Columbine Posted March 13, 2016 Report Share Posted March 13, 2016 How could I achieve such fine detail like the picture. I tried using a stain with jade glaze on top and the drawing ran a bit. It was a cool affect but I'm also interested in fine detail. Link to comment Share on other sites More sharing options...
Benzine Posted March 13, 2016 Report Share Posted March 13, 2016 If I were trying to replicate that, I'd use underglaze pencils. Link to comment Share on other sites More sharing options...
MatthewV Posted March 13, 2016 Report Share Posted March 13, 2016 Can also be decals or a printed process for the originals. Link to comment Share on other sites More sharing options...
Columbine Posted March 13, 2016 Author Report Share Posted March 13, 2016 Where can i find decals? Link to comment Share on other sites More sharing options...
bciskepottery Posted March 13, 2016 Report Share Posted March 13, 2016 http://rothshank.com/justins-work/decal-resources/ If you go to the Forums main page and search "decals" you will find a number of previous discussion threads on using decals, sources, etc. Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted March 13, 2016 Report Share Posted March 13, 2016 http://www.foragestudios.com/decal-love/ Also this lady. You send her a pdf of any and, and I mean *any* image (plus some money), she sends you decals. And she's hilarious. Link to comment Share on other sites More sharing options...
bciskepottery Posted March 14, 2016 Report Share Posted March 14, 2016 You send her a pdf of any and, and I mean *any* image (plus some money), she sends you decals. Hopefully not copyrighted material unless you have the owner's permission. Link to comment Share on other sites More sharing options...
1515art Posted March 14, 2016 Report Share Posted March 14, 2016 I've watched the artists work under glazing very large porcelain vessels with cobalt oxides in the factories in China, one of the techniques they use is to first start with a pattern of the design printer (transfer) onto the vessel. The painter then brushes a thin layer of latex over the design and then quickly uses a stylus to scrape the wet laytex off the pot over the design lines. They do this a small area at a time until the entire design is exposed through the laytex mask. When the laytex is throughly dry they brush on the oxide and after the oxide dries they peel off the laytex masking leaving behind very clean lines and very intricate designs. This is all done on green ware and single fired to 1300 c, they have the glaze and under glazes down to a fine science from centuries of trial and error and due to the consistent application of materials and controlled firings achieve very clean results. Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted March 14, 2016 Report Share Posted March 14, 2016 You send her a pdf of any and, and I mean *any* image (plus some money), she sends you decals. Hopefully not copyrighted material unless you have the owner's permission.Of course! Her aim wth this venture is to provide decals to artists so they can add extra layers to their work, not people looking to make dodgy knockoff merch. She's a former instructor of mine when I was at ACAD, and she's now an instructor at NSCAD. She takes a dim view of plagiarism. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.