Denice Posted July 8, 2018 Report Share Posted July 8, 2018 The first few months I worked at a dental lab my job was to boil and steam models sent in by the dentist. Your skin would peel off and you have to wear bandages for the first month. After they healed up I had the smoothest finger free finger tips. I guess I should have committed a crime back then, DNA will convict you now. Denice Quote Link to comment Share on other sites More sharing options...
Pres Posted July 8, 2018 Author Report Share Posted July 8, 2018 Nancylee, we have discussed this in some other threads. I have had trouble having fingerprints made. Such a pain. Imagine the difficulty of id ing a body if little else is found. Now that we have dna testing not so much a problem. best, Pres Quote Link to comment Share on other sites More sharing options...
Mark C. Posted July 12, 2018 Report Share Posted July 12, 2018 Ok today was sponge the load day as well as throwing and trimming. I had my wife shoot these for me just before loading the kiln with them This is what 45 years of hard clay work will do to your hands Marcia Selsor 1 Quote Link to comment Share on other sites More sharing options...
Marcia Selsor Posted July 12, 2018 Report Share Posted July 12, 2018 my finger id for my phone never works. I think they may be worn down. Marcia Callie Beller Diesel 1 Quote Link to comment Share on other sites More sharing options...
Mark C. Posted July 12, 2018 Report Share Posted July 12, 2018 (edited) On 7/12/2018 at 8:15 AM, Marcia Selsor said: my finger id for my phone never works. I think they may be worn down. Marcia The same is true for me-but it may be the technology vs the fact that we wore off our fingerprints-or at least parts of them. Edited July 14, 2018 by Mark C. Marcia Selsor 1 Quote Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted July 13, 2018 Report Share Posted July 13, 2018 On 7/12/2018 at 9:15 AM, Marcia Selsor said: my finger id for my phone never works. I think they may be worn down. Marcia I can't use the fingerprint id either. Quote Link to comment Share on other sites More sharing options...
Babs Posted July 20, 2018 Report Share Posted July 20, 2018 Says it all, well almost. too much neglect Quote Link to comment Share on other sites More sharing options...
Babs Posted July 20, 2018 Report Share Posted July 20, 2018 (edited) Maybe our biceps are the next integral part of the potter's frame I had a friend photo the above and she returned almost immediately with handcream, nail buffers, cuticle cream and oils I would never have dreamt of.... i did try to show my appreciation... too little too late and I never rememer stuff like that.. Edited July 20, 2018 by Babs additional trivia Callie Beller Diesel 1 Quote Link to comment Share on other sites More sharing options...
Babs Posted July 20, 2018 Report Share Posted July 20, 2018 On 7/12/2018 at 12:44 PM, Mark C. said: Ok today was sponge the load day as well as throwing and trimming. I had my wife shoot these for me just before loading the kiln with them This is what 45 years of hard clay work will do to your hands nice feet....on your pots Mark! Lots of great pots there, productionpotter extraordinaire!!! Quote Link to comment Share on other sites More sharing options...
Denice Posted July 20, 2018 Report Share Posted July 20, 2018 Mark is the first ridge on your bowl for catching any running glazes? Denice Pres 1 Quote Link to comment Share on other sites More sharing options...
Mark C. Posted July 20, 2018 Report Share Posted July 20, 2018 (edited) Yes many of my glazes run and a good foot ring catches them.Its also my signature style of foot. A solid strong foot is something most pots need. learning to make a good strong solid non chip foot is a key deal. I spent a year working with a mentee on her foot style.Most just ignore the foot or half -a--one or do not have one.Good feet are part of good pots.All that said I have a few forms that I do not have feet on. I used to 40 years ago foot everything . In my temp range of cone 11 porcelain many glazes are moving and they fill that foot space above the foot. My pie plates for example are flat bottomed but still have the side edge foot that catches glazes. If you are working in cone 06 runny glazes will not be an issue but a good foot on a pot will always look better. Edited July 20, 2018 by Mark C. Pres 1 Quote Link to comment Share on other sites More sharing options...
Denice Posted July 21, 2018 Report Share Posted July 21, 2018 I was taught that the balance and design between the rim and foot was the markings of a well made pot. I work with C6 glazes and only have trouble with running when I layer them. I liked the looks of that foot, I think I will give it a try. Denice Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.