futurebird Posted May 21, 2013 Report Share Posted May 21, 2013 I'm thinking about how I decorate the surface of my teapots. It'd really help to see some videos of people making things like flowers and other nature theamed decoration on the surface of smaller clay objects. What good videos are out there? I've found a lot on "texturing" -- but I want to do more realistic decorations like this: Of course it need not be teapot-- though if it focuses on Chinese themes even better! Link to comment Share on other sites More sharing options...
oldlady Posted May 21, 2013 Report Share Posted May 21, 2013 i do this, not on teapots though. to try it, make a thick slip using the slurry from throwing and crushed, broken up pieces of bone dry clay body. put the whole mess into a blender and turn it on. you are looking for about the consistency of a milkshake. let it sit for a day or so, then just paint the flowers or whatever you like on the pot just after it has been made and just dry enough not to shine. you want to keep the whole pot covered with plastic. add a layer of slip every few hours or days until it is of sufficient thickness. this depends on your humidity level, dry country requires tight wrapping to keep it from drying up too much. if it does, just spray it with water and continue adding slip. then carve it to the shape you like and let it dry slowly until it is thoroughly dry and ready to bisque. i hope i can post a photo of the red fox i did. its nose sticks out an inch from the plate it is on. too bad the plate broke. hope this makes sense. it is late and i painted half of the studio today. bedtime, brain is fried. Link to comment Share on other sites More sharing options...
Min Posted May 21, 2013 Report Share Posted May 21, 2013 It's hard to tell with your pictures but aren't the cherry blossoms and branches sprigged? They look like shallow relief sprigs but I could be wrong. Min Link to comment Share on other sites More sharing options...
futurebird Posted May 21, 2013 Author Report Share Posted May 21, 2013 bigger version. Link to comment Share on other sites More sharing options...
perkolator Posted May 21, 2013 Report Share Posted May 21, 2013 i would also guess those are sprigged details. make a simple positive from clay with a good amount of relief, then slap some plaster over the top of it for a quick sprigging mold/stamp. you could even do this by carving into a piece of clay and bique it. this will be the best method for results you can easily duplicate. next method would be to hand-form the details with either fresh clay or a thick slip to trail on the surface. i'm sure you can find some videos on youtube these days that will get you in the general area you're looking for. Link to comment Share on other sites More sharing options...
jo4550 Posted May 22, 2013 Report Share Posted May 22, 2013 Here is a youtube link of an old Wedgwood 1930's film that shows you the sprigging process. Here is also a link to 2010 CAD archived feature on sprigging http://ceramicartsdaily.org/education/ceramic-art-lesson-plan-making-sprigs/ Johanna Link to comment Share on other sites More sharing options...
bigDave Posted May 22, 2013 Report Share Posted May 22, 2013 Local hero and cool dude, Dave Cuzick love his work adding flowers and such to pots. these folks are very generous, and very sucessful Link to comment Share on other sites More sharing options...
Guest JBaymore Posted May 22, 2013 Report Share Posted May 22, 2013 The relief work on good Yixing is not sprigged. Each element of such designs is hand done with remarkable precision (and the ability to replicate items at a very high level). I was watching an undergrad class on a very similar type of surface technique at Wuxi Institute of Arts and Technology (in Yixing) a couple of weeks ago, and the painstaking time taken with every movement and the intense focus of each student was what struck me the most. While the cheap stuff might involve sprigging.... the decent pots don't. best, ..............john Link to comment Share on other sites More sharing options...
OffCenter Posted May 23, 2013 Report Share Posted May 23, 2013 The relief work on good Yixing is not sprigged. Each element of such designs is hand done with remarkable precision (and the ability to replicate items at a very high level). I was watching an undergrad class on a very similar type of surface technique at Wuxi Institute of Arts and Technology (in Yixing) a couple of weeks ago, and the painstaking time taken with every movement and the intense focus of each student was what struck me the most. While the cheap stuff might involve sprigging.... the decent pots don't. best, ..............john Maybe when you don't have anything else to do (imagine an emoticon of your choice here), you could post about your trip. I know I'm interested and I bet a lot of other people here are, too. Pictures like those here are fascinating. Jim Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.