Betty Jean Posted March 23, 2019 Report Share Posted March 23, 2019 Any Suggestions how to clean molds that were drowned with flood waters? Link to comment Share on other sites More sharing options...
oldlady Posted March 23, 2019 Report Share Posted March 23, 2019 so sorry you have to ask this question. hope everything else has survived. maybe ask the gypsum manufacturer of drywall, plaster is their business so maybe they know. Link to comment Share on other sites More sharing options...
Denice Posted March 23, 2019 Report Share Posted March 23, 2019 The only thing I could think of is to test your least favorite mold. Soak it in some water with bleach and then put it in let it dry. When it isn't soaking wet anymore and the bleach seems to have done it job you can put it in a 180 oven and finish drying it. Above 180F damages the plaster structure, if your oven temperature is off try 150F. Denice Link to comment Share on other sites More sharing options...
Mark C. Posted March 24, 2019 Report Share Posted March 24, 2019 wash and dry them as everyone says-180 is tops on temp. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.