Teddybaebae Posted December 7, 2021 Report Share Posted December 7, 2021 Morning I have a question about clay additives before I go ahead and start experimenting. Is there a list available of what can be added to clay and what happens when fired. I've got some st Patrick’s clay and would like to make it more textured and grainy. I was thinking of adding sand but that doesn’t seem to be the way to go. thanks in advance. Link to comment Share on other sites More sharing options...
PeterH Posted December 7, 2021 Report Share Posted December 7, 2021 You might find Kathleen Standen's book Additions to Clay Bodies of interest. Sampler at:https://www.yumpu.com/en/document/read/19109768/download-a-free-excerpt-ceramic-arts-daily UK prices https://tinyurl.com/2p8tsuzf Link to comment Share on other sites More sharing options...
Teddybaebae Posted December 7, 2021 Author Report Share Posted December 7, 2021 Thanks very much certainly worth a look. So there isn’t a source or directory of add this to clay and this happens Link to comment Share on other sites More sharing options...
PeterH Posted December 7, 2021 Report Share Posted December 7, 2021 10 minutes ago, Teddybaebae said: So there isn’t a source or directory of add this to clay and this happens I suspect that there is info somewhere about "formulating a clay body", which might include adding grog for texture and iron/manganese for speckles. Is that your interest, or are you wanting to try more "decorative" additions? If it's just texture you want you might start with :Grog https://digitalfire.com/material/grog Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted December 7, 2021 Report Share Posted December 7, 2021 4 hours ago, Teddybaebae said: So there isn’t a source or directory of add this to clay and this happens Not for absolutely every material, no. And you can definitely put sand into clay, but the question is what kind of sand? Sand has different compositions based on the parent rock. When I was at NCECA in 2019, Rimas Visgirda gave a talk about his work, and a big part of that is different kinds of inclusions. He talks about coarse grades of feldspar and quartz, as well as using things like chicken grit and different kinds of sand. It’s not an exhaustive list, but it does talk about a few things that are used for off label purposes. The images don’t start for a few minutes, so don’t be concerned. The discussion of specific inclusions is towards the back half of the video. Link to comment Share on other sites More sharing options...
Teddybaebae Posted December 8, 2021 Author Report Share Posted December 8, 2021 Thanks for the updates. The clay I’m using at the moment is very smooth and I wanted to make it more textured and rough. Almost a bit happy in places. happy to give grog and iron/manganese a try. Link to comment Share on other sites More sharing options...
PeterH Posted December 8, 2021 Report Share Posted December 8, 2021 22 minutes ago, Teddybaebae said: Thanks for the updates. The clay I’m using at the moment is very smooth and I wanted to make it more textured and rough. Almost a bit happy in places. happy to give grog and iron/manganese a try. Just to emphasise the iron/manganese oxides are for visual speckles, not texture. Link to comment Share on other sites More sharing options...
Teddybaebae Posted December 11, 2021 Author Report Share Posted December 11, 2021 So what could you add other than grog for texture? Link to comment Share on other sites More sharing options...
Min Posted December 12, 2021 Report Share Posted December 12, 2021 8 hours ago, Teddybaebae said: So what could you add other than grog for texture? There are good suggestions in the link @Callie Beller Diesel posted above. If you try chicken or chick grit make sure it's the type made from granite and not seashells. I haven't used it but I noticed one of the big box stores on this side of the pond carries a few colours of decomposed granite ground cover, that might be something you could look into in the U.K. that would be worth trying. It would probably need sieving to get the size bits you are looking for. If you want something to burn out of the clay to leave voids there are all sorts of things that will work, just a question of trying various combustibles and seeing if you like the finished result. Coffee grounds, rice, sawdust etc. Link to comment Share on other sites More sharing options...
Hulk Posted December 12, 2021 Report Share Posted December 12, 2021 Sand is mentioned above also (somewhere...) - several of the clays I've tried have some sand in them. Some sands are "sharper" than others (where the edges aren't as worn down/smoothed). Sand doesn't absorb water; however, I believe some grogs do, which can accelerate the clay's absorption of water (and hence, also speed up drying). Silica Sand (digitalfire.com) Link to comment Share on other sites More sharing options...
Teddybaebae Posted December 13, 2021 Author Report Share Posted December 13, 2021 On 12/12/2021 at 3:22 AM, Min said: There are good suggestions in the link @Callie Beller Diesel posted above. If you try chicken or chick grit make sure it's the type made from granite and not seashells. I haven't used it but I noticed one of the big box stores on this side of the pond carries a few colours of decomposed granite ground cover, that might be something you could look into in the U.K. that would be worth trying. It would probably need sieving to get the size bits you are looking for. If you want something to burn out of the clay to leave voids there are all sorts of things that will work, just a question of trying various combustibles and seeing if you like the finished result. Coffee grounds, rice, sawdust etc. I also really the like the idea of adding household things to the outside of the clay for effect. This is my first firing so my experience is very very narrow Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.