grackle Posted June 13, 2023 Report Share Posted June 13, 2023 when the kiln shut off too soon, i looked at data and realized i must have chosen bisque and 05 instead of glaze and cone 5. what should i do???? Quote Link to comment Share on other sites More sharing options...
neilestrick Posted June 13, 2023 Report Share Posted June 13, 2023 Most if not all of your pieces will probably be fine. Some glaze melting will start at bisque temps, but shutting down at those temps usually doesn't cause any problems. Start it back up and fire to cone 5. Babs, Hulk, Magnolia Mud Research and 2 others 5 Quote Link to comment Share on other sites More sharing options...
grackle Posted June 13, 2023 Author Report Share Posted June 13, 2023 7 minutes ago, neilestrick said: Most if not all of your pieces will probably be fine. Some glaze melting will start at bisque temps, but shutting down at those temps usually doesn't cause any problems. Start it back up and fire to cone 5. it is still hot, so i just start it up right now? that was my first instinct, but hesitated Pres 1 Quote Link to comment Share on other sites More sharing options...
grackle Posted June 13, 2023 Author Report Share Posted June 13, 2023 ok, many many thanks. restarted, and it went to segment 3 and my fingers are crossed. thank you for getting back to me so quickly!! Hulk, Rae Reich and neilestrick 3 Quote Link to comment Share on other sites More sharing options...
neilestrick Posted June 13, 2023 Report Share Posted June 13, 2023 5 hours ago, grackle said: ok, many many thanks. restarted, and it went to segment 3 and my fingers are crossed. thank you for getting back to me so quickly!! Yes, the controller will start in whichever segment matches the current temp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.