Bryan Johnson Posted May 16, 2017 Report Share Posted May 16, 2017 What is the glaze like when you refire it? Here are a couple of non-standard ideas that might take advantage of soluble borax. Apply glaze to damp pot and let dry slowly, hopefully encouraging the borax to migrate to outer surface of glaze. Apply a very thin layer of borax to an already fired pot, by heating the pot and then spraying a solution of borax on the surface. Link to comment Share on other sites More sharing options...
Joseph Fireborn Posted May 19, 2017 Report Share Posted May 19, 2017 There was no evidence that the hold at 2095F changed any of the tiles. I will look closer later but at first glance it did nothing. Just wanted to update. Still plenty of bubbles. Edit: I went back and checked again with both grid tiles side by side. I noticed no difference in bubbles between the grids. If the hold at 2095F is supposed to reduce bubbles, it didn't do anything for me. Link to comment Share on other sites More sharing options...
High Bridge Pottery Posted May 19, 2017 Report Share Posted May 19, 2017 Good to know, a hold on the way up or down seems to have no results at all. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.