Jump to content

I'm a son of Sisyphus - firing a gas kiln, help needed


Recommended Posts

 

On 7/8/2020 at 8:36 PM, postalpotter said:

 

 

 

Thanks to all!

Sorcery, thanks for breaking things so I don't have to! I really don't produce enough to not make that a painful exercise! 

Mark,  thanks again for helping to soothe my fears and arming me to fight off the gremlins.

Neil, always safety first.  Some of the neighbors are pretty sure I may blow-up the block!

I broke some more things and found some carbon coring. Broke some old stuff and found less, but still existant carbon coring.

Going to focus on a few more holds at specific temps to oxidize that. And leave the peeps open for max oxygen.

Blow the block up!

 

Sorce

 

Last firing of "Debbiezula" results.....

 

I kept all the peeps open, full primary and secondary air, full chimney/damper open till about 1900F on the Pyro then reduced.

Ooooooo- it feels good!

Last firing left, above firing right and Right!

Sorce

 

20200724_170316.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.