sawing Posted August 20, 2012 Report Share Posted August 20, 2012 Yay Me! I just ran my kiln for the very first time, all by myself, and it worked. Those of you who have been doing this forever are thinking, "so what?", but I am very excited! I wasn't sure if I would be able to figure out the controls, which turned out to be ridiculously easy. We did blow the fuse, but once my husband replaced it with the correct size, we were fine. Now I have a LOT of glazing to do. Link to comment Share on other sites More sharing options...
atanzey Posted August 20, 2012 Report Share Posted August 20, 2012 Congratulations! I felt the same way when I finished my first firing - and my 'new to me' electric kiln was only a couple of weeks ago! Alice Link to comment Share on other sites More sharing options...
Chris Campbell Posted August 20, 2012 Report Share Posted August 20, 2012 Congratulations ... isn't it great!!! I have been doing this for 25 years and on Sunday I was out in the garage unloading a bisque load that was too hot to touch ... ouch, ouch ouch ... but I kept on going. It never gets old. Link to comment Share on other sites More sharing options...
sawing Posted August 20, 2012 Author Report Share Posted August 20, 2012 My kiln is "new to me", too, and I was apprehensive that it wouldn't work. I didn't pay much for it. It's good to know that this feeling doesn't go away, and that I can look forward to this every time I fire. Gotta go glaze! Link to comment Share on other sites More sharing options...
Marcia Selsor Posted August 20, 2012 Report Share Posted August 20, 2012 Congratulations...now you have to glaze and fire!! It's the beginning of the never ending cycle! Marcia Link to comment Share on other sites More sharing options...
yedrow Posted August 21, 2012 Report Share Posted August 21, 2012 Congratulations. Every success in a world so mysterious as fire and earth is a wonderful. With every mastered skill comes something else that is strange and intriguing. Link to comment Share on other sites More sharing options...
sawing Posted August 21, 2012 Author Report Share Posted August 21, 2012 With every mastered skill comes something else that is strange and intriguing. My family thinks this whole process is strange and intriguing. They stand around watching me throw, trim, load and unload the kiln as though it was a spectator sport. Link to comment Share on other sites More sharing options...
Mark McCombs Posted August 21, 2012 Report Share Posted August 21, 2012 Congratulation, Sawing. It is a big deal. My first bisque firing was a few weeks ago. It was really neat. I have had two glaze firing since. Be sure to double check your wire size from the panel/fuse box to the kiln to insure the correct wire size if you are going to fire at a higher cone later on. Don't need a power failure during glaze fire. Link to comment Share on other sites More sharing options...
Jime Posted October 23, 2012 Report Share Posted October 23, 2012 I just ran into this old thread, and I was happy to hear there are other firing newbs around!! I just got a kiln, and will be taking on my first firing in a few months. Glad to know there are others around trying to figure stuff out, it makes it a little less intimidating! Link to comment Share on other sites More sharing options...
Brian Reed Posted October 23, 2012 Report Share Posted October 23, 2012 That is just great, in fact I am in the same boat as you. I recently fired my first bisque kiln and now I have done 4 bisque fires in my electric. Two weeks ago I did my first galze fire with my gas kiln to ^10 reduction and it also worked great. I had issues with the high fire, but I know what I did wrong and learned what not to do next. Keep it up and keep us informed we can all learn together. Link to comment Share on other sites More sharing options...
Sylvia Posted October 23, 2012 Report Share Posted October 23, 2012 I'm doing my first bisque firing this weekend I'm so glad to hear that all of you are having success Link to comment Share on other sites More sharing options...
Jime Posted October 26, 2012 Report Share Posted October 26, 2012 yay Sylvia!! I'll be rooting for you! let us know how it goes! Link to comment Share on other sites More sharing options...
SmartsyArtsy Posted October 27, 2012 Report Share Posted October 27, 2012 Excited for you; The glaze firing will continue to be a thrill. It's difficult but important not to rush the unveilings (opening the kiln). Enjoy! Link to comment Share on other sites More sharing options...
sawing Posted October 28, 2012 Author Report Share Posted October 28, 2012 Since someone else resurrected this thread, I will update. I have since fired another bisque and two glaze. It's exciting and disappointing to see the successes and failures, but I learn something each time. I have actually sold a couple of pieces; spoon rests, sponge holders, yarn bowls... nothing too brilliant, but still encouraging! On the downside, I have been working a LOT, and have not had any time at all in my studio lately. I gotta fix that. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.