Luckystudio Posted April 20, 2021 Report Share Posted April 20, 2021 Hi my controller has decided to pack up I have a front loader kw9 cromartie kiln I was wondering do all controllers fit your program to controller ..? I hope that makes sense I’d love some opinions I don’t wanna buy something that doesn’t go with my Kiln cheers Lucky Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted April 20, 2021 Report Share Posted April 20, 2021 Hi @Luckystudioand welcome to the forum! I’m going to take the liberty of retitling your question, so that it gets more responses. I’m sure someone will chime in. Link to comment Share on other sites More sharing options...
Chilly Posted April 21, 2021 Report Share Posted April 21, 2021 On 4/20/2021 at 11:52 AM, Luckystudio said: do all controllers fit your program to controller Probably, possibly, maybe. My kiln came with very basic on/off/temp dials. I bought a Stafford controller which replaced that box of dials. Check with suppliers, they usually know what they are selling. I fire a kiln at the community centre which has an Ipco controller. Does the same job as my home kiln's Stafford, but I'm more comfortable with programming the Stafford - even though under the old "normal" I fired the center kiln most weeks. Link to comment Share on other sites More sharing options...
neilestrick Posted April 21, 2021 Report Share Posted April 21, 2021 Most controllers function about the same in terms of powering relays, but they aren't all the same size and don't all have the same features. I'd start by calling Cromartie. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.