Nawaf Posted March 13 Report Share Posted March 13 (edited) Second post about this kiln, After managing to connect all the wires and replace the thermocouple and bought new controller only the red light working but nothing else, i have checked the contactor (i hope this its name), and its not turning on always on 0, i have tested continuity of all wires and all fine, and i have tested the ohm resistance of the contactor and its fine, kindly advise, Solved: found one of the mains fuses are blown, replaced it and finally the kiln is working fine Edited March 13 by Nawaf Solved Hulk 1 Quote Link to comment Share on other sites More sharing options...
PeterH Posted March 13 Report Share Posted March 13 Te previous thread is at Quote Link to comment Share on other sites More sharing options...
Nawaf Posted March 13 Author Report Share Posted March 13 1 minute ago, PeterH said: Te previous thread is at Thank you Peter Quote Link to comment Share on other sites More sharing options...
Nawaf Posted March 13 Author Report Share Posted March 13 1 hour ago, PeterH said: Te previous thread is at Thank you Peter Quote Link to comment Share on other sites More sharing options...
Nawaf Posted March 13 Author Report Share Posted March 13 Im so excited for the kiln that i didn’t even check mains fuse before posting this question found one fuse blowin, I’ll replace and i hope its will work this time neilestrick 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.