Snzanne Posted June 22, 2021 Report Share Posted June 22, 2021 Greetings all! I have access to some real Albany Slip and was thinking I'd play around with it in a few glazes. It looks like the best case result would look like a Tenmoku glaze, is that correct? Just trying to figure out if it's worth the hassle, when my Tenmoku is already tried-and-true. Thoughts? Thank you! Snzanne Link to comment Share on other sites More sharing options...
Roberta12 Posted June 22, 2021 Report Share Posted June 22, 2021 I think you have a nice glaze with just a couple of ingredients, Albany Slip and one of the Ferro Frits 3195 I believe. So, that would be a simple and perhaps affordable glaze to mix? Are you firing to cone 5/6? Link to comment Share on other sites More sharing options...
Mark C. Posted June 22, 2021 Report Share Posted June 22, 2021 Albany alone at cone 10 is pretty sweet -Making it a Tenmoku is a bit of a waste (adding iron) If its cone 6 Roberta pegged it above -just do a few small sample tests to dial it in. Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted June 22, 2021 Report Share Posted June 22, 2021 I’ve been messing around with Alberta slip, frit 3134 and varying levels of red iron. I’ve been getting either an amber or a black. My next step was going to be to alter the frit to see what happened. Link to comment Share on other sites More sharing options...
neilestrick Posted June 24, 2021 Report Share Posted June 24, 2021 How much Albany do you have access to? If not much, then decide if it's really worth your time to run a bunch of tests for a limited amount of glaze. What cone are you firing to? Link to comment Share on other sites More sharing options...
Snzanne Posted July 11, 2021 Author Report Share Posted July 11, 2021 Hey sorry I haven't responded in quite some time! I'm firing to Cone 10. Link to comment Share on other sites More sharing options...
neilestrick Posted July 12, 2021 Report Share Posted July 12, 2021 @Snzanne Bleached Albany c10 Albany Slip 64 Whiting 20 EPK 16 This is a beautiful satin glaze, varies from cream to olive green depending on the clay body. Breaks nicely, it's similar to a fake ash glaze. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.