Carly Posted June 27, 2019 Report Share Posted June 27, 2019 I just finished my senior year of high school, and I had done a lot of experimenting with slip casting at home (we didnt have the resources/time to do it at school). I kept my used slip in a few empty plastic coffee containers, and my fresh stuff in a large square plastic container. I hadnt been able to use my slip for about a month, but when i went to check on it there’s green stuff floating all around in it, which I think is mold. It’s a stoneware clay, and I kept my container out side, with a bag covering it, because I dont think the lid has an air tight seal on it. What should I do with this slip? Should i let it dry out if it’ll kill off the mold and just rework it after? Would mixing it or adding something help? Link to comment Share on other sites More sharing options...
neilestrick Posted June 27, 2019 Report Share Posted June 27, 2019 Just mix it up really well. The mold shouldn't hurt anything as long as it's not clumpy. Link to comment Share on other sites More sharing options...
Chilly Posted July 4, 2019 Report Share Posted July 4, 2019 As @neilestrick says, just mix and use. The green stuff is organic and will burn off . Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.