Harry Potter Posted January 6, 2013 Report Share Posted January 6, 2013 Well, here I am once again. Made a batch of Raku copper luster from book- alternative kilns and firing tech. Recipe notes from workshop noted batch made a gallon. Sooo I mixed up batch ( approx.1,060 grams) added a gallon of water, screened and it ended up very fluid. Any suggestions for reducing the amount of water or thickening up mix, I've already left top off hoping for evaporation. Aside from making up partial additional recipe to add to this batch, I'm at a loss. Any suggestions? It's not like I could add flour to thicken it. But is there anything I could add to thicken without affecting the product. or just bite the bullet and make up partial recipe. Recipe: 750.00 Gerstley borate 250.00 Bone 1000.00 Total add 40.0 Copper carbonate 20.0 Cobalt Oxide Link to comment Share on other sites More sharing options...
Pres Posted January 6, 2013 Report Share Posted January 6, 2013 Well, here I am once again. Made a batch of Raku copper luster from book- alternative kilns and firing tech. Recipe notes from workshop noted batch made a gallon. Sooo I mixed up batch ( approx.1,060 grams) added a gallon of water, screened and it ended up very fluid. Any suggestions for reducing the amount of water or thickening up mix, I've already left top off hoping for evaporation. Aside from making up partial additional recipe to add to this batch, I'm at a loss. Any suggestions? It's not like I could add flour to thicken it. But is there anything I could add to thicken without affecting the product. or just bite the bullet and make up partial recipe. Recipe: 750.00 Gerstley borate 250.00 Bone 1000.00 Total add 40.0 Copper carbonate 20.0 Cobalt Oxide Looks like too much clay to have much settling in the mix, otherwise I would pour off some water. Nope, can't think of anything else than maybe making up a 1/4 batch and adding to the present batch. Link to comment Share on other sites More sharing options...
Mark C. Posted January 6, 2013 Report Share Posted January 6, 2013 Leave it alone for a day or three and with a small cup dip in so the water flows over the lip- just take the top water off and try to not disturb the reast-finish with a large sponge to get all the water. All those materials will settle out in a few days. Evaporation takes too much time unless you live in Tucsan AZ and its summer time. Mark Link to comment Share on other sites More sharing options...
yedrow Posted January 6, 2013 Report Share Posted January 6, 2013 I've laid a box fan across the top, spaced with a couple of 2x4s. Joel. Link to comment Share on other sites More sharing options...
Iforgot Posted January 6, 2013 Report Share Posted January 6, 2013 I'd add two tablespoons of magnesium sulfate solution. if that turns out to be too much add like 4 tablespoons of majic water. or if it is just all settled in the bottom, which could be the problem you could add some cmc gum solution or bentonite. Link to comment Share on other sites More sharing options...
Harry Potter Posted January 6, 2013 Author Report Share Posted January 6, 2013 I love this site, the members are so quick to respond. Good advice all the way around. I did try dipping in the mix and it seems to work, even if brushing seemed weak. May dip a couple of times to be sure thickness is sufficient. Thanks folks. Link to comment Share on other sites More sharing options...
TJR Posted January 6, 2013 Report Share Posted January 6, 2013 Harry; Mark is right. The simplest thing to do is let the batch sit for at least a day if not three, then decant the surface water without mixing up the rest. I would avoid adding anything else. I have on occaision added 3% bentonite. You have to mix it up with water in a small cup with a small amount of water. Then you have to re-sieve your entire glaze. A pain! TJR Link to comment Share on other sites More sharing options...
OffCenter Posted January 6, 2013 Report Share Posted January 6, 2013 Well, here I am once again. Made a batch of Raku copper luster from book- alternative kilns and firing tech. Recipe notes from workshop noted batch made a gallon. Sooo I mixed up batch ( approx.1,060 grams) added a gallon of water, screened and it ended up very fluid. Any suggestions for reducing the amount of water or thickening up mix, I've already left top off hoping for evaporation. Aside from making up partial additional recipe to add to this batch, I'm at a loss. Any suggestions? It's not like I could add flour to thicken it. But is there anything I could add to thicken without affecting the product. or just bite the bullet and make up partial recipe. Recipe: 750.00 Gerstley borate 250.00 Bone 1000.00 Total add 40.0 Copper carbonate 20.0 Cobalt Oxide It's such a simple recipe, why don't you just divide each ingredient by 2 or 3 and add that to what you've already mixed up. Zap! problem solved without all that nonsense about waiting for water to evaporate. Jim Link to comment Share on other sites More sharing options...
Guest JBaymore Posted January 6, 2013 Report Share Posted January 6, 2013 It's such a simple recipe, why don't you just divide each ingredient by 2 or 3 and add that to what you've already mixed up. Zap! problem solved without all that nonsense about waiting for water to evaporate. From my point of view this is THE answer. (Unless you are out of raw materials.) best, .............john Link to comment Share on other sites More sharing options...
Chris Campbell Posted January 6, 2013 Report Share Posted January 6, 2013 Another tip from a lazy potter ... I drape old cotton cloths around the bucket just letting the bottoms touch the surface. Through osmosis your cloths will be wet the next morning speeding up the evaporation process without much effort. I do this with my colored slips since they are easier to blend thin but I like to use them when they are thick. Link to comment Share on other sites More sharing options...
yedrow Posted January 6, 2013 Report Share Posted January 6, 2013 Another tip from a lazy potter ... I drape old cotton cloths around the bucket just letting the bottoms touch the surface. Through osmosis your cloths will be wet the next morning speeding up the evaporation process without much effort. I do this with my colored slips since they are easier to blend thin but I like to use them when they are thick. Like!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.