Tia Sculpt Posted May 28, 2020 Report Share Posted May 28, 2020 Hello! I just went to run my kiln and everything seems to be working fine but the small red light that usually goes on when pressing the plunger in went out shortly after flipping the first switches? I can hear it running and seems like it's all good, I just wasnt sure if I need to replace a small lightbulb or if it's a more serious issue? Thanks for any advice !!! Link to comment Share on other sites More sharing options...
neilestrick Posted May 29, 2020 Report Share Posted May 29, 2020 If the elements are still working, then there's no need to replace the bulb. If you want to replace it, it would be an easy fix. Link to comment Share on other sites More sharing options...
Sorcery Posted May 29, 2020 Report Share Posted May 29, 2020 I hope everything went well. I would look into it. Last thing you want is a fire from THAT! Sorce Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.