Gordigit Posted December 23, 2021 Report Share Posted December 23, 2021 Trying to see how much to sell a kiln Quote Link to comment Share on other sites More sharing options...
Gordigit Posted December 23, 2021 Report Share Posted December 23, 2021 3 minutes ago, Gordigit said: Trying to see how much to sell a Quote Link to comment Share on other sites More sharing options...
Mark C. Posted December 23, 2021 Report Share Posted December 23, 2021 take some photos so we can see kiln and give you some ideas Quote Link to comment Share on other sites More sharing options...
neilestrick Posted December 23, 2021 Report Share Posted December 23, 2021 We'll need photos of the outside, serial plate, and inside. Quote Link to comment Share on other sites More sharing options...
Spetricca Posted February 7, 2022 Report Share Posted February 7, 2022 (edited) Hello. I am looking to help my FIL sell 2 kilns along with a large inventory of molds, green ware, and bisques. Can anyone please assist with market value and how to best unload his inventory? I would estimate he has the equivalent of 1 car garage worth. Edited February 7, 2022 by Spetricca Add pictures Quote Link to comment Share on other sites More sharing options...
Spetricca Posted February 7, 2022 Report Share Posted February 7, 2022 (edited) 20 minutes ago, Spetricca said: Hello. I am looking to help my FIL sell 2 kilns along with a large inventory of molds, green ware, and bisques. Can anyone please assist with market value and how to best unload his inventory? I would estimate he has the equivalent of 1 car garage worth. Evenheat 5320xl serial 37758 Model LT-3khttps://piccollage.com/_joW23r37 https://piccollage.com/_joW23r37 Edited February 7, 2022 by Spetricca Quote Link to comment Share on other sites More sharing options...
neilestrick Posted February 7, 2022 Report Share Posted February 7, 2022 4 hours ago, Spetricca said: https://piccollage.com/_joW23r37 For the kilns, it all depends on condition. If the bricks are good then you can easily get $500 on up. The market for used kilns is very good right now. You can list them in the Marketplace here on the forum, or Craigslist, or I think there is still a Facebook page for selling pottery equipment. Include good pictures, including the serial plate and the interior of the kiln. The molds will be more difficult to sell. There's not much demand for them any more, especially for an entire load like that. If you want to spend the time to catalog them and list them there may be rare molds in there that people are interested in. But if you just want to unload the entire batch, that may not happen. Quote Link to comment Share on other sites More sharing options...
JoJoDolphin Posted May 5, 2022 Report Share Posted May 5, 2022 I just moved into a community that has a Sitter Kiln Model Lt-3K. I dont think this has been used for a very long time. Does anyone have an idea about how to try and start this machine and then what to do to see how hot it gets. I remember there were cones that you could put in that would bend or melt at certain temperatures. Any advise or suggestions would be great. Quote Link to comment Share on other sites More sharing options...
neilestrick Posted May 5, 2022 Report Share Posted May 5, 2022 3 minutes ago, JoJoDolphin said: I just moved into a community that has a Sitter Kiln Model Lt-3K. I dont think this has been used for a very long time. Does anyone have an idea about how to try and start this machine and then what to do to see how hot it gets. I remember there were cones that you could put in that would bend or melt at certain temperatures. Any advise or suggestions would be great. Lt-3K is the model of the Kiln Sitter shutoff device, not the kiln itself. The kiln model should be listed on the serial plate on the side of the kiln. In general, one hour with the switches on low, 1 hour on medium, then high till the Sitter shuts it off. SITTER MANUAL HERE Quote Link to comment Share on other sites More sharing options...
Tristarwheels Posted August 9, 2022 Report Share Posted August 9, 2022 Hi, can I get an estimate on how much I should price these cress fx23 p & Duncan DK 820x-2 https://linksharing.samsungcloud.com/5MP0RcoUFeE7 Quote Link to comment Share on other sites More sharing options...
oldlady Posted August 9, 2022 Report Share Posted August 9, 2022 (edited) please read from he first post on january 23, 2017. the question has been answered and you can find the info you seek if you just read the entire thread. it is very frustrating to find people still calling old kilns "Sitter" kilns. Edited August 9, 2022 by oldlady Quote Link to comment Share on other sites More sharing options...
neilestrick Posted August 10, 2022 Report Share Posted August 10, 2022 1 hour ago, oldlady said: it is very frustrating to find people still calling old kilns "Sitter" kilns. I think they're just referring to the Kiln Sitter. There are Sitter kilns and digital kilns. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.