Katawomp Posted December 28, 2019 Report Share Posted December 28, 2019 https://photos.app.goo.gl/sA4GWePsvoQtE7gx6 Above is a link to the photo of an Eagle I sculpted. I mistakenly used low fire glazes on the head and feet while using cone 6 glazes on the body. Can I paint low fire glazes on the body to correct the problem? What would happen if I painted a low fire clear glaze on the body and re fired low range? Is there anything I can do to salvage the project? https://photos.app.goo.gl/sA4GWePsvoQtE7gx6 Link to comment Share on other sites More sharing options...
Chilly Posted December 29, 2019 Report Share Posted December 29, 2019 If you have some of the glazes left, I would make a small piece of clay, with simalar texture to your eagle. then apply the different glazes in the same way, fire it and see what happens. If it's OK, then you might want to risk your eagle. If the test doesn't work, your eagle is still OK, and you've only lots time. Re-firing low and hire-fire glazes can have some weird effects. Test, test, test Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.