mudd Posted February 1, 2018 Report Share Posted February 1, 2018 Have a 1995 Brent CXC that I'm the sole owner...and the wheel turns on and spins strong and it can be switch to spin reverse no problem but the pedal will not adjust the speed from stop to fast...thought it was module in pedal, but I just replaced it and the same, just spins at one speed....... What should I check? Link to comment Share on other sites More sharing options...
neilestrick Posted February 1, 2018 Report Share Posted February 1, 2018 It's not the pedal, and it's not the motor, so that leaves the controller. Call Brent, but they'll probably have you send the controller in. They'll usually fix or replace it for materials cost only, no labor. Link to comment Share on other sites More sharing options...
Mark C. Posted February 1, 2018 Report Share Posted February 1, 2018 Its the controller -thats all that left . You can replace the board yourself or send the controller in and they can do it. Link to comment Share on other sites More sharing options...
mudd Posted February 2, 2018 Author Report Share Posted February 2, 2018 Thanks for the quick responses I have reached out to Amaco....we will see. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.