kelseybehr Posted December 25, 2015 Report Share Posted December 25, 2015 Hello! I bought a used Brent C wheel months ago and it runs but it's just a slower than what I'm used to and doesn't stop right when I release pressure on the pedal. I figured I got it at a good price and I had asked someone and they said to get this item: http://www.theceramicshop.com/store/product/2740/Foot-Pedal-Assembly%2C-Brent/and it would apparently fix my problem... but really it made little to know difference. In summary the issue is that the wheel runs slow, and doesn't stop as immediately as I would wish. Any suggestions? Thank you Link to comment Share on other sites More sharing options...
Foxden Posted December 26, 2015 Report Share Posted December 26, 2015 The foot assembly that you posted is inside your pedal. Those colored dials will adjust the upper and lower speed. Adjusting them should take care of your problem. Search the forum or Brent's website for a details on how to make the minor adjustments. Link to comment Share on other sites More sharing options...
MatthewV Posted December 26, 2015 Report Share Posted December 26, 2015 I am under the impression that the newer Brents do not come to a fast stop. I remember always seeking the older ones at university and forgot about the issue until purchasing one. A very annoying feature when trimming. Link to comment Share on other sites More sharing options...
Mark C. Posted December 26, 2015 Report Share Posted December 26, 2015 There is a relationship between the two knobs (blue and red) on is high end speed one is low end-play with both until you get what you like-adjust the high end then get the low end to turn off . It takes a bt of adjusting. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.