Jump to content

Amaco Ancient Jasper Question


Pam S

Recommended Posts

Has anyone tried this glaze? I just took Ancient Jasper out of the kiln. It is a beautiful dark eggplant color, but not what it was supposed to be. I fired the the load to ^6 with a slow cool (medium down to low then off to finish) it was a load of only reds and red/blacks. Refiring perhaps or not firing it with reds? I think I need to change my user name to the Frustrated Firer!

Link to comment
Share on other sites

  • Replies 72
  • Created
  • Last Reply

I have used this glaze twice, each time at ^6 electric oxidation, and both times it has produced a muddy brown color. I did notice the red starts to come out where the glaze has been applied thicker. None the less, I was disappointed in it and don't intend to use it again. After all, how many bisque pieces can you afford to lose?

 

It would be nice to have a glaze techie from Amoco chime in on this. Do you think they read our comments? I sure hope so. It would be nice if all the suppliers actually tried to help point us in the right direction every once in a while. This glaze is new, so perhaps we'll hear from them.

Link to comment
Share on other sites

... It would be nice if all the suppliers actually tried to help point us in the right direction every once in a while.

 

 

Yes, it would... but in my experience they don't reply to questions emailed to them directly, so I wouldn't hold my breath that they will post here. I wouldn't treat my customers that way, but I guess that's pretty old-school these days.;)

Link to comment
Share on other sites

I just took a load out of the kiln and three pieces were in Ancient Jasper. I read somewhere online, don't remember where, that the glaze needs to be fired to cone 5 fast and cooled fast to achieve the red color. I fired to cone 6, slow glaze and placed the pieces where I thought it would be cooler in the kiln. They came out with shades of olive green, dark blue and orange. Quite beautiful. The pieces also need texture for the glaze to break. Don't give up on it yet.

Link to comment
Share on other sites

  • 2 weeks later...

Has anyone tried this glaze? I just took Ancient Jasper out of the kiln. It is a beautiful dark eggplant color, but not what it was supposed to be. I fired the the load to ^6 with a slow cool (medium down to low then off to finish) it was a load of only reds and red/blacks. Refiring perhaps or not firing it with reds? I think I need to change my user name to the Frustrated Firer!

 

 

I absolutely love this glaze and has become a favorite of my clients. The problem that you are having is that you are not applying it thick enough. When I make or purchase a new glaze I always run a test piece putting rings of glaze starting with one coat at the bottom and then two, three and four, I top it off with a thick rim to get a drip break. What I found is that to get a more solid red you need to apply four heavy coats, if you only apply three coats then you get the dark almost black look. What I prefer is to apply three even coats and then apply a mottled coat so that some of the darker breaks come through, see attached picture. I fire to cone 6 oxidation.

 

Mark

post-2826-12872451876418_thumb.jpg

post-2826-12872452540134_thumb.jpg

post-2826-12872453296119_thumb.jpg

post-2826-12872451876418_thumb.jpg

post-2826-12872452540134_thumb.jpg

post-2826-12872453296119_thumb.jpg

Link to comment
Share on other sites

ANCIENT JASPER: Hello all and stay with me as I am and old guy and not blog capable. I am the VP of Technical Services here at AMACO and the engineer that developed this glaze. I am very sad to hear that some of you are having difficulty with this glaze. It is actually a very easy glaze to work with and will yield excellant results. Let me give you a few tips on this type of glaze in general an then some specifics about ANCIENT JASPER.

Many midrange and high fire glazes used by ceramic artists are what I call FLOAT glazes. These are the pretty glazes that tend to seperate out different colors in areas where the glazes are thicker. ANCIENT JASPER is this type of glaze and what it floating out is iron oxide. Iron is one of the more interesting colorants simply because it can be in so many different oxidation states. This simply means that it can make a ton of different colors. With any float glaze, enough thickness of glaze must be applied in order for the excess iron to float to the surface. If the glaze is thinly applied, the glaze will tend to be drier and a very unpleasant color.

This glaze was not developed where any massive amount of glaze needs to be applied. If it had needed this I would have told everyone on the label. We actually never had any issues getting red at all. I always try new glazes on all of our clay bodies to make sure there isn't some issue I need to know of. We also fire them at cone 5 and cone 6 to check stability. We found no issues with this glaze on either account. By now you probably saying, great but it didn't work for me. I will list some good parameters below for you to follow and I am 100% sure you will find this glaze simple to use and that it will yield great results.

1. Temperature: The red color is actually the first color to float and the use of more heat will tend to make it turn to the purples, yellows, browns and black. This means you will tend to see slightly (and I do mean slightly) more red at cone 5 than cone 6. No soak is needed for this glaze and actually soaking it will cause more red to fade into the other colors.

2. Thickness: The glaze must be applied with enough thickness to float the iron.

3. Kiln cycle: I fire all the glazes we develop in an electric kiln at fast, medium and slow speeds. Red color will be developed at all speeds but the faster the firing ~6 hours (tons of red) the better the results. I always quality check each batch at cone 5 in 8 hours. 10-12 hour cycles will cause more red to fade to the other colors. This is most critical within 200 defrees of peak. If your elements are weak and it takes the kiln a long time to achieve the last 200 degrees, you will find less red.

4. Cool down: No special cool down is needed nor will it help develop any red color. Letting the kiln simply shut off and cool naturally is all that is needed.

4. Clay Body: I have tested this on porcelain, typical stoneware bodies, bodies with grog, bodies without grog, brown colored bodies, etc. I develop red on all of them. I have found that when using our #1 Porcelain slip that the color transition away from the red tones is very pronounced (although it makes a rainbow of the other colors). This is because for a cone 5 porcelain slip alot of soft flux is needed to tighten the body. The flux in the body mixes with the glaze and actually makes the glaze softer (simulating more heat).

5. Texture: This glaze loves texture and will make some incredible colors. The texture makes the glaze get thinner and thicker in areas. The thicker the glaze the easier it is for it to stay red. The thinner the glaze gets the hotter that area of glaze gets and it shifts to the other colors.

 

These simple tips should help everybody that wants to make ANCIENT JASPER work. I suggest running a few tests of glaze thickness in your next kiln load and follow the firing rules above. Three nice coats on any typical stoneware body, fired to cone 5 or 6 in 6-8 hours with no soak and no special cooling curve will yield pieces just like the ones we showed in the ads. These were just pots we made in the lab. Honestly I have never actually made a pot that didn't make colors just like those pieces.

I will attempt to post a few more photos here today and next week we will post a board I made with all of our clay bodies fired at slow, medium and fast so you can see the slight differences.

Let me know if this helps.

The photo files are too big to upload. I will have someone help me make them smaller for next week.

Steve.........

Link to comment
Share on other sites

Thank you Steve, so much. I was the poster that lamented the lack of any manufacturer's help, but you and Amoco proved me wrong. I can't wait for your pictures to arrive. In the mean time, I am going to purchase another pint of Ancient Jasper and follow your suggestions. I'm looking forward to good results. For the record, I am a big fan of the entire Amoco PC line, and highly recommend them for potter's that work with glazes "out of the jar". Thanks again.

Link to comment
Share on other sites

Just opened the kiln. I fired it fast with no soak, low for an hour, medium for an hour. When I started seeing red I closed the peeps and lid. About 5 hours until the cones dropped. The witness cones were perfect. The Ancient Jasper was green with only hinds of red (last time it was more of a dark eggplant purple with green). My thought is that I'm not applying the glaze thick enough...

Link to comment
Share on other sites

Pam,

 

May I suggest that I think you are correct in your assumption that you do not have enough glaze applied. I am going to tell you my thoughts on using any new glaze. I would make 6 small test tiles or extrusions (which ever is easier) out of your clay body. Glaze two of them with what you think is the correct amount of glaze (as recommended by the manufacturer and using your glazing technique), glaze two with what you think is not enough glaze and two with what you think is too much glaze. Make sure you actually make an appreciably different application of glaze on the three sets. Fire one of each application thickness laying down (simulates a plate, etc) and fire the other three standing up vertically (simulates a cup or bowl). Make sure you put them on a scrap piece of shelf in case they flow. In firing these pieces you will not only learn what the glaze looks like when it is correct, but you will also find out what it looks like when it is wrong. You will also see the amount of flow you might expect on pieces so you can compensate for this on your ware. Some glazes will show some very distinct differences in all these different applications and firing orientations and others will show very little. Hope this helps.

 

 

Steve.........

Link to comment
Share on other sites

I keep little pinch pots of various sizes and shapes around to test glazes on. Next glaze firing I'm going try a couple with what looks like too much and way too much;0) At least the last ones were showing the reds. I refuse to give up on this glaze as I love the look of it when done properly! Thanks for your help. Just as a FYI, I just ordered a pint of AMACO Palladium to try. I saw a piece done in that glaze and my jaw hit the floor, it was that gorgeous!

Link to comment
Share on other sites

  • 2 weeks later...

I have used this glaze, I got a very bright dark red color with dark blue in textured areas. I applied two thick coats by dipping--it ran alot. Be careful not to get too hot or thick. I had to remove it from kiln shelves. I fired it to cone 6 using the firing schedule from Mastering cone 6 glazes. I will try again, but in a cooler spot of my kiln. I was a bit disappointed, I just haven't found that magical way of firing it yet.

Link to comment
Share on other sites

  • 2 weeks later...

I received a sample of this glaze from a handbuilding workshop I went to in Atlanta. I made a test tile for the glaze and absolutely loved it. I dip my test tiles 3 times at different levels so I can see how the glaze works when applied differently and they also have a break in the tile to see breaks in the glaze. I bought a pint of the glaze to put on a platter I had made. First time I fired it, I got an almost black color and really gritty. I figured out that I had definitely not applied it thick enough. Applied more glaze super thick and fired again. This time I got the same dark color but with streaks of red in the glaze. Not what I was hoping for even though I do like the effect. In my test tile I had a beautiful green with tints of tan and red in it. Guess I will have to do more testing. Will try to post pictures after Wednesday when I go back to school.

Link to comment
Share on other sites

I have a plethora of test pinch pots to go in for a glaze fire. Just haven't had the time to fire, hopefully this weekend. Once again I'm trying the Ancient Jasper. It was put on a small leaf shaped plate with some texture and applied thick. Thanks for the warning about running!!! We'll see... Trying some new commercial glazes, AMMACO, Palladium and Coyote, Opal and Archie's Base. I'm also playing with a couple of home made glazes that I didn't like by adding a few ingredients. Sometimes this feels like I should be chanting, shaking chicken bones and bringing out the magic wand when I fire up the kiln.

Link to comment
Share on other sites

  • 3 weeks later...
  • 1 month later...
  • 2 months later...

You are all very welcome. I don't like anyone to struggle with one of my creations. I am also glad you all like the look of ANCIENT JASPER.

 

Steve...........

 

 

 

Steve,

 

Once you have fired too thin, will adding glaze and refiring be an option to revitalize the Ancient Jasper, or should one just move on from that pot? I have a couple of the "eggplant" colored variations.

 

John Lowes

Sandy Springs, GA

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.