yappystudent Posted June 27, 2018 Report Share Posted June 27, 2018 Necessary? Not necessary? Designs, opinions, =appreciated. Link to comment Share on other sites More sharing options...
Babs Posted June 27, 2018 Report Share Posted June 27, 2018 couple or 3 holes in foot ring can suffice Link to comment Share on other sites More sharing options...
Mark C. Posted June 28, 2018 Report Share Posted June 28, 2018 With large platters I drill 2 holes in top of foot (about 1/8 inch ) holes when shrunk. I use a stainless heavy wire to form a small loop for hanging. Link to comment Share on other sites More sharing options...
dhPotter Posted June 28, 2018 Report Share Posted June 28, 2018 I use an undercut on the inside of the foot. You can then hang the platter on a nail or screw and will not fall off. Also have cut a groove on the outside of the foot to wrap a wire around and make a loop to hang on a nail or screw. Link to comment Share on other sites More sharing options...
Mark C. Posted June 28, 2018 Report Share Posted June 28, 2018 I also have this undercut on my feet but the small holes go under the foot and the small loop is not an issue using the platter or washing it as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.