Gin-Gin Posted June 4, 2023 Report Share Posted June 4, 2023 I can't get it off. It is rusty - put wd 40 in the grease hole but still won't budge Help Quote Link to comment Share on other sites More sharing options...
Mark C. Posted June 4, 2023 Report Share Posted June 4, 2023 (edited) soak the shaft and hole with a penatrating fluid (not wd)-like deep creep or Kroil. let that sit for a few days adding more ,then slight heat with portable hand torch on wheel head not shaft to expand it. Then pull or thread off Edited June 5, 2023 by Mark C. Rae Reich 1 Quote Link to comment Share on other sites More sharing options...
neilestrick Posted June 5, 2023 Report Share Posted June 5, 2023 Depending on when it was made, a new head may or may not fit it. If yours is a CI wheel, it was made before Speedball took over those wheels, and I don't know if Speedball changed the design or not. You'll need to call Speedball and see what they know. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.