tomhumf Posted May 10, 2020 Report Share Posted May 10, 2020 I've recently started raw glazing a lot of my pots. At first I was doing this at leather hard but have found it works when they are bone dry too. I'm considering making a stock of tableware to store in bone dry state and glaze to order. Other pots that I have kept on the shelf go kinda old and funky looking, like a dirty bath. I'm wondering if this would affect the glazing or structure of the clay? Obviously they would need a bit of a dust before glazing. My studio is a house garage in the UK, fairly dry but air is humid very often. Link to comment Share on other sites More sharing options...
Babs Posted May 10, 2020 Report Share Posted May 10, 2020 Would storing them in those polystyrene throw away boxes at most supermarket help? The ones with tight fitting lids which broccoli etc come in? I use them to keep moisture in....storing bags of clay in them so would keep stuff dry also...... Link to comment Share on other sites More sharing options...
Mark C. Posted May 10, 2020 Report Share Posted May 10, 2020 Dust will cause you issues with glazing just blow them off with an blast of air from a compressor Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.