High Bridge Pottery Posted September 7, 2014 Report Share Posted September 7, 2014 I am looking to buy a large amount of high temp wire for my kiln. I think the main wires coming from the plug need replacing. What would be the best way to do this? What different options do I have for the wire? I bought 4m of high temp silicone wire but it was quite expensive per metre. What gauge would you recommend? I think what I have is 8 but I can't remember the numbering system ever. I would prefer to over spec. Can you buy a three core high temp wire? I am not expecting it to be cheap, I want to buy a big roll. Don't mind about the colour. Will be needing it for the next 50 years I think. Link to comment Share on other sites More sharing options...
Wyndham Posted September 7, 2014 Report Share Posted September 7, 2014 Are you talking about from element to relay or element wire or from breaker to kiln electric wire. Wyndham Link to comment Share on other sites More sharing options...
High Bridge Pottery Posted September 7, 2014 Author Report Share Posted September 7, 2014 Element to relay, but also from relay to plug. It all seems to be the same wire. Link to comment Share on other sites More sharing options...
neilestrick Posted September 8, 2014 Report Share Posted September 8, 2014 http://hotkilns.com/parts?field_parts_kiln_series_nid=All&field_parts_obsolete_series_nid=All&title=wire&PN= Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.