Elizabeth96 Posted July 26, 2019 Report Share Posted July 26, 2019 I had to repair main electrical and removed wires from switches the pictures I took are not helping me put it back together. Anyone have a diagram for this? Link to comment Share on other sites More sharing options...
CactusPots Posted July 26, 2019 Report Share Posted July 26, 2019 If you call Laguna directly, you can ask for tech support on the Pacifica wheel. Link to comment Share on other sites More sharing options...
Elizabeth96 Posted July 26, 2019 Author Report Share Posted July 26, 2019 Called them waiting on call back. I am just impatient I guess. Link to comment Share on other sites More sharing options...
Mark C. Posted July 26, 2019 Report Share Posted July 26, 2019 I would call back again Link to comment Share on other sites More sharing options...
CactusPots Posted July 27, 2019 Report Share Posted July 27, 2019 This might or might not pertain to your problem with Laguna. I've called them 4 or 5 times now about the issue I had with my belts. Never failed to speak with someone in their tech support. When dealing with an auto attendant voicemail, I usually "zero out". If you speak to someone, they can find you a person. If you make a choice off the tree, you might get a mailbox no one checks. This is the world I escaped from this year. I programmed these things since they came into common use. Link to comment Share on other sites More sharing options...
ParkeLie Posted August 8, 2019 Report Share Posted August 8, 2019 Hi... It is likely a cheap stamped steel sheave. Likely A/B rated - would go with the cheap. The extra band is possibly to close the sharp vee where the two stampings are put together - something of concern for the little round belts. printed circuit board Link to comment Share on other sites More sharing options...
Bill Kielb Posted August 8, 2019 Report Share Posted August 8, 2019 On 7/26/2019 at 7:48 AM, Elizabeth96 said: I had to repair main electrical and removed wires from switches the pictures I took are not helping me put it back together. Anyone have a diagram for this? If you are still stuck, post old pics and maybe a new one or two. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.