High Bridge Pottery Posted June 22, 2016 Report Share Posted June 22, 2016 I am always a bit too lax with the electrical juice out the wall. Ran a 32amp kiln on 30amp breaker for 3 years although it was fired infrequently. Had relays get stuck on for 12 hours and wires melting during firings. Took a knife to a wire still plugged in and turned on, learnt my lesson. Link to comment Share on other sites More sharing options...
Babs Posted June 22, 2016 Report Share Posted June 22, 2016 I am always a bit too lax with the electrical juice out the wall. Ran a 32amp kiln on 30amp breaker for 3 years although it was fired infrequently. Had relays get stuck on for 12 hours and wires melting during firings. Took a knife to a wire still plugged in and turned on, learnt my lesson. Well the juice from the wall will be a quicker way out than inhaling dust............. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.