusions from small and large extruders, press molded, and pulled. Depending on the mug personality, the handle needs to fit. I guess that is where being an artist comes to play. The craftsman repeats and is great at what he does, but when he starts making aesthetic decisions about what goes best with the form. . . . he is an artist. Link to comment Share on other sites More sharing options...
Crusty Posted November 26, 2014 Author Report Share Posted November 26, 2014 I been looking at your blog Pres. I really enjoy your work. Nice detailed carving, you have some skill sir.. Link to comment Share on other sites More sharing options...
Frank Hott Posted December 3, 2014 Report Share Posted December 3, 2014 I may be speaking heresy to this group of fine people, but I purchased a handheld extruder from Scott Creek and love it. Less time spent, consistent form (obviously), and for me less frustration and handling of the clay. The more I touch it, the more mistakes I can make. Link to comment Share on other sites More sharing options...
dhPotter Posted December 3, 2014 Report Share Posted December 3, 2014 Pulling Handles was the only way I was taught. I like the dog bone handle. Can't seem to get the right amount of clay to be left at the bottom and not have the middle too thin and skinny. On the last set of mugs I rolled out a 3/8 inch think slab and cut dog bone shaped handles. Then lightly pulled on the handle to thin it a little in the middle and smoothed the edges with a damp sponge. Will see how it works with this weekend's glaze firing. Hope they don't crack or pull away from the body. Used plenty of scoring and slip. Link to comment Share on other sites More sharing options...
Crusty Posted December 3, 2014 Author Report Share Posted December 3, 2014 isn't there also a hand tool? you just pull it through the clay, it has a round side and a tapered side. Link to comment Share on other sites More sharing options...
Pres Posted December 4, 2014 Report Share Posted December 4, 2014 Have made some of these over the years with strap metal. Works well when wetted. Can have several different shapes to work. Used them with students, did not keep them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.