artessnoir Posted March 18, 2021 Report Share Posted March 18, 2021 Hi, I'm on the hunt for similar lamp pieces as in this photo, mainly the gold ring at the top that keeps it in place? What is that called? I can't find it anywhere! Link to comment Share on other sites More sharing options...
neilestrick Posted March 18, 2021 Report Share Posted March 18, 2021 Try https://www.grandbrass.com/ Link to comment Share on other sites More sharing options...
Callie Beller Diesel Posted March 19, 2021 Report Share Posted March 19, 2021 If you only need a couple, most hardware stores will carry something. Lowes, Home Depot, Canadian Tire, etc. Link to comment Share on other sites More sharing options...
Dick White Posted March 19, 2021 Report Share Posted March 19, 2021 They are called vase caps. As Neil suggested, grandbrass is my go-to for lamp making supplies. They come in various diameters and profiles (flat, domed) so you either need to know exactly what size and shape you need after your lamp base comes out of the kiln, or get several in different sizes to fit whatever the kiln gives you. And then you need to devise some sort of inner bracket to screw the threaded pipe against so the lamp socket, etc. is held upright firmly in place. Link to comment Share on other sites More sharing options...
artessnoir Posted March 19, 2021 Author Report Share Posted March 19, 2021 grandbrass is great. Thanks for the help! I love this board Link to comment Share on other sites More sharing options...
neilestrick Posted March 19, 2021 Report Share Posted March 19, 2021 The quality of fittings and sockets at Grand Brass are a million times better than the kits they sell at hardware stores, and very reasonably priced. They have all sorts of parts that are handy for all sort of projects. I even used lamp parts from them to build my banjo: Link to comment Share on other sites More sharing options...
Dick White Posted March 19, 2021 Report Share Posted March 19, 2021 And not to put too fine a point on it, Grandbrass has all the stuff you need to properly fit a lamp fixture (e.g., inserts for the threaded pipe to protect the wire, strain relief for the cord, etc.) that the hardware store kits just don't include. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.