justin1287 Posted January 23, 2014 Report Share Posted January 23, 2014 Does anyone know how to do this: I really just want to figure out how to bond glass to the bottom of my pots! Thanks Link to comment Share on other sites More sharing options...
Guest JBaymore Posted January 23, 2014 Report Share Posted January 23, 2014 分ã‹ã‚‰ãªã„。ã§ã‚‚ã€é¢ç™½ã„ã§ã™ã‚ˆã€‚ I don't know. But it is interesting! I'll ask some of my Japanese ceramist friends if they know. best, ................john Link to comment Share on other sites More sharing options...
Tyler Miller Posted January 23, 2014 Report Share Posted January 23, 2014 I'd be willing to bet it was done by glass soldering. Ceramics bonding using solder glass frit - Springer Link to comment Share on other sites More sharing options...
Guest JBaymore Posted January 23, 2014 Report Share Posted January 23, 2014 Tyler, Fascinating abstract....... I'm tempted to buy it. Thanks. Yup...... I think you likely nailed it. best, ....................john Link to comment Share on other sites More sharing options...
Mark C. Posted January 25, 2014 Report Share Posted January 25, 2014 I think glass solding is the most likley I know folks who glue glass tops on to ceamic bases with e-6000 glue. Mark Link to comment Share on other sites More sharing options...
Tyler Miller Posted January 25, 2014 Report Share Posted January 25, 2014 John, I'm glad you enjoyed the abstract. I feel bad that it's behind a pay wall (came up free from where I posted), but it's a good illustration of the process. Mark, e6000 is a great idea! Link to comment Share on other sites More sharing options...
Mark C. Posted January 25, 2014 Report Share Posted January 25, 2014 I knew another poduction potter like me who made ceramic stem goblets but the hundreds and used the e-6000-seemed to hold libby glass tops well. I did at one time glue lots of brass tops to oil candle wick ceramic bottoms-that stuff held metal and ceramics very well.Am I glad I stopped making those. I still have one for power outages but now with a backup natural gas generator its not needed. Mark Link to comment Share on other sites More sharing options...
Roberta12 Posted January 26, 2014 Report Share Posted January 26, 2014 I agree with the e6000 for an immediate fix. I am using it right now with a piece I have hanging outside, in Colorado climate, house on the hill, lots of wind and wide swings in temp. It seems to be holding just fine! I LOVED the video! r. Link to comment Share on other sites More sharing options...
BetsyLu Posted February 1, 2014 Report Share Posted February 1, 2014 If you do use e6000, it would be good to rough up the glass surface you are bonding it to a little. Sandblasting works well but if you don't have access to a sandblaster, use emory paper (UNDER WATER. You don't want to breathe that crap.) Good luck! Link to comment Share on other sites More sharing options...
Norm Stuart Posted February 1, 2014 Report Share Posted February 1, 2014 An overview of the concepts are repeated outside of a firewall http://en.wikipedia.org/wiki/Glass_frit_bonding John, I'm glad you enjoyed the abstract. I feel bad that it's behind a pay wall (came up free from where I posted), but it's a good illustration of the process. Mark, e6000 is a great idea! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.